Тёмный

Bosny Painted - SD EX-Standard Gundam RX-78-2 

Hyper Weapon Hobby
Подписаться 3,2 тыс.
Просмотров 14 тыс.
50% 1

Bosny Painted - SD EX-Standard Gundam RX-78-2
Took me quite a while but in this video, it's my first time showing how I paint my Gunpla Kits using BOSNY Spray Cans.
Typically, most SD's are easy builds, they are design for the younger age but man oh man. When we talk about SD Ex-Standards, then expect your standard to be low as possible. The only way that you can make them looked any decent is either slap them with all the color correction stickers included within the kit or... yes... paint them.
Bosny Spray paints are not designed for model kits. They are usually used for cars, motorcycles and bike. Your typical industrial paint in a rattle can. But due to their easily obtainable features (than hobby grade paints), not to mention they are cheap as heck. A Gundam Paint type marker is more expensive than a single can of Bosny Painy (400 cc/ml).
Anyways, hoped you liked the video. For any suggestions and feedback, please let me know through the comment section below

Развлечения

Опубликовано:

 

9 янв 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 69   
@NicolasMontreal
@NicolasMontreal 8 месяцев назад
During the process I wasnt sure of the result, but the ending is awesome. Bravo !
@HyperWeaponHobby
@HyperWeaponHobby 8 месяцев назад
I wasn't sure what it would look like either when I was doing this but entrusted everything else to the magic of topcoat 😅.
@earlovl5793
@earlovl5793 Год назад
This is so awesome. Honestly that final product is kinda inspiring.
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Thank you so much ☺️☺️☺️. Your feedback is very much appreciated
@intemptesta
@intemptesta Год назад
That's a clever use of Real Touch Marker. What you did look very close to pre-shade airbrushing technique, but a lot easier! Cool build, a great example for beginners!
@HyperWeaponHobby
@HyperWeaponHobby Год назад
First of all, thank you very much. ☺️☺️. Your feedback is very much appreciative. Due to the limitation of using spray cans, not to mention its industrial spray paints, doing the preshade is almost next to impossible unless i really use an airbrush. I am not familiar yet in using an airbrush so i have to improvised with a Gundam Real toucher to give the kit a shading effect ☺️☺️☺️
@keonguyen9713
@keonguyen9713 3 дня назад
Oh so good
@user-rc3cf3vp9y
@user-rc3cf3vp9y Год назад
😮 really nice technic with the bosny sprays....
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Thank you ao much. Sadly, i dont know how to use an airbrush so spray can such as bosny is the main thing i can for painting gundam kits
@MrYoh-jk3qj
@MrYoh-jk3qj Год назад
Nasty and Clean build! And from rattle cans! This is doable! Great job! If only SD kits aren't hollow.
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Thanks Mr. yoh but Hey! They got to maximize their profits? More hollow parts means less raw materials to consume thus, low production cost and high profit margin. They sell it at around P400 to P500 retail price point now. I could buy 2 hg bootlegs with that price 😂😂😂 but hey. Gotta support Bandai from time to time
@gunmetaljoe_builds
@gunmetaljoe_builds Год назад
Awesome video animation style painting. The crappy looking SD is now looking very detailed with the added paint job and panel lines. Ahh so many materials for the channel. So little time.
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Thanks Sir Joe. SD kits particularly the SDEX Standard lines are one of the easiest SD kits to build but giving them their appropriate details without relying on sticker sheet is another story 😂😂😂. If we could only do this full time, imagine the content we could put up. I was only able to do this kind of content at the expense of my x-mas vacation 😂😂😂. No more long holiday until the holy week.
@FatDaddyHobby
@FatDaddyHobby Год назад
Beautiful output
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Thank you very much 🥰
@mob1_
@mob1_ Год назад
Best SD so far imo🔥 Btw I'm in the process of putting the decals on my 00 raiser now🥴 a bit slow with the fact that i have stuff to do, but I'll manage
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Thanks. That's great for the 00 raiser if you could improve it with the applications of decals. Hoped you can upload it when your done
@sainturiel7459
@sainturiel7459 Год назад
This is more detailed than all of my babies combined lol.
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Thank you so much. It's really to paint these sd ex standards due to their lack of color separations
@myanimeroom9350
@myanimeroom9350 19 дней назад
Awesome.
@anderson9244MLG
@anderson9244MLG Год назад
Makes me wanna custom paint my bootleg HG infinite justice
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Custom paint job to the infinite justice. That would be great. Hopefully they release a revive version of it. They already release the Revive Destiny. Time for the Revive Infinite Justice
@anderson9244MLG
@anderson9244MLG Год назад
@@HyperWeaponHobby yeah, I agree,daban is doing great copying those HGCE
@yosephmanuel94
@yosephmanuel94 3 месяца назад
nice one
@petersamson500
@petersamson500 3 месяца назад
Hi, nice work! May I know what Gundam Real Touch Marker did you used?
@datpaul2259
@datpaul2259 Год назад
looks amazing man!! did a great job! for the shading did u use GM402 Real Touch Grey 2 or the GM401 Real Touch Grey 1? or both? keep on making video's they are great!
@HyperWeaponHobby
@HyperWeaponHobby Год назад
I used only the GM401 and a bit of the GM407. Shading with markers is somewhat unique and It really takes getting used to when using these markers 😂😂. Anyways, thank very much for kind feedback ☺️☺️☺️. Comments like these is the reason why i keep making and making more content. Thank you so much
@FarmashealthYT
@FarmashealthYT Месяц назад
hello can i ask the decal you using from what type model ? sorry I'm beginner gunpla 😁
@sc-2157
@sc-2157 Год назад
Boss, yung primer mo na flat white yun din ba gamit mo sa white parts?
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Yes, yun din ang gamit ko sa white parts. Kaso di ko na pininturahan ung mga white parts, hanggang white primer lang at okay na din nman ☺️☺️☺️
@Verum_X
@Verum_X Год назад
sa pag gamit ng realtouch marker pinapatuyo mo ba muna bago mag clean up or clean up agad pagkapahid ng marker?
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Depende sa surface sir. Dito sa video ung surface ay napinturahan na ng flat white. Mabilis matuyo ang real touch marker sa flat surface kumpara sa glossy o sa bare plastoc lang kaya, nililinis ko agad at mahirap yang linisin sa flat coated surface
@kevinprayco8573
@kevinprayco8573 11 месяцев назад
Did you use sand paper before applying the primer sir?
@HyperWeaponHobby
@HyperWeaponHobby 11 месяцев назад
Yes I did. I did progressive sanding. Its a boring part of pre painting thats why I have not shown it in the video but i used sanding paper of 800 grit, 1200 grit and 2000 grit in that order. I buy my sandpaper at the hardware store. A single sheet is cheap and I cut them to multiplr strips.
@ianmontero27
@ianmontero27 11 месяцев назад
Sir hindi po ba nag ka reactions nung nilagyan niyo po ng bosny flat clear ang gundam markers po?
@HyperWeaponHobby
@HyperWeaponHobby 11 месяцев назад
Hindi nmang nagkareaction. Usually okay lang black and grey, pero pag ung brown na marker, may chance na mag smudge pag tinaopcoat kaya dapat Ang panel line at sa painted plastic ginagawa
@ianmontero27
@ianmontero27 11 месяцев назад
@@HyperWeaponHobby pwede po ba kahit yung sa mata lang ng gundam ang gagamitan ko ng markers po?
@HyperWeaponHobby
@HyperWeaponHobby 11 месяцев назад
@ianmontero1417 malaki ang mata ng SDEX kaya paint ang ginamit ko pero pede nman din gamitan ng Gundam Paint Markers
@jom_and_terry
@jom_and_terry Год назад
What is the difference between bosny and hobby spray paints like tamiya?
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Bosny is industrial paint. It is mainly used for painting cars, motorcycle bikes etc. The chemical composition of bosny is thicker and much harder to remove compared with hobby grade paints. That is why its very tricky to use on Gunplas. But since bosny are mainstream product, theyre much cheaper than hobby grade paints. Of course, investing on airbrush and hobby grade paint are more economical in the long run than let say buy tons of bosny spray cans
@kennethjulia8581
@kennethjulia8581 Год назад
Kala ko foreign ka boss haha. Nice, try ko din magpractice using bosny spray paint. Question for a newbie, medyo naconfuse lang ako ng onti, primer white lang po ba yung ginamit mo para sa white parts? Tsaka yung dark gray na base paint bat ganun as is padin yung yellow part pati blue? Or di mo po sila ginamitan ng base paint?
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Haha, oo sir Pinoy din ako. White primer lang ang ginamit ko sa lahat pero pag iba ang kulay nung plastic, maaring magiba pa rin ang kulay ng base paint. Mas vibrant ang yellow sa white plastic na ginamitan ko ng white primer kesa sa blue plastic na ginamitan ko ng white primer at base paint na yellow. Maraming factors na mangyayari sa result ng paint base sa kulay ng plastic, primer base paint at topcoat. Ang red plastic ang mahirap gawing white
@kennethjulia8581
@kennethjulia8581 Год назад
@@HyperWeaponHobby pag after ba ng base paint boss, katulad nung dark gray mo boss, pag pinatungan ba yon ng yellow paint, magdadark ba siya?
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Kelangan white o kahit anong light ang primer ng yellow. Mahirap gamitin ang yellow sa dark na primer or surfaces at bukod sa magdadark ito, maraming coat pa ang kelangan na spray
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Sa yellow na paint lang ako mejo nahihirapan gamitin di gaya ng ibang color ☺️. Kaya laging white primer ang ginagamit ko pag yellow ang base
@kennethjulia8581
@kennethjulia8581 Год назад
@@HyperWeaponHobby Enlightened! Salamat boss! 😁
@Matt-ll8pc
@Matt-ll8pc 8 месяцев назад
Question po since planning to paint 1 kit by December using bosny. Do we thin the paint or just primer and then thin? Napansin ko rin po gumamit kau nung white fluorescent spray. Primer po ba un.
@HyperWeaponHobby
@HyperWeaponHobby 8 месяцев назад
Thats good, maganda ang holiday season to paint our gunpla kits. Unfortunately, we cannot thin out bosny paint if youre planning to paint it directly from the spray can, unless you decant the paint, mix it with some thinner and use an airbrush. The white fluorescent paint is my primer for the colored parts and served as the based coat for the white parts as well, well its a 2 in one process 😅
@Matt-ll8pc
@Matt-ll8pc 8 месяцев назад
@@HyperWeaponHobby this question bugs me a lot boss. Does bosny topcoat keeps the panel line ink? Like markers and specially tamiya panel liners?
@HyperWeaponHobby
@HyperWeaponHobby 8 месяцев назад
Yes, a bosny topcoat, or most topcoats in general, preserves all the details on your model kit before application such as paint, panel lines, weathering, decals, etc. it acts as protective coating that seals and safeguard these details. Therefore, its crucial to finalized all the details before applying the topcoat as removing it can be challenging. Additionally, whether you choose a flat or gloss topcoat, it will inevitably alter the surface apperance of your kit. One will result in a highly reflective shiny finish while the other will eliminate any reflective features
@davidlopez879
@davidlopez879 11 месяцев назад
I'm subbing for sure. Thanks for showing how to do affordable an practical building. I'm after bosny paints now after seeing your vid. I have a question. How did you cleanup excess paint on edges after masking?
@HyperWeaponHobby
@HyperWeaponHobby 11 месяцев назад
Thank you so much for subbing, thay means a lot to me. Regaeding the removing of excess paint. Well thats kinda tricky for bosny. For hobby grade paint, iused their respective thinner, acrylic or enamel thinerrs and wipe it using a qtips. For bosny paint, now this one is hard and the only way I could remove excess paint is by carefully scraping it off with a sharp honny knife. You actually need lots of experience and skills to do this while nkt damaging the painted parts
@apurazedrickmilesc.5414
@apurazedrickmilesc.5414 Год назад
It is good if you use bosny spray can to gunpla kit?
@HyperWeaponHobby
@HyperWeaponHobby Год назад
I would suggest you used actual hobby grade paints eirher handoainting or for airbrush. But for those in a budget, bosny spray paint willl so since its cheap and can easily be acquired
@apurazedrickmilesc.5414
@apurazedrickmilesc.5414 Год назад
@@HyperWeaponHobby bosny candy tone is good or normal bosny spray paint ?
@HyperWeaponHobby
@HyperWeaponHobby Год назад
It depends on your preference. Biany candy tone paint wilk give you a nice metallic sheen and glimerring effect when used right while normal bosny paints can improve the overall bare plastic colors. I used most of the time normal bosny paint while adding a few touch of the candy tone effects
@apurazedrickmilesc.5414
@apurazedrickmilesc.5414 Год назад
@@HyperWeaponHobby It can direct spray the candy tone to the plastic part ?
@HyperWeaponHobby
@HyperWeaponHobby Год назад
You have to spray it first with some aluminum silver, silver, chrome or any metallic paint as your base coat. And then you apply the candy tone. Candy tone paints are basically just transparent colored paint. So your based coat is really important before using it. That's how most people used metallic colored finished
@oliy8467
@oliy8467 Год назад
"Promo sm"
@HyperWeaponHobby
@HyperWeaponHobby Год назад
Promo what now?
Далее
SD EX Sazabi Hand Brush Painting
12:44
Просмотров 15 тыс.
ПОДВОДНЫЙ ГЕЙМИНГ #shorts
00:22
Просмотров 1,4 млн
Угадай МОБА 1 🥵 | WICSUR #shorts
01:00
Просмотров 614 тыс.
How to Remove Nub Stress Marks on Gunpla
1:57
Просмотров 146 тыс.
ЧУТЬ НЕ УТОНУЛ #shorts
0:27
Просмотров 9 млн