Superb NEW Cutting Saw for cutting wood, metal, plastic. in my case I chose to facilitate the work of the garden. I also cut a metal bar to show the power. good vision at all
I have the 12V version and I hate it. I don't know where you live but hands down the best tool for the type of wood you are cutting in this video is the Black & Decker Alligator. You can get it in a corded or cordless version.
Pro1er I have the corded Alligator is just shit after maybe twenty cuts it was cutting slower and slower until the motor failed a friend of mine has the 12volt saw and he likes it very much and I tried it and in my opinion it was pretty also in general the 12 volt series from Bosch is pretty darn good
3 года назад
Very nice test video. Keep going. How long can you use the battery, wenn you continously cutting wood?
Use a long handle gardener type anvil scissor pruner only 1 quick snap for anythings up to 2 inches at only 1/10th the price and never needs silly batteries replacement or charging.
You are right but For small works it’s faster. Believe. With a chainsaw you have to make the mix of gasoline and oil, oil chain , noise, smell, and then clean the chainsaw. For bigger works I use of corse a chainsaw!
What a waste of money. By the way this is quite expensive since it's blue Bosch Professional. Better use chainsaw, buy a LI-on chainsaw from Bosch and you cut like a champ..
Get a small chainsaw and forget about this.. in a few second that you cut one piece with this bosh thing.. with a small chainsaw i cut at least 5 or 6 pieces at that dimension.
I have. But it is much easier for small works to use this tool. Don’t forget that for such small amount of work you have to put oil gasoline clean after work. This tool you clean in 0 seconds.
Another important think: in this case as I told in the video I will use for barbecue. I don’t like to use wood cut with chainsaw because it leaves chemicals oils on the wood. Not good for taste and health
@@superbluedavide Ahh.. from the chainsaw chain..is that you ment? That is unsignifiant really. and if the chainsaw oil is not full sintetic is not even matter.. but hey.. is your choice.. and i respect that. just saying.
maybe you are right, but it depends on the use you want to make of it. For quick cuts where you don't want to get your hands dirty with petrol, you don't want to have the bother of having to turn on then turn off the engine and remove the gasoline that is mixed by you with oil, then put the oil in the chain, see if your chain blades are sharp, this is a brilliant solution. clearly if you have to do some intensive work, this is definitely not the right choice.
This is only a quick way to do some home garden works quickly and clean. If you want to cut the largest tree on earth, this is by no means the most suitable accessory. 😂
