Bosch Bulldog Xtreme 1125VSR Quick Review! 

Thanks. That's why I made the video. I just want to see a tool and what its maximum capabilities are. An unboxing video doesn't do that.

Thanks for the comment. That's why I made this video. I couldn't find any other videos showing if this could actually tear up a concrete floor or not.

Very true. I ended up having to move some more pipe and borrowed a larger jackhammer To do it. Still happy I have this for smaller jobs though.

Glad it helped!

Not too hard to move the toilet however it does take some time. The foam is just sil plate foam (foam that goes under 2x4 on concrete to provide a moisture barrier). Wrap it around the pipes a few times then pour the cement, when the cement dries you pull the foam out and it leaves a void. This void in the concrete is required for the toilet flange to fit properly. I have a another video that kind of shows this. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Fuwc4wMZRXE.html

@@billjonesnation thanks. Will give a shot. My builder put all the rough in’s in the wrong spot. I guess that’s why they call them rough in’s lol

I was just trying whatever worked. I'm no expert.

That would be a good idea, but unfortunately wasn't the case. There is one drain far away from this area.

Yes. Great idea. I tried that in one corner where I had to break through a thicker area. It helped and made the demo very controllable as far as material I wanted removed.

I don't recall. It's been packed away for a couple years since I used it for this project.

on amazon seearch for "Bon Straight Edge" Bon is the brand name. I have an 8 ft and 6 ft

Yea there like around 100 bucks

@@manlymanyo2511 The price varies a lot. Mine were around $60 CAD when I got them.

That's too bad. How old is your bulldog and has it seen a lot of use ? Maybe contact the manufacturer and see about warranty?

With all that dust

Yes, grease the bits before they go in the tool.

@@billjonesnation when they get hot is it normal or i should give it a break and what type of grease is good one

@@davindergill1888 I think it's normal to get a bit hot during use. Been a while since I used mine. I would probably give it a small break though if it's super hot. This isn't a super heavy duty tool like a construction site jack hammer nor do I expect it to be. I used Makita 194683-7 Grease Vessel from Amazon. I don't think it matters much what grease you use. This stuff seems to work fine.

@@billjonesnation thank You Very Much

Grab the handle and firmly twist it counterclockwise. It will loosen the handle, then you can slide it to different positions and re-tighten. The first time you loosen it may take some force. Mine was very tight.

@@billjonesnation thank you much Yes just got it brand new and it was very tight I appreciate it 👍👍

That tools really best for peeling up tile and cleaning out mortar joints on rock walls. You need to go out to one of the bigger sizes of that machine to get the concrete busted out. You use it trying to bust out 3 to 4 inch+ concrete. You'll be rebuilding it at about 2/3 the cost of new every other job. Pick the right tool for the job.

@@chasl3645 On the one hand, a person should pick the right tool for the job, you're right. This isn't the proper tool for this. The issue is though, the proper tool costs 4 times what this tool costs. So, even though this tool isn't meant for this purpose.... It got the job done.

@@chasl3645 indeed my friend

$219.00 at lowes. Tool only. Chisels are about $15. Each.

How is your new bulldog running? I still love mine.