Awesome thank you this helped a ton!! I just got a Boss Katana Air from my family for my 50th birthday, and I was looking at your Jimi Hendrix Katana Tone, so I had to start here. Again, thank you!
Dear Studio Rats, If only your great videos / information was available in 1986 when I started playing guitar it would have flattened my learning curve considerably. I am OG now but have still learned so much from you. Cheers to you, -Bryan
Great lesson really helped. One tip, use the delay2 in tone studio (the one that is combined with the reverb) and you'll be able to save your actual delay button for other delay type stuff.
Thanks Paul. A very useful setting, I slightly tweaked it to suit my Les Paul and it is really versatile, as you said. Excellent demonstration and tuition as always. Your help to us newbie Katana users is invaluable and your time and expertise given, is very much appreciated. Come on people..... buy this guy a coffee!
Bigger Dagger (your autocorrect name 🙂) what tweaks did you make for your Les Paul? I do love these videos as I'm not very good at this stuff but it always sounds different through my humbuckers.
Paul, you’re such a good guitarist, love your videos and your sound. I’m in the market for an amp and now I’m leaning heavily toward the Katana. Thanks.
I’ve got both mark 1 and 2 100w for stereo link. Killer deals on Mark 1 bit the effects in mk2 are in another tier. Just unbelievable, plus it takes pedals though it doesn’t really need anything other than maybe adding a looper. Unless you use the USB interface into Logic Pro X.
I had previously been underwhelmed by the sounds I was getting out of my katana... It turns out that I just had no idea what I was doing ;D thanks for the tutorial, helped me out a lot
After owning the Boss Katana Artist for soon 2 years, I only now realized you could go deeper into the settings with Tone Studio - I haven't seen the NOISE SUPPRESSOR before! My Ibanez and I thanks you, No more whitenoise \m/
This was extremely helpful, the tone studio is a little intimidating when you're new to it. I just dialed in a great tone for Link Ray's Rumble with ease. Before I was having a hard time trying to get that "dry" but a little "wet" with some dirt on it sound he has on the original recording. This should help me greatly with building Surf Rock tones as well as I get to heavy handed with the distortion. Thanks!
This will definitely get me to the destination tone even though I have no idea what all of those settings mean. Learning that part is all on me. Thanks for the setup
Finally hooked my Katana up to tone studio today and been dialing in your patches, the tones I'm getting on my telecaster are amazing. The biggest plus of tone studio for me is the noise gate. I nearly sold my katana because of the horrific noise it would make at high gain but with the noise gate on and your patches i now love this amp and would never sell it. Thank you so much for all your brilliant videos. I will be dialing this patch in tomorrow as my neighbours have had enough for today!!
Probably the best tutorial that you have done to date. I am deffo going to dial this one in and use it as a starting point. Big thank you for explain the NS.
Thank you very much Paul. The way explain and show the entire process is crystal clear.You took your time to be steady at the same time.Once again this is great!
Thanks Paul, I finally got round to plugging on to tone studio today and setting this up with my mk2 50 kat and tele. Love the tone and with my airstep kat I can bring the booster and fx in and out with no hassle! Awesome work sir
Thanks for the rig, real amplike and sounds great with my SG , all 3 pickup positions too … 😎👍 I’m using the MK II head with an EVH 2x12 , stock Celestion anniversary speakers
Just set down with this video and my Katana. 😮😲! Tweaked it just a hAir for personal preference but this patch sounds GLORIOUS !!! Definitely gonna order the 8 pack you’re offering on your website:)
Just tried this tone out. VERY good. I may try swapping the OD for a fuzz but so far loving it. With 2 expression pedals hooked up to the mk2 head as well with one for volume and the other controlling gain you can do a lot with this.
You have Boss's recommendation about the Volume and Master Volume knob backwards... They rec having the VOLUME knob all the way up to 10 and using the master to adjust the actual volume in real time so the pre amp that the volume knob controls as the pre amp adds a lot of amp character not the master knob.
The only things I wish Boss had done was made a way you could scroll through the 3 different colored settings on the efx etc... via a foot switch and also be able to work the gain in the amps via an expression pedal... If they had those two things this rig would be a weekend warriors dream :)
I have one 100w Boss katana, 2 , 6.5w Boss katana mini amps to busk out and one 300w Boss katana bass amp. I love these amps ..the clear tone and access of the programs of effects are endless.....i can bring my 100w Boss katana and can switch it down to 50 watts without the problem of carrying heavy amp with no control of volume After having fender amps fading out sounding like your walking on loose gravel..and a Marshall jcm 800 full stack farting from your distortion petal seems too much to handle gig to gig . With my Boss katana I don't need to carry any effect petals and dial in the HM1 petal with my Delay without an issue
The Mk I has some important limitations, i can´t get booster and mod at the same time. I tried using the Fx to set the comp but it muffles the sound. Still, getting some great tones from similar settings. Thanks a lot!
How would I be able to set the compressor light to either a button in the gfac or keep it on permanently. Love the settings and really appreciate all the effort on posting it.
Hey Paul! First off let me say that I love your videos, and it seems like you're getting some great tones out of the Katana. I do, however, have some confusion with this one. At 2:40, you demonstrate what you say is a "clean" tone, yet the tone is clearly distorted. You're showing the settings panel with no Booster engaged, on the Clean channel, and even with the gain set at 66 it should be truly clean. Later on as you build the patch, around 6:04, you toggle the Boost, to reveal a much cleaner sound, which is what I would have expected to hear at 2:40. Was there something going on in the recording where the Boost was initially engaged even though it was not reflected by the panel settings you were showing?
icetrey47 hi. To me my clean tone is never truly clean, I’m using dynamics on playing to make it either very slightly driven to lightening up my playing to get it very clean. I hope that helps.
Hi Paul, great tone on my 50Mk2 and Vintage SG. In the video you mention preferring the Mod Before the Booster in the chain, but it was not available, when I looked into this, it was available. Is this part of the recent update? It made a big difference to the tone. Thanks again
Thanks for this tutorial Paul. If I am understanding it correctly, you're kind of creating a "2 channel amp" in one patch. Without booster is the clean, with booster is the rhythm/lead. Adding the solo could technically be the lead?
Hi, just found your site, good stuff. Im buying a Katana Mk2 head next week, but i'd like to know how to plug the Katana and using my new JC120. Can i hyjack the JC and feed it with the Katana???......thank you in advance.
I opted for the Katana Artist MKII after spending 3 weeks with a Fender Mustang GTX100. Happy that I made the exchange and very thankful to you guys for the instructive videos (and the patches that I "invested" in - they're great). Will you consider some Artist-developed patches to tweak for the Waza Craft Greenback speaker? Just curious.
Hi Paul, when you use this tone with the booster and other effects, how well does your guitar clean up when you back off the volume?? I have noticed that my Gibson Les Paul does not clean up very well when i use tones in the Katana made up from the Crunch, Lead or Brown amp models. However, if i use a clean model with a touch of reverb and by Friedman BE-OD in front of the amp my Les Paul cleans up beautifully with the volume. Would love your thoughts??
4:45 this is why I brought the 100 2x12 (mk1). It is awesome. Still furious at Boss for not putting a speaker out on the mk2. I6:36 still don't under stand why Boss made it so you can't move the chain around. Now you have to buy the missing pedals in your pedal chain to get your tone, drives me nuts.
I'm a bit late to this but now a proud owner of a 100 mk2 and an Epi LP 1959 standard. Learnt a great deal from this katana series. Could you do one more to dial in Gibson PAF tone? Is it possible to get close with a Katana and Epi? Thanks.
Hello Paul. Great videos always. I have the Katana 100 MK 1 and in the Librarian app that I use, you can move the order of the effects in the chain or create a custom one. Just wondered if you tried that. Thanks again.
How do i use booster and comp at the same time? I couldn't find a way of turning on compression without the booster going off. Great tutorial btw. Even without compression it gave great results
I have the same issue, think it's because I have a MK1 where Booster and Mod are on the same dial so it's an either/or situation but can be and on the MK2. Is yours a MK1?
hi there I have a katana 100 mk 1 when i enter all the settings you give my tone doesnt sound anywhere near as nice as yours, im using a player series strat, any idea why this is might be? thanks for all your videos 😊
I’ve put this on my katana 50 and sounds great thanks. I have more insight into this amp from you then anywhere else. I have boss gt1 and and wondered if I put it in the pre amp slot behind, would the katana eq ( as in frequency cuts) still be active ?
Sounds great in the video- but when I do exactly the same on my 100 Mkii it doesn't sound anywhere near as good- sounds muffled and dead compared. I wonder why?
Paul, just saw a couple of your Katana vids and you mentioned you might have some of these patches available. Where might I download them. Great stuff. Thanks
Hey, great work. I was wondering if you are using the simple version or the 2X12'' speaker version of the Boss Katana 100 Watt MKII amp. I want to buy one, but I'm not sure if the extra cost and dimensions of the latter are worth.
I don't think 100W 212 MK2 supports stereo sound. Both speakers play the same thing. It's a shame tho because it totally could do it, but it would make Roland Jazz Chorus series almost obsolete... Cheeky suits...