Bowl Without a Lathe Challenge // Router // Woodworking

Подписаться 809 тыс.

Просмотров 254 тыс.

50% 1

I was asked to take part in a "Bowl Without a Lathe Challenge" so I came up with a few jigs to create a turned bowl look!
Here's the link to all the other No-Lathe Bowl videos - goo.gl/4zi5fQ
Links Below, thanks for watching!
Check out my website for free plans and tutorials - www.3x3custom.com/
TOOLS & MATERIALS USED (affiliate links)
Ruler - amzn.to/2LmKUFa
Big Compass - amzn.to/2NKOwhk
Router - amzn.to/2NJq8MZ
Upcut Spiral Bit - amzn.to/2Ljmsod
Pattern Bit - amzn.to/2JOO7aZ
Benchtop Sander - bit.ly/2mF36LF
Dozuki Saw - amzn.to/2LnFdHr
Collet Extender - amzn.to/2LnIQwU (NOTE: This extender bent while I was using it, I added the link so you know which one NOT to buy...)
Dremel Sanding Discs - amzn.to/2JTJIDJ
Mineral Oil - amzn.to/2LJ06J3
Amazon Store - a.co/fi2Ujji
_____
FOLLOW
Website - www.3x3custom.com/tutorials
Subscribe - www.youtube.com/watch?v=19JLU...
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, clicking on them helps me continue to make more projects :)

Хобби

Опубликовано:

26 июл 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 744

@RagnBoneBrown 6 лет назад

WOW!!!! This is incredible. It looked like a heck of a lot of work but it was so worth it! Very clever techniques. Thank you so much sharing this and for participating in the challenge. 👏👏👏👏

@3x3CustomTamar 6 лет назад

Thanks so much Keith! It was a ton of work! Thanks for including me on this!

@dalejones4186 6 лет назад

Some one needs a sponsor to send her a larger band saw and a lathe. You are truly inspiring. Great job.

@3x3CustomTamar 6 лет назад

That would be awesome. Ha! Thanks so much!!

@emostorm7 3 года назад

I need a sponsor for that too

@mariah4451 6 лет назад

That's the most turned on a lathe 'no lathe' bowl so far. It's gorgeous:-) You are the router jig queen :-)

@3x3CustomTamar 6 лет назад

Thanks so much! I don’t know about that though....

@paulhasser625 6 лет назад

Very creative! Yes, I agree, it looks like it was made on a lathe. I love your persistence and creativity in adapting the tools you have.

@3x3CustomTamar 6 лет назад

Thanks! I don’t know if it’s persistence or craziness. Haha!

@shaunboydmadethis 6 лет назад

Holy smokes, absolutely fantastic! If I ever feel like I can't do something because I don't have the right tools, I am going to watch this.

@3x3CustomTamar 6 лет назад

Thanks so much Shaun! Glad I could help! I hate when people say they can’t make something because they don’t have the right tools!

@GetHandsDirty 6 лет назад

Great ideas in here! It really does seem it was turned on a lathe. Cool!

@3x3CustomTamar 6 лет назад

Thanks so much! It was a fun process to figure out

@3DPrintingNerd 6 лет назад

That seemed like a lot of work to make a bowl, but at the same time, that seemed like ULTRA satisfying work to make a bowl. Well done!

@3x3CustomTamar 6 лет назад

Hahaa! Quite the conundrum! It was both lots of work and super satisfying

@jimmydiresta 6 лет назад

Wow very well done! Some good tips in this process.

@3x3CustomTamar 6 лет назад

Thanks so much Jimmy! Really appreciate that!

@jesdaniels3166 6 лет назад

I felt my brain make another fold. I learned something and went "whoa". Awesome job.

@3x3CustomTamar 6 лет назад

Wow. You just made my day. Thanks for that.

@MattBerryCustom 6 лет назад

Beautiful! Really well thought out construction and I love your creativity with the jigs. Also really admire that you are not afraid to highlight what you see as mistakes, we all make them and if we share them it helps us all to grow. 👍🏻

@3x3CustomTamar 6 лет назад

Thanks so much! This challenge was so fun. I love seeing all the different ways ppl will tackle the same problem

@GregLeBon 4 года назад

Well said Love the resource minded approach!

@RustyCas999 2 года назад

I love how efficient you are with our time - you pack a ton of info into a short amount of time. Thanks for not making it longer than it has to be just so more ads run. It’s why we keep coming back.

@3x3CustomTamar 2 года назад

Awesome to hear

@HomeMadeModern 6 лет назад

this is really great!

@3x3CustomTamar 6 лет назад

Thanks so much Ben!

@KSFWG 6 лет назад

You really dug in deep and "turned" out a great bowl! You're jigs worked fantastically well! Thanks for the video!

@3x3CustomTamar 6 лет назад

Hahaha! Thanks! Jigs are sometimes better than the finished product! 😂

@KSFWG 6 лет назад

Oh, don't get me wrong -- I really, really like the bowl! It turned out great! But I also like how you improvised and came up with a way to create the jigs that you used.

@3x3CustomTamar 6 лет назад

KSFWG thanks so much!

@ravenclanx 6 лет назад

That was very smart and clever what you did with the table saw using the angle like that to shape the bowl.

@3x3CustomTamar 6 лет назад

Thanks! It was a bit scary. But it worked!

@smxaviermelendez9210 2 года назад

I know poplar is not considered a premium species of wood, but the color of that bowl turned out great, in my opinion. And of course, great job doing so much without a lathe!

@3x3CustomTamar 2 года назад

Thanks! Yeah. I’m always on the look out for special poplar pieces like this

@InspireWoodcraft 6 лет назад

Brilliant! I think it “turned” out great!

@3x3CustomTamar 6 лет назад

Hahaha! Love a good pun. Thanks!

@GosforthHandyman 6 лет назад

Lovely work and subscribed! This project was great fun! 👍🛠😀

@3x3CustomTamar 6 лет назад

Awesome! Thanks! I really appreciate that!

@codyjohnle 6 лет назад

the extent of my woodworking is a building of one set of cornhole boards. that's it. but i still, on occasion, watch a woodworking video and fantasize about doing something else. that said, this is def one of the better woodworking videos i've seen. great narration, great editing, great anticipation of audience. couldn't be more pleasant.

@3x3CustomTamar 6 лет назад

Awesome. I really appreciate the feedback!

@vincentferrari 6 лет назад

The beauty of poplar is highly underrated. This turned out great!

@3x3CustomTamar 6 лет назад

Agreed! Thanks!!

@mikery2316 6 лет назад

I love the creative way your brain works, Tamar. It is so fun and so inspiring to watch your videos.

@3x3CustomTamar 6 лет назад

Thanks so much! I really appreciate that!

@TheCankersore Месяц назад

Amazing at many levels - skills, innovation as well as lateral thinking… Brains, beauty and grit make you a very complete person. Brava!!! 💐

@randyrodriguez4643 6 лет назад

Clever as hell! I really like the tablesaw trick for the outside shape. You could even make the outside more of a curve by changing the tilt of the blade each time you move the bowl on the jig.

@3x3CustomTamar 6 лет назад

Thanks! That would have been cool

@mickythreee4640 5 лет назад

You have given me inspiration to make a jig for a curved back of a dining chair. Thank you!

@3x3CustomTamar 5 лет назад

Awesome! That’s what it all about!

@YouCanMakeThisToo 6 лет назад

So cool! Really dig how you approach this.. might mind first went to power carving since a lot of people are messing with the arbortech stuff now. That stuff is cool, but it's way more fun to see a really creative approach like this! Way to stay at it.

@3x3CustomTamar 6 лет назад

Thanks so much Caleb! That’s where my mind went at first also. But I really wanted to try to make it as perfectly round inside as possible. I’ll def have to try that arbortech stuff some time though!

@silvergrizzly316 6 лет назад

WOW Tamar!!! That is PERFECT, you are very creative!! EXCELLENT job.~ Jay. 👍👍

@3x3CustomTamar 6 лет назад

Thanks so much jay! I really appreciate that!!

@Whiteboyinc- 6 лет назад

Thats a really cool way of doing that.You really think outside the box and get stuff done with the tools you have to work with,Thanks for sharing :)

@3x3CustomTamar 6 лет назад

Thanks! I appreciate that!

@DMZ739 6 лет назад

Watching the work being done and the choice of tools might give the impression you do not know what you're doing, but in reality this is the work of an inspired, creative and talented artist who knows her tools. The final simple beautiful bowl do not render justice because ignorantly one might say 'That's easy to do on a lathe!' True. But doing it without a lathe. That's a different story. You're a true artist.

@3x3CustomTamar 6 лет назад

I really appreciate this. I never really considered myself an artist but I always knew I loved to be creative

@larrydaniels6532 5 лет назад

@@3x3CustomTamar That is the way it should be.One considers themself a painter,a sculptor,a pianist,a craftsman.The title of artist is to be bestowed by others onto your work or talent,I agree with DMZ.

@3x3CustomTamar 5 лет назад

Larry Daniels ☺️☺️

@fcatt48 5 лет назад

Just watched every bowl without a lathe video I could find on youtube and your bowl is by far the best.

@3x3CustomTamar 5 лет назад

Ha! Awesome

@edwardcullen606 Год назад

I remember watching this when it first came out, I thought that is an awesome bowl. I just watched it again, "reruns", that is an awesome bowl. I truly love how you over come set backs in your projects, very inspiring. Keep up the wonderful videos,

@LiloUkulele 3 года назад

Morning coffee with Tamar!....Go-Fund-Me for a lath!...this video concept was so helpful...I need to make a curved dish with 15ft radius for glue up of a ukulele back and braces...curved sled for the router & spin the MDF...Love your channel!

@3x3CustomTamar 3 года назад

Haha! Glad it was helpful!

@markbryan9989 6 лет назад

Tremendous effort with great results. I would have been nervous cutting that angle on the table saw too! Great job.

@3x3CustomTamar 6 лет назад

Thanks! Yeh. My husband was watching as I was doing that cut. The look of terror on his face was priceless.

@stephengoh5456 3 года назад

You're amazingly full of great ideas! Love it. Thank you.

@izzyswan 5 лет назад

Great work!

@3x3CustomTamar 5 лет назад

Thanks so much!!

@mrbrianparker 6 лет назад

Very clever stuff. I think we're all going to really know why lathes are a good idea but that was the challenge and you did it with an excellent result.

@3x3CustomTamar 6 лет назад

Thanks! Yeah. I didn’t really know I NEEDED a lathe until after I made this. Ha.

@herenow2895 4 года назад

I recently saw a video where a guy made a bowl on a table saw, using a jig that arced the piece over the top of the blade. He went back and forth until the inside was done and then used a different jig to do the outside. I cant find the video to share with you, but you get the idea. You did a great job. You're very talented.

@3x3CustomTamar 4 года назад

Thanks! I think I saw that!

@claire2430 6 лет назад

Great work. Much better than a segmented bowl. Congratulations.

@3x3CustomTamar 6 лет назад

Thanks so Much! I’m very happy with how it came out

@markmaestas1129 5 лет назад

Impressive work! You show that if you have skill and creativity, you don't have to have every expensive tool in order to get great results.

@3x3CustomTamar 5 лет назад

Thanks! I’m happy you got the point! Ha!

@Heartwing37 5 лет назад

Nailed it! I’m a woman learning woodworking and I’m glad I found your channel!

@3x3CustomTamar 5 лет назад

Awesome. I hope there are going to be more of us!

@gordonburns8731 6 лет назад

An absolutely ingenious process. RagandboneBrown is already on my subscription list, and now so are you. It's lovely to see women with workshop skills... Keep up the good work, ma'am.

@3x3CustomTamar 6 лет назад

Awesome! Thanks so Much!

@DIYPD 6 лет назад

I'm so impressed from the way you've done it!!! That was incredible and the result stunning!

@3x3CustomTamar 6 лет назад

Thanks so Much! I was pleasantly surprised with the result!

@stevenmoralez6377 5 лет назад

Ingenious use of the cutoffs. I’m a fan.

@3x3CustomTamar 5 лет назад

Thanks!

@screwlewse 3 года назад

I think the poplar worked really well for this project because the dark/light contrast makes it really unique. Nicely done!

@3x3CustomTamar 3 года назад

Thanks!

@ZacJones 6 лет назад

That’s an incredible Jig! I wood never think to make something like that, great job!

@3x3CustomTamar 6 лет назад

Thanks! I was pleasantly surprised it worked!

@10MinuteWorkshop 6 лет назад

That’s got to be the best finish on any bowl in this challenge. Really great work 👍 Subscribed.

@3x3CustomTamar 6 лет назад

Thanks so much! It was so fun to figure out

@theguitarpicker 6 лет назад

That was clever. I have to admit, I would have never thought of that. A tip: when you glue up two pieces of wood like that sprinkle a pinch of salt over the area, it provides grit to keep the blanks from slipping and melts away when the glue dries. Makes it easier to keep everything aligned.

@3x3CustomTamar 6 лет назад

Thanks!

@loganrobinson363 6 лет назад

This woman is brilliant. Very well done. 🖒😚

@3x3CustomTamar 6 лет назад

Haha! My teachers would laugh if they read that. Thanks!

@blazer6248 4 года назад

Next on the list to watch? The SG cutting board. That thing is SWEET! ❤️

@3x3CustomTamar 4 года назад

Hope you enjoy!

@andrewroberts6158 6 лет назад

the two things I love about this 1- it does look like you used a lathe and 2- you still had ten fingers at the end, happy woodworking

@3x3CustomTamar 6 лет назад

Haha! Both good things. Thanks!

@jeffg377 5 лет назад

You are totally awesome . That was a incredible the way made the jigs and shaped it all out !!!

@3x3CustomTamar 5 лет назад

Thanks so much! It was really fun to figure out

@marcsalmon626 4 года назад

Another superb project. I would never have thought of making a jig like that to shape a bowl. You're the queen of jigs 👍

@3x3CustomTamar 4 года назад

Haha! Thanks!

@MikeMerzke 6 лет назад

Beautiful bowl! I really enjoyed watching you problem solve and figure out the best technique as you went. Good job and keep up the good work!

@3x3CustomTamar 6 лет назад

Thanks so much mike! This was a fun one to figure out

6 лет назад

Very clever and the result is beautiful.

@3x3CustomTamar 6 лет назад

Thanks so much!

@edheide7229 5 лет назад

Very informative narration, when I need to take a course I want someone like you to be the instructor. Great job, thanks for sharing.

@3x3CustomTamar 5 лет назад

That’s awesome to hear! Thanks so much!

@brinymarlinable 3 года назад

This is awesome! It looks great and I love being able to see your process in making this and how you problem solve along the way. It's super inspiring! Well done!

@3x3CustomTamar 3 года назад

So glad you like it. Thanks!

@20pump 5 лет назад

Great job. Like the way you rose to the challenge. Smart use of the tools on hand.

@3x3CustomTamar 5 лет назад

Thanks so much! It would have been so much easier with a lathe though. Ha

@JuanGarcia-1125 2 года назад

No sé cómo no había visto éste vídeo! Eres lo MÁXIMO Tamar!!! Gracias por compartir tan excelente contenido amiga! Saludos desde Reynosa México!!!

@BronkBuilt 6 лет назад

What a great idea. That came out great. I really want to give this a try.

@3x3CustomTamar 6 лет назад

Thanks! Just a warning. It took me a while.... ha

@shopart1488 5 лет назад

Awesome, love the ingenuity!! Great job explaining the process.

@3x3CustomTamar 5 лет назад

Thanks so much! This was a challenging one for sure. Ha

@DoItProjects 6 лет назад

Very, very cool! You really engineered the crap out of that. If you told me it was turned, I’d believe you.

@3x3CustomTamar 6 лет назад

Well then it’s a success! Thanks so much!!

@SG-op6nc 5 лет назад

The jigs are brilliant!!! Remind me of the mechanical drawing classes in first yr of engineering.. parabolas, cross sections of cones etc.

@3x3CustomTamar 5 лет назад

Thanks! I wish I took engineering classes. I probably would have enjoyed that. Ha

@SG-op6nc 5 лет назад

@@3x3CustomTamar you would have aced them! Btw i was watching the video of the keyboard stand you made. I haven't seen all your videos yet but I think maybe sometime you could make one introducing all your non power tools and jigs.. or maybe the top10 most useful ones? Just a thought..

@3x3CustomTamar 5 лет назад

S G interesting thought.

@atlas227428 5 лет назад

There ya go again Tamar.....being oh so smart and and doing such an awesome job !!! Thanks for sharing !!!! Excellent job !!!

@3x3CustomTamar 5 лет назад

Haha. Thanks!

@raulantonioarayabugueno9047 6 лет назад

Maestra carpintera le quedó muy bonito felicitaciones gracias

@MakeThings 6 лет назад

Looks great! Great ideas!

@3x3CustomTamar 6 лет назад

Thanks so much rob!

@MGMakes 6 лет назад

Stunning end result. Thank you for teaching me some new tricks. Keep up the great work 👊👊👊

@3x3CustomTamar 6 лет назад

Awesome. Thanks!

@muddyfences5559 6 лет назад

A lot of ingenuity and work went into that bowl. It turned out great.

@3x3CustomTamar 6 лет назад

Thanks so much! I think of these jigs while I’m cooking dinner or playing with the kids. Ha!

@SouthernStyleDIY 6 лет назад

That came out so well! Great job!

@3x3CustomTamar 6 лет назад

Thanks so much!

@diyhuntress 5 лет назад

Killed it (as per usual)!

@3x3CustomTamar 5 лет назад

Ha! Thanks Sam! This was a fun one

@qualidadewmetal3592 6 месяцев назад

Hi Tamar! You always surprising us! You are a genius!

@larrydaniels6532 5 лет назад

The result is wonderful,the process however convoluted,shows remarkable flying by the seat of your pants to overcome tool limitations.This project will also instill a sense of priority in the way you start to tackle each one,a lot of time can be saved when there is an orderly plan of action.Planing the boards first,then cutting into 4 identical squares and making sure the glue-up was aligned would have saved a few steps.Maybe you can make another sled for the blade set at 45,would much rather see that,rather than twirling the bowl with the blade fully extended at 45,super-scary!All in all,never cease to amaze.

@PJGalati 6 лет назад

After following on Instagram, I really enjoyed this video! I think the bowl came out great and your ideas were spot on! Nicely done Tamar!

@3x3CustomTamar 6 лет назад

Thanks so much! So happy my Instagram posts are paying off!! Haha!

@danedewaard8215 4 года назад

This was an amazing exercise in demonstrating that the correct tool for the job can reduce time and effort by an enormous amount!!!!! I think you came up with some great solutions to the "Bowl Without a Lathe Challenge" and made a bowl that is indistinguishable from one that is purely lathe made!!! Great video!

@3x3CustomTamar 4 года назад

Thanks! I can’t wait to actually get a lathe so I don’t need to do all these crazy work arounds!! Ha!

@oakandash4200 5 лет назад

The ball looks amazing! Thank you for giving me an idea!

@3x3CustomTamar 5 лет назад

Awesome! Thanks!

@DoctorCraig1960 Год назад

Very talented with the jigs

@drumak77 6 лет назад

Good on you for persisting over every hurdle. That is definitely a great looking bowl.

@3x3CustomTamar 6 лет назад

Thanks! It’s not called a challenge for nothing! Haha

@jeffoldham3466 3 года назад

first of all the bowl looks great and you are one more smart woman,,,keep the videos coming

@3x3CustomTamar 3 года назад

Thanks!

@WoodwardBuilds 6 лет назад

So awesome Tamar! Always thinking outside the box.... Or bowl :)

@3x3CustomTamar 6 лет назад

Hahaha! Best joke yet. Thanks!!

@patriotamerican62 4 года назад

Wow, Very creative. I like it when you start with a plan and finish it with the same plan. I think it was the hard way, doing it. Lathe would have been easier. But Good Working with wood.

@3x3CustomTamar 4 года назад

Of course a lathe would be easier. But the challenge was to make a bowl without one. Ha. I want one now.

@ritorgroose 6 лет назад

WOW its brilliant. You have incredible imagination

@3x3CustomTamar 6 лет назад

Thanks! ☺️☺️

@bigronxxxx 6 лет назад

Tamar i think the bowl looks amazing you are really quickly building up a arsenal of knowledge mainly by just not being afraid to fail and i think that just proves how great of a maker you are becoming,please keep being fearless of failure all masters of their craft whether it be food or basket weaving have failed many more times than succeeding,so really they failed their way to success,thanks for sharing your hard work with us,all the best to you and your family

@3x3CustomTamar 6 лет назад

Thanks so much Ron! I hope ppl watch my video and attempt something they’ve never done before just for that reason

@MultiTom1956 6 лет назад

Tamar, that's a new way I have learned to make a bowl 👌👌it's beautiful. Thank you very much

@3x3CustomTamar 6 лет назад

Thanks so much!

@FredMcIntyre 6 лет назад

Amazing job Tamar! 👍👊 That bowl looks awesome! 😍

@3x3CustomTamar 6 лет назад

Thanks so much Fred!

@lucastsch 5 лет назад

Nice. Love the commentary. Woodworking= adapting

@3x3CustomTamar 5 лет назад

Thanks!

@Original_Flanno 6 лет назад

Looks awesome. Loved going through this with you and seeing all the learning experiences and innovative solutions :)

@3x3CustomTamar 6 лет назад

Thanks! It was fun to figure out

@kookyflukes9749 6 лет назад

Was intrigued, then impressed, then subscribed. Great problem solving skills.

@3x3CustomTamar 6 лет назад

Haha! Awesome! Thanks!

@erykfreethinker7147 5 лет назад

Sheer genius! I like the way you thought out the jigs and met each challenge in uncharted territory! I hope you are able to have a lathe and you deserve be able to have any tool you desire - as your work will inspire many, many people.

@3x3CustomTamar 5 лет назад

I really appreciate that! Thanks! I hope to get a lathe one day.

@erykfreethinker7147 5 лет назад

You are welcome, I made myself a rudimentary lathe years ago with a washing machine motor and adapted items of discarded industrial machinery. The problem was getting a set of reliable speeds but the challenges were fun. I wonder if you have a scrapyard where you are that takes in commercial obsoletes or maybe an ex-forces supply yard. You certainly have the imagination to see where a piece of equipment can be adapted. I bet these days there are even You Tube films showing how to do it! The internet was not around when I made mine!!! :) The following may at least inspire you;- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XCt3LooUVsQ.html

@Heyitscryz 5 лет назад

Thank you for this router jig inspiration. I have to change the design a little for my project, but your video safes my project. Thank you again so much 🤓✌🏻⚒️

@3x3CustomTamar 5 лет назад

Awesome! So happy it inspired you!

@krabenaldt7605 4 года назад

Very interesting how you figured out all the techniques. This does convince me I need a lathe. lol

@3x3CustomTamar 4 года назад

Haha me too..

@X3WorkshopDesigns 6 лет назад

WOW! That's freaking awesome! It was interesting to watch you come up with jigs to make it work. I honestly wouldn't even know how I would make a bowl without a lathe. Great job!

@3x3CustomTamar 6 лет назад

Thanks so much! I had no idea how I was going to do it. But it was fun to figure out!

@williambranham6249 6 лет назад

Congratulations. You are one persistent, deep thinking young lady.

@3x3CustomTamar 6 лет назад

Haha! I’m definitely persistent.

@P4brotagonist 6 лет назад

I have no clue why you would ever do this(besides just proving that you can), but this is one of the most intense pieces of woodworking I have ever seen. I am really impressed by the ingenuity of your various jigs.

@3x3CustomTamar 6 лет назад

That’s actually the only reason I would ever do this. Ha. Thanks!

@Badgerworkshop 6 лет назад

Great work. really does look like it was turned on a lathe

@3x3CustomTamar 6 лет назад

Thanks! That’s what I was hoping for! I’m sure a real lathe would be so fun though

@jarodsown2596 6 лет назад

I'm jealous. I have all the tools because I lack the ingenuity and creativeness to do things without. This turned out awesome and I still can't get over how perfect it looks, all without a lathe.

@3x3CustomTamar 6 лет назад

Thanks! I couldn’t believe I was able to get the walls so thin