No video :(

Bow Mount Trolling Motor on Hobie Pro Angler 14 - Kayak Fishing Supplies Walkthrough

Jake Through The Lens

Подписаться 525

Просмотров 37 тыс.

50% 1

Видео Поделиться Скачать Добавить в

Detailed walkthrough of my Hobie Pro Angler 14 360 with a bow mount trolling motor. The motor I went with is a MotorGuide Xi3 Kayak Trolling Motor with 55 lbs thrust, a 36 inch shaft, and GPS Spotlock. The trolling motor is mounted to the kayak using the One Objective Bass Fishing mount.
The rigging was all done through www.kayakfishi...
If you are interested in adding a trolling motor to your kayak or doing any custom rigging hit them up at their site or give them a call at (619) 866 - 6129.
Full details of my setup:
Hobie Pro Angler 14 with 360 Drive
MotorGuide Xi3 Kayak Trolling Motor with GPS Pinpoint
100ah Lithium Battery
Lowrence HDS7 Live
YakAttack through hull wiring kit
Anderson plugs
Custom stow & deploy rigging
Follow me on Instagram for more fishing & custom rigging content: bit.ly/36nhoZ5

Опубликовано:

26 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 101

@MrPalopico 3 года назад

Nice trolling motor, I’m running a 5.7 hemi on my kayak

@jakethroughthelens2512 3 года назад

That’s it? 🤣

@Jumbomaxgrips 2 года назад

It would be super-helpful to provide a link to the parts, like the thru-hull fittings or the part you used to allow the cord connected to the trolling motor to swivel... or at least what they are called. Having a hard time tracking them down.

@aarontomiyama9747 Год назад

What size eye screw is that for the live-scope bracket? Also, what kit did you use for the mod of the release pedal line, inserts, knobs?

@CurrentJAM 2 года назад

Finally tested this out. Kayak Fishing supplies did a great job. Thanks again for the recommendation.

@etownoutdoors5052 2 года назад

Do you remove the trolling motor during transport or is it sturdy enough to leave it on without damaging the kayak?

@carlbartkaw1398 3 года назад

Nice setup ,where can I buy clamp for raising the motor

@BassThumbsFishing 3 года назад

Man this came out great! Sweet rig bro so stoked I got be apart of this process! 👊🏻

@jakethroughthelens2512 3 года назад

Thanks man, appreciate it 🙌

@CurrentJAM 3 года назад

Placed an order with KFS, thanks for sharing the build.

@jakethroughthelens2512 3 года назад

Awesome, you’ll love it!

@basscatlildave 3 года назад

That’s a Nice pulley set up for deploying the motor.

@jakethroughthelens2512 3 года назад

Yup works great! Thanks for watching

@jashof1 2 года назад

I stuck an Xi3 on the Bow of my Predator PDL last year. I am now addicted to that TM. However, mounting all that weight on the bow really affected the kayak's handling in adverse conditions. I am curious how the PA handles all that bow weight. Have you noticed changes in how it handles since the install?

@YakNZakFishing 3 года назад

Nice job brotha! Clean install. Now I know who to go to when I get my motorguide.

@jakethroughthelens2512 3 года назад

Yessir! Let me know when you’re ready

@joshuahawks894 2 года назад

where did you get the clamp that was attached to the shaft of the trolling motor.

@jimdillard2180 2 года назад

following this question also

@newqlar 3 года назад

Sick setup :) Tight lines brother.

@bigbassking9510 10 месяцев назад

Wow sweet rig how’s the 360 drive still a lot of problems what’s your experience

@saounyang 3 года назад

Hopefully there is a DIY with parts, instructions and tutorials of how to make the trolling motor pulley release and cables like how yours is set up

@jakethroughthelens2512 3 года назад

Good point, I’ll see what I can do!

@stuarts765 3 года назад

ever make video?

@robertedmonds776 5 месяцев назад

How did you secure Anderson connector bolts or just screws

@NellysfishingAdventures 2 года назад

Sweet set up man

@stuarts765 3 года назад

Can you show how the cable is ran through the hull for the cord that locks and unlocks the pedal on the Xi3 please. Sick set up. I have pretty much same setup. Just trying to figure out how I can get my cable ran right.

@ronniecaldwell5944 2 года назад

Did you ever figure it out I’m looking to do the same

@stuarts765 2 года назад

@@ronniecaldwell5944 yeah buddy I sure did. I can't add pictures on here unfortunately

@stuarts765 2 года назад

@@ronniecaldwell5944 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GwlMuEcPsTQ.html&ab_channel=Flukemaster this could help a bit

@kevinsauer5794 2 года назад

How shallow can you go with that trolling motor setup?

@pywifishingandoutdoors 3 года назад

Ehhh! I see you decided to go through with the bow mount motor. Nice setup, im going to need to make my lever and pulley release more efficient and clean like yours.

@jakethroughthelens2512 3 года назад

Yup! Loving it, let me know if you have any questions

@billgo4th 3 года назад

Sweet setup

@jakethroughthelens2512 3 года назад

Appreciate it!

@TheDonniebailey530 3 года назад

Hey do you take on water when your full speed on your trolling motor?

@applegatefishing 2 года назад

I'm running the same setup, as long as the wind is 15 mph or less I'll get a little bit of water at full speed that comes up through my scupper holes. That is the only water I have seen, if you're going full speed into white capping waves you'll definitely get wet. I'll eventually post up some new videos with the setup on my channel as a lot of people have questions about it.

@lisao9677 3 года назад

Sweet setup. Do you leave the trolling motor attached and the battery on your kayak during transport? Also, can you leave your rods in the thru hull rod storage during transport? Thanks for the vid.

@jakethroughthelens2512 3 года назад

Thanks for watching! I don’t leave any of that in my kayak while transporting it. I have kept my rods in the hull storage a couple of times though without issue. Just make sure you strap them in with the little bungy cord. You could probably get away with leaving the battery in as well if you wanted to. I’m just paranoid I guess haha

@davidwright4937 2 года назад

this is a beautiful kayak and how its set up. But what is the part name for the cable coming out of the kayak floor for the trolling motor?

@Banogonoski 3 года назад

Dude this is awesome

@edgars00789 2 года назад

Is the hobie pro angler 14 with a 360 drive is it good in saltwater or is the Old Town 136 autopilot better

@tommyg5346 2 года назад

Nice video. Are you using it in saltwater too? I noticed on their site the saltwater version is coming in 2022. Curious if you are using yours in saltwater anyway and how it is holding up.

@Vue_Mix 2 года назад

Where to get the pieces to pull the lever part?

@juliodelarosa8455 3 года назад

What size wire are you running? And what are your Anderson connectors rated at? All I see is 50amp connectors

@TheDonniebailey530 3 года назад

It's dirrty because I catch fish. Haha love it.

@jakethroughthelens2512 3 года назад

Lol yup 🤣👍

@DerylKowalski 3 года назад

Do you get water in the hull when you run the motor. I had mine out today and had some water in the hull at the end of the day.

@jkgoogle5185 3 года назад

Hello.. What is the price of that set up, as is of July/August 2021?...Regards..

@steveparker7763 3 года назад

Jake, how did they accomplish running the pull cable for the xi3 release lever?

@chads.4272 3 года назад

Thank you for this awesome video! ^_^

@vekcorpestsolutions853 2 года назад

at 3:09 where to get that?

@saounyang 3 года назад

I think I’m gonna sell my PA12 One Objective Bow Mount and get a On The Water bow mount instead due to it being lifted an inch and a half allowing to install a pulley on the mount itself for the motor release instead of drilling. Also it comes with red/green lights already

@r.e.woutdoors9321 3 года назад

Man that is sick, but is there anyway that you can go into more detail on how they did the deployment pull rope system on releasing the motor? (On how they rigged it up and what they used and what mount is used to let the motor down)

@jakethroughthelens2512 3 года назад

Thanks yes I’ll try to do a more in depth video 👍

@steveparker7763 3 года назад

Garmin 0101278401 is on the shaft, and One Objective sells the through hull for the rope to deploy

@MegaClos09 3 года назад

Nice set up! What battery did you decide to go with?

@CurrentJAM 3 года назад

Love it! Can this be used in saltwater?

@jakethroughthelens2512 3 года назад

The kayak yes, the motor is rated for freshwater but they sell saltwater versions 👍

@CurrentJAM 3 года назад

@@jakethroughthelens2512 thanks Jake. I ordered the saltwater version.

@gregellingson7584 3 года назад

Looking sweet!

@jakethroughthelens2512 3 года назад

Thanks Greg!

@GCBassin 3 года назад

Lot of salty comments in here. 🤣 Awesome build man. I'll be doing mine as close to yours as possible. 👍👍

@jakethroughthelens2512 3 года назад

Lol for real. To each their own. You’ll love it 👊

@CrazyCranker 3 года назад

Keep us informed if you have any problems with cracking around that front handle from all that weight.

@jakethroughthelens2512 3 года назад

No issues yet but I will keep you all posted 👍

@mac0300 3 года назад

Sick!

@jakethroughthelens2512 3 года назад

Thank you 🙌

@TheDirksAaron 3 года назад

So on your ketch board you had two tourney tag holders one pouch and one clamped to the board. What is the one clamped to the board?

@jakethroughthelens2512 3 года назад

That one is sold by Ketch, you can find it on their website 👍

@castinwithbuddy5577 2 года назад

How tf do u steer it

@falin4764 3 года назад

What did they use to hook to your pedal to release the trolling motor? What are specific parts?

@steveparker7763 3 года назад

Garmin 0101278401 is on the shaft, and One Objective sells the through hull for the rope to deploy

@johnstanley9494 3 года назад

Do you know what piece they used to attach and hold in place the power pole connector to your boat?

@jakethroughthelens2512 3 года назад

Sorry not sure what you are referring to. I don’t have a power pole

@YakLocal 3 года назад

Slick!

@jakethroughthelens2512 3 года назад

Thanks bro 👊

@chismahu23 3 года назад

Sick set up brother! How fast can that xi3 run your kayak?

@jakethroughthelens2512 3 года назад

Thanks man! It’s pretty quick the fastest I have hit is 5.0 mph. Runs about 4.7 on full power most of the time though

@DerylKowalski 3 года назад

Who makes the free swinging bracket that the pull handle is mounted to?

@jakethroughthelens2512 3 года назад

I believe it is intended to be used for Panoptix, so Garmin.

@haciendadad 3 года назад

Is this a $8K kayak?

@gunchief0811 2 года назад

Subbed...

@TheDonniebailey530 3 года назад

And what are you doing for nav lights?

@jakethroughthelens2512 3 года назад

Nothing currently, need to get that figured out though!

@texas-linemangaming731 3 года назад

Yak power lights are awesome

@bbowen4629 3 года назад

Very nice, who rig this?

@jakethroughthelens2512 3 года назад

Thank you! Kayakfishingsupplies.com rigged it for me. All their contact information is in the description 👍

@benjamingonzalez9398 3 года назад

Daddy’s back👅👀👀

@joeshmo4110 3 года назад

Would you please be able to tell me the name of that pulley mounting plate? Thanks!

@jakethroughthelens2512 3 года назад

Sorry I’m not sure I think it was custom from the shop. Let me see if I can find out from them 👍

@steveparker7763 3 года назад

Garmin 0101278401 is on the shaft, and One Objective sells the through hull for the rope to deploy

@BrianParkerson 3 года назад

@@steveparker7763 Thank you!!!! I've been looking for the right clamp to attach my deploy rope and I think I finally found it... sincere thanks for sharing! 👍

@ronniecaldwell5944 2 года назад

@@BrianParkerson can you share the info with me Brian I’m also looking for it.

@markskibo5159 Год назад

Nice $20000 canoe !!!

@ekie85 3 года назад

What’s the price ??!

@jakethroughthelens2512 3 года назад

The motor with GPS pinpoint is $1,250 I believe. You also have the cost of the battery, whatever mount you choose, and other miscellaneous parts depending on what kayak your have. If you give kayak fishing supplies a call they should be able to get you a price for what you want to do

@saounyang 3 года назад

@@jakethroughthelens2512 BPS/Cabelas has an exclusive 52lb thrust with pinpoint for $999 but You would have to cut the shaft down since it’s 54 inches

@Kesmi85247 2 года назад

Why not buy a small boat? It would be cheaper and roomier

@texasnative 3 года назад

I love $10,000 kayaks 😂

@jakethroughthelens2512 3 года назад

Me too 😍

@starward365 2 года назад

I don’t understand why people buy a kayak and put a motor on it. Kayak paddles, exercise, solitude…all things to consider. Next week I’m buying a glider and putting an engine in it. Oh, wait,… that’s an airplane.

Далее

MotorGuide Xi3 Kayak Motor - Installation Video

7:13

MotorGuide Xi3 Kayak Motor - Installation Video

Просмотров 51 тыс.

Installing an Electric Trolling Motor on your Hobie Kayak

21:02

Installing an Electric Trolling Motor on your Hobie Kayak

Просмотров 31 тыс.

skibidi toilet multiverse 041

06:01

skibidi toilet multiverse 041

Просмотров 5 млн

МЕНЯ НАКАЗАЛИ ЗЛЫЕ РОДИТЕЛИ - SCHOOLBOY RUNAWAY В РЕАЛЬНОЙ ЖИЗНИ!

11:51

МЕНЯ НАКАЗАЛИ ЗЛЫЕ РОДИТЕЛИ - SCHOOLBOY RUNAWAY В РЕАЛЬНОЙ ЖИЗНИ!

Просмотров 242 тыс.

Я ДОСТРОИЛ ЗАВОД - Satisfactory

19:13

Я ДОСТРОИЛ ЗАВОД - Satisfactory

Просмотров 167 тыс.

拉了好大一坨#斗罗大陆#唐三小舞#小丑

00:11

拉了好大一坨#斗罗大陆#唐三小舞#小丑

Просмотров 6 млн

HOW I RIG MY ELECTRONICS ON MY HOBIE PRO ANGLER! Kayak Build Update!

13:06

HOW I RIG MY ELECTRONICS ON MY HOBIE PRO ANGLER! Kayak Build Update!

Просмотров 6 тыс.

Hobie Pro Angler Bow Mount Trolling Motor Build With On Water Demo

15:41

Hobie Pro Angler Bow Mount Trolling Motor Build With On Water Demo

Просмотров 5 тыс.

OneObjective Hobie PA 12 Bow Mount | Motorguide Xi3

15:11

OneObjective Hobie PA 12 Bow Mount | Motorguide Xi3

Просмотров 16 тыс.

NEW KAYAK Fishing Setup For 2021 | Hobie Pro Angler 360

25:41

NEW KAYAK Fishing Setup For 2021 | Hobie Pro Angler 360

Просмотров 82 тыс.

Kayak Bow or Stern Mount

6:46

Kayak Bow or Stern Mount

Просмотров 38 тыс.

Hobie PA-14 360: Maintenance & Adjustments

9:28

Hobie PA-14 360: Maintenance & Adjustments

Просмотров 20 тыс.

How To Kayak Launch La Jolla Shores on Hobie Pro Angler 14

12:56

How To Kayak Launch La Jolla Shores on Hobie Pro Angler 14

Просмотров 14 тыс.

Motorguide Xi3 Kayak Trolling Motor Review: First Hand Experience

9:38

Motorguide Xi3 Kayak Trolling Motor Review: First Hand Experience

Просмотров 26 тыс.

Bass Fishing out of a Hobie PA17

13:05

Bass Fishing out of a Hobie PA17

Просмотров 22 тыс.

Hobie PA 12 Bow Mount Plate Install.

4:51

Hobie PA 12 Bow Mount Plate Install.

Просмотров 7 тыс.

skibidi toilet multiverse 041

06:01

skibidi toilet multiverse 041

Просмотров 5 млн