Welcome friends to another Box to Bench where I remove the packaging and go right to the bench (after adding pellets, a scope and some air) and shoot the rifle for you, just as it came to me. The hope is to show you what you can expect from a brand new rifle out of the box.
HOPEFULLY YOU READ THESE NOTES.
In this one I take things a little bit further. After a disappointing first couple of rounds I stretch things out even farther and get better results! And then I make a modification (using supplied parts) that makes things even better.
The AEA Challenger Pro is an evolution of design for AEA, and you'll find some similar features (4500psi fill-AR like trigger-all metal construction-folding, adjustable buttstock) but adds things like a tensioned barrel and, most importantly, a regulator. As usual, there is a lot of power on tap. Possibly too much in my opinion, but it can be toned down with a simple change of the transfer port, and in this model there is some degree of graduation though a detent or 10 would be welcome.
In this video I go through the process of mounting an Element Optics Helix FFP scope, fitting a DonnyFL moderator with a prototype of his adapter (the full production model is #A99 and is available now) and then load it up with JSB 34 grain pellets and start off with a group at 65 yards. If you stop there, you'll miss the potential of this rifle.
I also wind up shooting at 35, 90 and 55 yards, and perform a hammer spring swap before I draw my conclusions, so if you are going to watch, you'll want to hang around to the end.
28 авг 2024