Box Offsets, 3 Point Saddle Bend, Parallel EMT Bends and Concentric 90° Stubs all in One Conduit

Подписаться 216 тыс.

Просмотров 903 тыс.

50% 1

DEWALT DW0825LG 12V 5 Spot + Cross Line Laser, Green: Amazon: amzn.to/2z5jzOk
DEWALT DCF815S2 12-Volt Max 1/4-Inch Impact Driver Kit: Amazon: amzn.to/2XNkm5e
Klein Tools 9216 Tape Measure for electricians. It has conduit bending tables on one side! Heavy-Duty 16-Foot Double-Hook Double-Sided Nylon Reinforced Blade, with Metal Belt Clip: Amazon: amzn.to/444nXMh
Klein Tools 935RBLT Level, Lighted Torpedo Level with Magnet, 3 Vials and V-Groove, Water and Impact Resistant, Great for Conduit Bending: Amazon: amzn.to/38ixHUI
You can see my 38 video series: "EMT Bending by Sparky Channel" here: • EMT Bending by Sparky ...
Ideal 74-046 Aluminum Bender with Handle for 1/2" EMT Conduit: Amazon: amzn.to/2spYnCq
Ideal 74-047 Aluminum Bender with Handle for 3/4" EMT Conduit: Amazon: amzn.to/2slKiFo
Ideal 74-026 1/2" Malleable iron EMT Bender w/Handle: Amazon: amzn.to/2rfBLjQ
Klein Tools RT250 GFCI Outlet Tester with LCD Display, Electric Voltage Tester for Standard 3-Wire 120V Electrical Receptacles: Amazon: amzn.to/3IZrHox
Klein Tools MM320KIT Digital Multimeter Electrical Test Kit, Non-Contact Voltage Tester, Receptacle Tester, Carrying Case and Batteries: Amazon: amzn.to/3xiFpQQ
Klein Tools 80016 Circuit Breaker Finder Tool Kit with Accessories, 2-Piece Set, Includes Cat. No. ET310 and Cat. No. 69411: Amazon: amzn.to/4afXjlI
Klein Tools ET450 Advanced Circuit Breaker Finder and Wire Tracer Kit for Energized and Non-Energized Breakers, Fuses, and Wires: Amazon: amzn.to/43JgiTA
Klein Tools 1009 Multi Tool, Wire Stripper, Crimping Tool, Wire Cutter, Long-Nose Multi-Purpose Electrician Tool: Amazon: amzn.to/3TZdOwU
Klein Tools K1412 Wire Cutter / Wire Stripper, Made in USA, Dual NM Cable Stripper / Cutter Cuts Solid Copper Wire, Strips 12 and 14 AWG Solid Wire
Klein Tools 51606 Aluminum Conduit Bender Full Assembly, 1/2-Inch EMT, Wide Food Pedal, Benchmark Symbols and Angle Setter: Amazon: amzn.to/3TzsYYm
Klein Tools 51604 Iron Conduit Bender Full Assembly, 3/4-Inch EMT and 1/2-Inch Rigid, Wide Foot Pedal, Benchmark Symbols and Angle Setter: Amazon: amzn.to/3xpvKb4
Klein Tools 5167 Leather Tool Pouch, 11-Pocket: Amazon: amzn.to/3DuuSCi
Klein Tools 85091 Power Conduit Reamer with Improved Bit Retention, 1/2-, 3/4- and 1-Inch: Amazon: amzn.to/2Vz5YMf: Amazon: amzn.to/350Syf8
Klein Tools MAG2 Demagnetizer / Magnetizer for Screwdriver Bits and Tips, Makes Tools Magnetic with Powerful Rare-Earth Magnet: Amazon: amzn.to/2XZsK1J
Milwaukee M12 FUEL™ Compact Band Saw Kit 2529-21XC: Acme Tools: imp.i284638.net/P0j7yN
Milwaukee M12 FUEL™ Compact Band Saw Bare Tool: Acme Tools: imp.i284638.net/rn4gBv
30-9/16 In. 12/14 TPI Compact Extreme Thin Metal Band Saw Blade 3Pk: Acme Tools: imp.i284638.net/e4vYKD
MILWAUKEE M18 FUEL™ Compact Band Saw Kit: Acme Tools: imp.i284638.net/kjgRNd
MILWAUKEE M18 FUEL™ Compact Band Saw (Bare Tool): Acme Tools: imp.i284638.net/rn4gBv
Milwaukee Compact Band Saw Reamer Attachment 49-90-2029: Acme Tools: imp.i284638.net/mgRn01DEWALT DW0825LG 12V 5 Spot + Cross Line Laser, Green: Amazon: amzn.to/2z5jzOk
Conduit Fitting and Reaming Screwdriver for 1/2-Inch, 3/4-Inch, and 1-Inch Thin-Wall Conduit Klein Tools 85191
Tables mentioned in the video: www.kleintools.com/sites/klei...
Milwaukee Hard Hats, assorted styles: Acme Tools: shrsl.com/1uqvc
Milwaukee Conduit Benders, assorted: Acme Tools: shrsl.com/1uqvj
Makita XBP03T 18V LXT Lithium-Ion Cordless Compact Band Saw Kit (5.0Ah): Amazon: amzn.to/2VnRzB4
Makita XBP03Z 18V LXT Lithium-Ion Cordless Compact Band Saw, Tool Only: Amazon: amzn.to/2Iwt8w2
DEWALT 20V MAX Portable Band Saw, Tool Only (DCS371B): Amazon: amzn.to/30b8hsK
DEWALT 20V MAX Portable Band Saw Kit (DCS371P1): Amazon: amzn.to/3045YYu
Conduit Bending Chart: pdf.lowes.com/howtoguides/7832...
Klein Tools 935DAG Digital Electronic Level and Angle Gauge, Measures 0 - 90 and 0 - 180 Degree Ranges, Measures and Sets Angles: Amazon: amzn.to/2vOvoLM
Klein Tools MAG2 Demagnetizer / Magnetizer for Screwdriver Bits and Tips, Makes Tools Magnetic with Powerful Rare-Earth Magnet: Amazon: amzn.to/2XZsK1J
Amazon Prime Student 6-month Free Trial: amzn.to/3kFkEVm
Amazon Audible Plus 30 days free! Listen to thousands of Audible Originals, audiobooks, and podcasts. amzn.to/3gF9jDC
As an Amazon Associate I earn from qualifying purchases.
Bill and sparkychannel.com are participants in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

Опубликовано:

26 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 700

@SparkyChannel Месяц назад

Ideal 74-046 Aluminum Bender with Handle for 1/2" EMT Conduit: Amazon: amzn.to/2spYnCq Also see: Playlist: EMT Bending by Sparky Channel: ru-vid.com/group/PLSD43kAzjUIT9C0yzPTkqULBCmJXX_goh Playlist: Electrical Wiring by Sparky Channel: ru-vid.com/group/PLSD43kAzjUITARtRyFqvVhmqwNm34Ck5k Playlist: 2023 NEC Video Playlist by Sparky Channel: ru-vid.com/group/PLSD43kAzjUISg0qOUMomYe8GH6a_C2xBv Playlist: IDEAL National Championship Competition Videos from Sparky Channel: ru-vid.com/group/PLSD43kAzjUIRfq58lAqj2dXKhTY_8QaDO

@David-uj2ms 3 года назад

This is exactly how we were taught in the IBEW. I am no longer an Inside wireman but sometimes I have to be as an Industrial mechanic. When I need a refresher your videos are a lifesaver. There is real financial value in what you are teaching. I thank you immensely for doing it for free. i happily subscribed.

@SparkyChannel 3 года назад

Thanks David! Welcome to Sparky Channel!

@noahflores5515 2 года назад

Mr sparky, you shouldda go on a tour teaching, I ll attend one of your seminars, Thanks I learned a lot with this vid.

@gustavocasas8654 2 года назад

Why are you no longer in the IBEW?

@williamfortner8476 2 года назад

I can do all but the saddle. I never got the hang of 3 points. The rest is simple.

@icthruyou4824 2 года назад

Same as me, I used to do pipe often , but since I haven’t I’ve come here for refreshers

@liamwelsh5565 3 года назад

Your the first person I've seen actually measure a box offset.

@SparkyChannel 3 года назад

It's good to teach it that way for those who are just learning this skill. Later on, when they are experienced, they can try doing it by eye.

@ReviRuling 3 года назад

Foreal but I’m not mad at it 💪🏾

@danielhady3021 3 года назад

I got into the habit of marking my box offsets after watching the Ideal video with Ron. I do it for consistency. Now I can eye ball it, but if I need to do a bunch to match I'll take the extra few secs to mark them out.

@ReviRuling 3 года назад

@@danielhady3021 you can save time by using 4 fingers from end of pipe to first mark every time without measuring

@martf4701 3 года назад

@@fredbledsoe9841 exactly. When we were allowed to run pipes in steeldeck, i automaticly knew were to put my hand on the bender and when the pipe reached it, i left my hand there and simply turn the pipe and bend it again until it reached my hand with the same feel. 2" offset quick and easy. Almost never had to correct it ..perfect offset without having to compare it with an other straight pipe. Like you said, muscle memory!

@davenag957 2 года назад

I bent my first pipe in 1977 and still doing it to this day. I learned all my tricks from watching guys like you on the job. Nothing is as pretty as a bunch of parallel pipes with perfect bands. I hate walking up to somebody else's job and having to run my stuff crooked so that it looks straight because the last guy didn't take the time. When an inspector walks up and sees a nice pipe job, he knows that you know what you're doing and will be nice to you on every job in the future. I developed some good relationships with inspectors over the years this way.

@SparkyChannel 2 года назад

Thanks so much! 1977 was a good year! Yes, it's important to gain the trust of an inspector by having him respect your work!

@davenag957 2 года назад

@@SparkyChannel I was 15 when I learned from my first mentor. Another man I worked with was an old gray guy in his mid 70s. The man knew his stuff! Another taught me that I'm not just bending pipe, I'm covering wire. I always keep the wire and pull in mind when you're running your pipe. You're not just connecting boxes.

@touchofgrey8922 2 года назад

I started in 80. Still doing it to this day. Pipe work is nice...but, as a 1 man show, I don't have the time to make it perfect. You can make your bends a bit long long and trim with a recip saw. Time is $, couplers are cheap. Makes for a good video. Apparently I don't like bending over my work to check angle degrees. I was glad to finally see the bender head in the air, not on the ground. That's my .02

@richmaint 3 года назад

I Like this Guy, I'm in my 26th year of electrical, and I appreciate seeing other vets.

@SparkyChannel 3 года назад

Thanks so much Rich!

@Dallastexas1215 3 года назад

I have been plumbing for about 28 years, just kinda stuck with it, but working alongside electricians has always made me jealous. you guys have the best tools and the cleanest tools. If I had to do all over again, I would definitely be a Sparky. Great video.

@LayneCocaine 3 года назад

I went into electrical because my dad was a drywall finisher and I wanted to go into the trades too, he said I should be a plumber or an electrician because theres more work year round up here in Wisconsin. I went with electrical cause I always liked math and computers, I really like it, but I like building my house overall too.

@SparkyChannel 3 года назад

I worked professionally as a concrete finisher, plasterer, roofer, plumber, carpenter and draftsman. I became jealous of the electrician's like you did so I became one. IMO it's the best trade. Thanks!

@yemenbaw1 Год назад

You’re like the Bob Ross of pipe bending. Great explanation and enjoyable to watch. Thank you

@SparkyChannel Год назад

Huge compliment! RIP Bob!

@Hogiedaddy 3 года назад

I cant beleive this is free. God bless you man. Id pay you just to have a few hours of your time to learn more. I start today as an apprentice doing conduit bending. Im nervous but excited at the same time. Thank you for taking your time and showing us.

@SparkyChannel 3 года назад

GBY as well! Best wishes!

@davidmunoz8326 3 года назад

How's it going man?? I'm looking to start my career as well

@SparkyChannel 3 года назад

@@davidmunoz8326 Excellent! It's the best trade IMO.

@davidmunoz8326 3 года назад

@@SparkyChannel i just graduated from trade school and am looking into getting in the field. Any tips?

@Kheti1234 3 года назад

I’ve been a commercial electrician for around 35 years. Words of advice are to watch any videos you can find on electrical. There are basic videos of basic wiring and more technical videos on lighting controls, motor controls, and PLC’s for example. It only benefits you to learn as much as you can on your career. (Another suggestion, buy a GREENLEE conduit bender.There are more markings for guidance.)

@doninmichigan 2 года назад

Young guys starting out in the trade do not realize how much they've got it made nowdays, with the availability of info on the internet especially You Tube. The stuff this gentleman is teaching on his channel is essential fundamental knowledge that I learned when I started in the early 80's and you need to learn too to become knowledgeable and competent in the trade, and down the road when you test for your Master's License.

@SparkyChannel 2 года назад

Right on brother! ⚡

@bwats1991 2 года назад

I was just thinking about this the other day. So much knowledge available on the internet. I feel like a lot of people take it for granted.

@Billy-jo3bt 8 месяцев назад

I wish the IEC taught it that in depth. Thank you for taking the time to be so clear and detailed. The three point saddle was something I just could not get the concept of and you showed just how easy it was. I feel like I could go do it now.

@SparkyChannel 8 месяцев назад

Glad it was helpful!

@user-qk8vc8bl6x 8 месяцев назад

I absolutely loved your casual demeanor on this video

@SparkyChannel 8 месяцев назад

Thanks so much. That's the way I work in real life. You live longer that way. lol! I learned it from my Dad, and I hope I can pass it on to others.

@bennylee4464 2 года назад

I’m glad i can come to your channel to learn what my trade school is unable to teach Because of time restrictions, thank you

@SparkyChannel 2 года назад

I'm glad I could help!

@franklindiaz4411 3 года назад

The world needs people like you champion. Thanks for your video.

@SparkyChannel 3 года назад

My pleasure, thanks Franklyn!

@PoshingtonSpark Год назад

What a great resource for electricians. Completed my apprenticeship and now going to test with the ibew. These bends are the exact ones i have to study for my JW test

@SparkyChannel Год назад

Fantastic! You can do it!

@Al_Gore_Rhythmn Год назад

As a 1st year apprentice this was immensely helpful. You explained it in a way that leaves absolutely zero questions.

@SparkyChannel Год назад

Great to hear! Thanks!

@Rocketman88002 3 года назад

Very good instructional, presented well, explained thoroughly and demonstrated flawlessly. I never did catch on to bending EMT the right way...methodically even though I got to help wire everything from the switch room to the transformers, circuit breaker panels, fuse boxes and outlets in a new production facility. Wish I had seen your videos back then. Retired now but not afraid now to help bend EMT. Thank you for these excellent tutorials!

@SparkyChannel 3 года назад

Hi Rene! Thanks for your years of service helping to build America!

@danielhady3021 3 года назад

This is how I was taught in 1st yr of the IBEW program. Learning the math, shrink factors, and multipliers. I try to use this method as much as possible as opposed to cut to fit to keep myself sharp. You make it look so easy and natural. 3 pt and 4 pt saddles are really easy to mess up with dog legs etc. 1/2" emt is atleast easy to fix but it gets a lot tougher with the larger diameters or RMC.

@travisbruno5964 2 года назад

Ive been bending conduit for 15plus yrs and i have to say your a great teacher so keep it up and God Bless

@SparkyChannel 2 года назад

Wow, thanks!

@samfromalaska7997 Год назад

I am a journeyman electrician in Alaska with IBEW 1547 and I adore watching your videos. I send your videos to my apprentices

@SparkyChannel Год назад

That is awesome! Thanks so much Sam. If you would like some Sparky Channel stickers write me at wpm44@yahoo.com and I'll send you some. I have 3 kinds: regular, Power Calcs and emt bending.

@Bendover-ry7vk 3 года назад

Just finished my trade school last year this video helped me tremendously thank you for the time out of your day and great job btw

@SparkyChannel 3 года назад

Thanks so much!

@stevendaniels8652 3 года назад

Wow, thank you so much! I learn so much better after work and , at my own pace, learning from you. Priceless knowledge. Thank you again!

@SparkyChannel 3 года назад

Excellent, thanks Steven!

@joshuabrothers-ms2eq Год назад

Thank you, I really appreciate you taking the time to share your wisdom with us- priceless

@TeslaBoy123 2 года назад

Beautiful work after 25 years on electrical field in Chicago Illinois bending conduit I still learning 👍👍👍

@SparkyChannel 2 года назад

Fantastic! I'm still learning too!

@prozay6856 2 года назад

Hey bill GREAT Video!!! In my 12 years of being an residential and comercial electrician in NYC, Bending conduits of different types and sizes is almost part of every project. one thing I have never done myself is bending concentric 90s using EMT. It would be a great video to help us who know about it learn about it. 👍

@SparkyChannel 2 года назад

I have a few on the subject. Here's one: IDEAL National Championship Pro 2nd Round Parallel EMT Bends: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UJka4Z5LemY.html

@mikechavez9332 3 года назад

My respects 👏🏼 first journey/master electrician seen actually measure a box 📦 offset. Always been told just to eye it, and remember my first two years always going over haha.

@SparkyChannel 3 года назад

Thanks Mike!

@jackal5359 Год назад

We just got into conduit bending in the level one electrical course I’m taking and this cleared up a ton of the confusion I had. Good stuff

@SparkyChannel Год назад

Excellent!

@gerhardschemel3565 2 года назад

After years of running raceway of all types EMT GRC IMC PVC NMT and my favorite of all has to be Greenfield and no inside screw connectors! But yes I was able to do a lot of bends by feel and a general measurement mostly for length. Now the work of art that is being demonstrated is different and all angles have to line up accordingly. Most excellent presentation.

@SparkyChannel Год назад

Thanks so much!

@Foxdie525 3 года назад

Been watching you for a few years. I’m still in my apprenticeship.your a top notch electrician. Thanks for the video!

@SparkyChannel 3 года назад

I appreciate that! Thanks so much!

@JustOneRedSoloCup 4 года назад

Nothing looks more professional than proper offsets, parallel bends, and concentric 90 degree stubs. _"Make it look professional"_ is such an underrated statement/request!

@SparkyChannel 4 года назад

Well said! Thanks so much, I totally agree! :)

@sum2automation 3 года назад

Yup, after 40 plus years as an electrician, I must say. I'm truly grateful for the good engineers electrician and programmers that have shared skills with me over the years. I'm still learning after Years of IBEW and DBA industrial automation systems. Electrical trade is the best, I still love going to work and have never ever been without work. The science of electricity is amazing, We truly make life and the world a better place... Love to see shared knowledge and is nothing better than group's of concentric conduits installed correctly! It's an art.

@SparkyChannel 3 года назад

I sure do agree! Thanks!

@zapantalambda 3 года назад

Watching this vid encourages me to proceed being a sparky. Thank you for this video. I enjoyed watching it.

@SparkyChannel 3 года назад

You can do it!

@maleparagonultragod8240 3 года назад

When I started reading my conduit bending book I knew that this subject was going to be easier learn visually. Now I can see the math with practical application. Thank you sir

@SparkyChannel 3 года назад

Excellent! Sounds right to me. I learn much better visually too.

@Stuart68505 2 года назад

Very helpful. Nice introduction to accurately bending conduit. There sure is a lot involved.

@SparkyChannel 2 года назад

Glad it was helpful! Thanks Stuart!

@aaronbutler9629 3 года назад

You are a gifted teacher...thank you!

@SparkyChannel 3 года назад

Thanks Aaron!

@smiththomas64 4 месяца назад

I could have used this back in 04. Thanks for posting! I like pipe bending videos.

@SparkyChannel 4 месяца назад

You're welcome!

@jakehart9891 4 года назад

I just started my first site Monday as a jw. Bending emt is and always was my thing. Always was the guy piping electrical rooms and all that. I see a lot of apprentices in these comments. My biggest piece of advice, don’t overthink this stuff, and it’s gonna take you some time to be able to bend nice and clean and find the best routes.

@SparkyChannel 4 года назад

I love it! And congrats on becoming Journeyman Wireman!

@ubrayj02 3 года назад

Did you set up a practice wall at home to work through the learning curve?

@jakehart9891 3 года назад

ubrayj02 no. Haha. I worked under a couple of old timers. Just real pain in the ass, bitter dudes that would yell and yell until it was right. It just takes time and effort man. This entire trade gives you what you put into it. Always remember, Rome wasn’t built in a day. Haha.

@oscarzaragoza6516 3 года назад

That is exactly right. Don't over think it

@MikeBramm 4 года назад

Another great video Bill. That wall is really starting to look like an industrial power distribution center.

@SparkyChannel 4 года назад

LOL! Thanks Mike!

@volcomguy51 4 года назад

I enjoy the reviews and tips you share. I just quit telecom and started doing commercial electrical and what you share will be greatly used in the field.

@SparkyChannel 4 года назад

That is awesome! Thanks!

@mrpowerfader7962 Год назад

This video is a life saver, as it very simply explained exactly what I needed to know.

@SparkyChannel Год назад

Thanks!

@heuliseslopez4204 2 года назад

Thank you so much for making these video! Simple and professional and great knowledge 😃🙌😎

@SparkyChannel 2 года назад

Thanks!

@JRam757 3 года назад

Saw this while in Trade School as part of the visual learning in the Level 1 curriculum before we actually bent some conduit, was incredibly helpful

@SparkyChannel 3 года назад

Awesome, what trade school did you go to?

@whatnowok 3 года назад

Thanks sparky, I learn better by showing/ doing.

@summerseve502 3 года назад

I actually feel smarter after watching this video lol. You made it too easy to learn.

@SparkyChannel 3 года назад

That's great, thanks Joshua!

@spelunkerd 2 года назад

Interesting methodology. Sin(10 deg) = 1/5.76, which is close enough to 1/6 to remember without a calculator. And the one side 'shrink' is (1-cos(22.5))*(height/sin(22.5)) = 0.2*height, which is rounded to 3/16" per inch on an old style tape measure. With all of this complexity, it is easy to see how experienced guys choose one method, memorize the ratios, and use them every day. Best video I've found on this topic.

@SparkyChannel 2 года назад

Thanks so much!

@czependoza Год назад

Thank you very much you're really professional I wish we have a more people like this in the field

@SparkyChannel Год назад

Thanks so much!

@sherrokinchen5253 3 года назад

Conduit bending was one of the programs I took at a technical college. It was so much fun bending 1/2”,3/4,”1” and 2” EMT.

@SparkyChannel 3 года назад

Excellent!

@davidcooper4385 3 года назад

I taught myself how to bend pipe started with 1 1/4 emt a 90 degree bend not hard at all for me...

@XeononC1 2 года назад

Its to the point without wasting screen time i love it

@SparkyChannel Год назад

Remember to take a 5 minute break b4 starting. LOL!

@lincolnuland5443 Год назад

This guy is an excellent teacher.

@SparkyChannel Год назад

Thanks Lincoln!

@johnjacobjinglehimerschmid3555 3 года назад

Now this is a tutorial. Information on why to do what you need to do. Plainly written out the data needed. Clear description of that to do as it's being done.

@SparkyChannel 3 года назад

Thanks John!

@lwild04 11 месяцев назад

Omg 😮I love this channel and as new sparky this is gold!! I’m goin to make myself a board like this to practice my bends

@SparkyChannel 2 месяца назад

Excellent!

@lexb1892 Год назад

Thanks Sparky! you're the best.

@SparkyChannel Год назад

Thanks Lex!

@garydudgeon 4 года назад

You make it look easy. Thanks Sparky.

@SparkyChannel 4 года назад

Thanks so much Gary!

@joegi5826 3 года назад

This bending crap...gives me a brain tumor! I stick with plumbing better! Turd chasers...all the way!

@keyboardbeats Год назад

This is awesome thanks for the education, from one sparky to another, Cheers 🍻from Az….

@SparkyChannel Год назад

Cheers!

@jonrezboy5081 2 года назад

Nice illustration “Sparky” love your feed One thing though you forgot to show the last box offset Learning more and more from your channel

@fariborzbashardoost1511 4 года назад

Another excellent video Sparky. Thanks

@SparkyChannel 4 года назад

Glad you enjoyed it, thanks!

@kevinmcmaster9872 Год назад

the Scotty Kilmer of electrical

@SparkyChannel Год назад

LOL!

@TheFalconJetDriver Год назад

I was thinking the exact same thing! I though they must be brothers!😁🛫

@mariochavez431 Год назад

I’m 42 years old and I’m just learning how to bend pipe thank you

@SparkyChannel Год назад

Fantastic! Best wishes.

@shawnfschooleyjr6592 2 года назад

I’m very blessed. As an ibew jw inside wireman. Ive took great pleasure in learning conduit, and am arguably one of the best in my local on any side -emt, rigid, or robroy. Its art and should be treated as such

@SparkyChannel 2 года назад

I agree!

@robertarguello1115 Год назад

Congradulations! You did excellent work. 👍

@SparkyChannel Год назад

Thanks Robert!

@Silverone858lol 3 года назад

I would just like to add, the arrow is front of bend, notch is center of bend and star is back of bend, any bend any time. I use them all. My three bend saddle is a push though with star, notch, arrow. Great video lots of ways to skin a cat. Thank you

@SparkyChannel 3 года назад

Great tip, thanks!

@OneEyeKillahBee Месяц назад

This was a great video.. I’m very grateful because my instructor is not that good on teaching.

@KenPryor 4 года назад

Excellent video. I've been learning so much from you. Thanks!

@SparkyChannel 4 года назад

Hi Ken! That's great to hear, thanks!

@ku4nz 3 года назад

Good job teaching. Very helpful. Thanks

@SparkyChannel 3 года назад

Thanks Richard!

@TheLizardKing653 3 года назад

Applied for my electrician apprenticeship.. my brother been teaching me since he is a electrician himself and trying get me a job so i gotta learn as much as i can

@SparkyChannel 3 года назад

That's great Roberto!

@maynethatismad 2 года назад

You get into an apprenticeship yet?

@buynsell365 День назад

Excellent........... This was great.

@ulisesgranados8836 Год назад

Just learning to bend pipe. Thank you sir

@SparkyChannel Год назад

You can do it!

@goodolarchie Год назад

I just chanced on your video in the recommendations, not working with any conduit, but this is just awesome and satisfying to watch. I only occasionally bend copper and do sheet metal braking but this makes me want to run some EMT lol

@SparkyChannel Год назад

Thanks for giving Sparky Channel a watch!

@qibble455 3 года назад

Bump for your new channel op. Bet it's even better.

@SparkyChannel 3 года назад

I think so. Thanks!

@MWorsa 3 года назад

I love looking at conduit runs in amusement parks 🙂

@SparkyChannel 3 года назад

Me too! :)

@MarcoPolo-zc6zo 3 года назад

That’s great. Years back I got questioned by security at Disneyland when I was following their fire raceways.

@SparkyChannel 3 года назад

@@MarcoPolo-zc6zo LOL! I know exactly what you're saying.

@silverdrillpickle7596 3 года назад

Find a job you love; never work another day of you life. Great video. 😊

@SparkyChannel 3 года назад

Nice!

@waltmooredanwilson8754 3 года назад

Very good video. Very educational. I learned a lot from it. Thanks for sharing. Take care and God Bless.

@SparkyChannel 3 года назад

Excellent! God Bless you as well!

@sukbadaimonghol1089 2 года назад

Sparky is awesome instructor.👍

@SparkyChannel 2 года назад

Thanks so much!

@bubbacole1657 2 года назад

Thank you for the info. I will get some 1/2 inch Conduit and practice, practice, practice

@SparkyChannel Год назад

Excellent!

@cookinwithchris86 Год назад

The best teacher for bending pipe

@SparkyChannel Год назад

Thanks so much!

@bobthompson914 3 года назад

Thanks so much again!! I will check out the videos soon!

@SparkyChannel 3 года назад

Please do, thanks Bob!

@skrivy5486 2 года назад

Loved this video a lot thank you so much for the clear explanation

@SparkyChannel 2 года назад

Glad it was helpful!

3 года назад

Thank you very much mate I am learning a lot with your videos.

@SparkyChannel 3 года назад

Glad to hear that! Thanks!

@TheFirmest 2 года назад

You're great. Beautiful work

@SparkyChannel Год назад

Thanks so much!

@ccadama 4 года назад

@Sparky Channel. Thanks Bill for these educational videos. I hope they may spark interest in the electrical trades. College education is not for everyone and some have realized it's not for them. Tech and manufacturing jobs don't happen without the carpenters, electricians, HVAC, masons, plumbers, and other trades who build and outfit the buildings. Hope you and your family stay well and safe.

@SparkyChannel 4 года назад

Good points! Thanks and have a great day! You guys stay safe as well.

@blackeagle2269 Год назад

Your are my teacheeeer!! I’m going to tell you that in Spanish too” tu eres mi profesooorrrr “ 😀

@SparkyChannel Год назад

¡Gracias!

@geerap8746 13 дней назад

Sparky you are the man just subscribed

@myshadowkungfu 3 года назад

Best explanation I've seen on youtube.

@SparkyChannel 3 года назад

Thanks so much!

@SparkyChannel 3 года назад

@Mae Barker Excellent!

@SparkyChannel 3 года назад

Thanks!

@southcentral43rd20 3 года назад

Word I'm always told just give it a little ummph and other ummmph lmao

@garysmith9015 2 года назад

I'd like to thank you for your thorough explanation of electrical flow and circuits. Your video has given me confidence in doing certain basic home projects with safety in mind. Thanks sparky!

@cookinwithchris86 Год назад

⚡⚡⚡The best you tube channel for electrical⚡⚡⚡

@SparkyChannel Год назад

Thanks Chris!

@77tropic 3 года назад

You sir, are a very good teacher. Thank you

@SparkyChannel 3 года назад

Thanks David!

@RR31982 2 года назад

Awesome video, very informative. Great job! 👍 I’d love to see more

@SparkyChannel 2 года назад

Thanks, here's a playlist: EMT Bending by Sparky Channel: ru-vid.com/group/PLSD43kAzjUIT9C0yzPTkqULBCmJXX_goh

@RR31982 2 года назад

@@SparkyChannel thank you

@marcojaimes8721 3 года назад

Beautiful tutorial sir thank you very much!!!!!

@SparkyChannel 3 года назад

No problem, thanks!

@dhindz2870 2 года назад

i learn alot and i always watch your channel.

@SparkyChannel 2 года назад

Great to hear!

@-MrRichBiker1967 3 года назад

I WANT YOU AS A PARTNER!!!! wow...what a on point man..great job.

@SparkyChannel 3 года назад

Thanks so much. That's an excellent compliment!

@-MrRichBiker1967 3 года назад

@@SparkyChannel I work for IBEW LCL # 3, and we rarley see excellence like you performed, in your video. you have a great persona, from A-Z. Im sure you did well for yourself/family! god bless. thank you so much for you video's, keep em' coming!

@SparkyChannel 3 года назад

@@-MrRichBiker1967 Thanks! God bless you as well! I hear you guys have been getting a lot of snow in New York. Cheers from San Diego!

@lolnopeJones 3 года назад

Wow this is awesome, amazing detail

@SparkyChannel 3 года назад

Thank you! Cheers!

@lazarevic95 4 года назад

Nice video Bill. I really appreciate them because I'm an apprentice lol

@SparkyChannel 4 года назад

Excellent, that sounds great!

@mcarroll598 2 года назад

I was using that Dewalt laser today laying out a rack of 3” Emt. I’m bending everything on a Greenlee 881able bender.

@SparkyChannel 2 года назад

Excellent! :)

@gusabiomenpuebla Год назад

gracias MASTER, por compartir sus conocimientos

@SparkyChannel Год назад

¡Gracias!

@fredrickkehoe9817 2 года назад

Such a fantastic instructional video. Thank you thank you thank you

@SparkyChannel 2 года назад

Glad it was helpful! Best wishes Fredrick!

@firstnamelastname-td2in 3 года назад

the beginning of the year I started electrical work for 2 months then laid off due to the cough finally got into school for an union apprenticeship and am nervous as anything because I learned hardly anything. I hope someone like you is training me

@SparkyChannel 3 года назад

I understand. Best wishes!

@airsoftindude 3 года назад

Hey, it's not just a cough! I think there is some sneezing too.....

@-MrRichBiker1967 3 года назад

Awwwww....you will be fine, my man. I was just like you, but i came into the app. program at the age of 38, and i was the same way you were....we will show you what you NEED to know, in all aspects of being "on the jobsite', with all proper PPE. And know how. Do not fear, trust me. just do what your told, and show RESPECT to everyone that runs in your path, along your carrier. And DO NOT BURN ANY BRIDGES, its a very small union world!! be safe and ON TIME!

@Ebenezernycit 2 года назад

Great Job Buddy, Thank You!

@SparkyChannel 2 года назад

No problem, thanks!

@Mkitoo 3 года назад

Learning a lot from your videos 🔥🔥🔥

@SparkyChannel 3 года назад

Glad to hear it!

@brahimabdelsadek9534 3 года назад

Marvelous work.

@SparkyChannel 3 года назад

Thank you so much 😀

@RaviSingh-xl3os 2 года назад

I don't kno jack about being an electrician or construction for that matter im a truck driver but dam this video was very interesting 🤔 I wish the teachers in school taught like this more people would pay attention in school if things made sense and are interesting, great video sir you got yourself a subscriber.

@SparkyChannel Год назад

Thanks so much!