Brilliant. Thank you. Just checking... At 1:43, you said that Bose support said that you would 'need to run a cable from the line out to the line OUT on an additional speaker'. Do you mean the Aux IN on the additional speaker (channel 3)?
This is a nice hack. I wonder if anyone has measured the latency over their proprietary wireless link? I'm sure it's pretty low, but with this configuration now you've got wireless delay N to speaker A and 2N wireless delay to speaker B. My preferred setup with two of these is a mixer with two of the wireless transmitters connected to its output.
@@richardvonlehe4581 mixer is definitely the better way to go. This way is just simplified. I see this method for people who are simple street performer or maybe someone giving a speech to a small group of people.
great, thanks, put like and subscribed. Actually you should also add that you can do this without the Bose transmitter, but with whatever transmitter, cheaper one works with no problem. thank you!
Brilliant. There are a lot of things with my L1Pro32 I figured out as well that I have shared with others that Bose seemed to have trouble communicating. . With the L1Pro32 what lacks for such a beautiful PA is it's only mono and I am a reverb or spacial snob. Studio owner for 30 years . I am spoiled. I bought an S1Pro just now for solo acoustic close up and if it sounds great I may get a second to have true stereo for verb, delay etc. I use a small Soundcraft mixer with Lexicon verb. If I want wireless I just put the mixer IO through the insert cable send receive mode no different than a pair of pedals, in and out and I will maintain wireless on the guitar and mic and have stereo!
Thanks for the video, i called bose a week ago asking exactly the same question and received exactly the same answer that you mentioned, they said you need to use a cable in order for both speakers work with one microphone, it would be great if you would demonstrate for the audience :)) cheers pal
When I made the film originally I thought about showing some example audio, but was concerned with showcasing music and getting a copyright hit, but you really don’t get any sense of quality or anything really outside of hearing noise coming out of both. My only additional suggestion that I can’t emphasize enough is to not put the speakers too close to each other for obvious reasons. I put the speakers as close as 15ft together and had no audio issues and as far apart as my backyard pool which is easily 70ft apart and also had zero audio issues. Thanks for the comment
I tried this when I first bought mine hoping it would work, but the signal to the second speaker seemed so hot…didn’t seem like you could even adjust the volume to the second speaker. Did you experience this as well?
Important question and the answer is yes! You must plug the wireless transmitters first into the speaker itself to pair it. Once it’s been plugged into the speaker itself, then it becomes paired. You have to remove that rubber-plastic cap shaped like one and plug it into that port hole to pair. Hope this helps.
Hallo…its really nice video of you…i have some questions, is that means you can’t use other Chanel for mic & instruments on the other Bose? Of course after we connected wireless to another🙏🏼 We have two Bose S1 pro+ and with 4 Chanel for mic and instruments together…but is everything works after we connected them wirelessly??? Thank you very much🙏🏼
@@g.tamilselvan4030 But problem still remains open I believe, when we connect Wireless microphone to Speaker-B, the output only from Speaker-B but not speaker-A, because we are routing Speaker-A line out to Speaker-B, but not the other way around! So we need to share line out for both Speaker-A and B to each other to get All for 4 microphone output on both speaker. Is this understanding right ?
Hello - Thanks for the info. Will this work for simply getting the speaker A channel 3 bluetooth connection to send music only to Speaker B? Was curious if this would recreate the former party mode. I only use this speaker for music or a TV sound extension in a outdoor setting. I would live to have two playing at the same time. The speakers would only be about 15' apart.
@@markbriggs3715 so your doing everything but the mic part. Pair to speaker A. Speaker B has a paired transmitter that you then plug into the out of speaker A at the bottom. Speaker B plays everything playing from speaker A that you pair your phone to speaker A. This is if you want to bypass the app. The app itself has a way to connect to speaker A and then connect to speaker B for just playing music where you don’t need the transmitter. The only problem with it is you need to go into the app every time and are required to link those 2 speakers together each time. Doing it the wireless transmitter route sort of negates that. So in the end you have two options. Hope this helps
I want to use one vocal mic and two percussion mics (left and right). If I use the transmitter on the vocal mic and XLRs on both percussion mics (and XLR to connect the S1 pros) will that work? Will I get a L and R coming out of both speakers?
No this is a mono setup. This speaker really wasn’t designed for a multi-speaker stereo setup unless you use a mixer and once you go that route your talking wiring. What I did in this video is a mono setup that allows fully wireless experience with a simple setup that theoretically can be done to daisy chain multiple S1 Pro+’s together. Hope this clarifies things .
Have you noticed any static or noise due to this? The second speaker that is receiving the signal from the first has much distortion or interference when I do this
But problem still remains open I believe, when we connect Wireless microphone to Speaker-B, the output only from Speaker-B but not speaker-A, because we are routing Speaker-A line out to Speaker-B, but not the other way around! So we need to share line out for both Speaker-A and B to each other to get All for 4 microphone output on both speaker. Is this understanding right ? @california Phantom 👍🙏🙂
@@CaliforniaPhantom 4 microphone meaning, XLR input already available in speakers. 2 XLR in each speaker. Without the mixer I am already using it. I have bought XLR UHF receiver / transmitter in both speakers I.e. mix our from each is transferred to other. This way I am able to hear mic output in both speaker 😅
Is it still possible for it to work, if I am using one shure wireless mic meaning one xlr output in use, because if I use a mic with an xlr reciever I'm using the same set up. I have just started when possible to use one Bose Pro plus for small Venues and want to use two for more coverage ? Your comments would be greatly appreciated.
@@marcburns9063 for small venue 30-40 members gathering one speaker is more than enough, and you can connect 2 microphones.. what I did is, purchased Karaoke 🎤 2 mic with one Line in input.. in total I get 4 mic to work with one speaker 🔈
I guess... You'll have a DELAY between the TWO S1's ( Clearly because Signal has to walk an additional way to the second Speaker ) Maybe.. does not really matter if Speakers point in differnt directions .... Hm...
If a wired solution is your preferred method, then absolutely go with that. This instructional video was not made to counter that. MANY people complained about not having a true wireless solution for this speaker system using multiple speakers. The process in this video creates a truly wireless solution. That was my intention.
@@wollviehsmusik I’m glad it helped. That was definitely the point. People hoping for a full wireless solution for these speakers 🔊 and this is definitely one. I appreciate your comment
So if you already have 2 bose wireless transmitters for a mic and a guitar for speaker A..... Can you still use a third wirelesss transmitter from Speaker B and plug into Spaker A line out port and will everything still work?
In theory as long as you keep adding a wireless transmitter to the output of each next speaker you should be able to daisy chain an unlimited amount of speakers. Now if you use both port A and Port B for mics and guitar then you won’t be able to use a transmitter for the output on the next speaker. If that doesn’t make sense let me know and maybe I can email a diagram.
@@CaliforniaPhantom yea my Daughter does busking and uses two wireless transmitters (one for guitar and one for Mic). But I want to buy her a second S1 Pro Plus for bigger venues. So just wondering what you are demonstrating would still work. I know we have the line out cable we can do but wireless would be a lot less hassle.
@@danielcaballerojr if you have 2 speakers and 3 transmitters: 1 for mic 🎤, 1 for guitar and one to connect the speakers together, it will absolutely work - and work completely wirelessly. That much I can confirm.
Good to know another alternative in connecting the two speakers wirelessly. But I would rather use the App instead. Why use another transmitter to connect the two when you can use the App? If you have extra tranmeter, maybe. But still, It doen't make sense to me.
If you use the app the mic when plugged In will only work on 1 speaker. This option allows 2 speaker system - fully wirelessly which is a common solution that people have asked me.
Yeah as far as I know the app is only to pair over bluetooth. Also bluetooth latency makes it impossibile to use for live performances due to latency issues. There are only a few devices on the market with less than 40ms latency and both the transmitter and receiver need to have compatible codecs. Most bluetooth connections sit around 150-500ms which is up to half a second and when paired with other hard wired speakers, the sound would be horrendous. These live performance devices communicate lower frequency radio waves making the latency near zero. Correct me if I'm wrong but using the XLR out of a mixer only allows connection to one speaker. The vast majority of mixers, microphones, and instruments don't have Bluetooth and even if they did it wouldn't work for live performances. You might get away with it using only these speakers but not if they're paired with other speakers or a house system using XLR, 1/4, 3.5mm, Speakon, etc. Guess I'll have to buy an additional XLR transmitter.
@@timothyreed7241 I couldn’t agree more. They should have allowed multiple signal and share multiple signal / speaker wirelessly. I haven’t tested specifically latency, but I did pair phone w/mic and had output on both speakers rather seamlessly. This setup is best for one man band type situations, whereby you play an instrument and a mic and you got phone connected or maybe your doing standup or conference/auditorium style setup. If your a full band and want a diverse setup, this definitely ain’t the best setup for that.
