Box with a threaded lid

Подписаться 14 тыс.

Просмотров 40 тыс.

50% 1

This video is about Ronald Kanne making a box with a threaded lid on a lathe. Using quarter sawn London Plane and the Hope threading jig.
Camera & Sound: Lies Geluk
About Ronald Kanne
Ronald is a wood turner in the Netherlands. He makes commissioned work and his own free work. And every week turns out to be a little too short to get all the work done... He also runs a webshop for other wood turners. It's called: www.dehoutdraaierij.nl. This webshop is in Dutch, English and German. The website that contains his own work is called www.ronaldkanne.nl. You will also find these links in the video.
Tools used in this video:
Roughing Gouge: dehoutdraaierij.nl/shop/beite...
Spindle gouge: dehoutdraaierij.nl/en/shop/se...
Parting tool: dehoutdraaierij.nl/en/shop/ch...
Skew: dehoutdraaierij.nl/en/shop/se...
face shield: dehoutdraaierij.nl/en/shop/pe...
Folding ruler: dehoutdraaierij.nl/shop/overi...
Carving Jig: dehoutdraaierij.nl/shop/acces...
Treading kit: dehoutdraaierij.nl/shop/acces...
Music used in this video:
Stoned by Alexander Nakarada (CreatorChords) | creatorchords.com
Music promoted by www.free-stock-music.com
Creative Commons / Attribution 4.0 International (CC BY 4.0)
creativecommons.org/licenses/...
The music in this video comes from:
www.free-stock-music.com
www.bensound.com
Audionautix.com

Хобби

Опубликовано:

14 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 106

@radiovandijk 4 года назад

exotic wood is just wood that travelled a long way

@ronaldkanne 4 года назад

en zo is het! :-)

@Bunk599 7 месяцев назад

Whooee....that thread cutter is nice but more expensive than my first car! Maybe a Christmas present from someone who loves me very much?

@TheOtherGuybo 2 года назад

Love the interaction between you and your wife. Great mix of video and music. Thanks for your videos. I am learning lots.

@ronaldkanne 2 года назад

Hi Guy, I also love the interaction between me and my wife. I wish she could film as well as Lies! :-)

@garyhead577 10 месяцев назад

Its quite refreshing to watch you turn without a face mask or a faceshield. Great video. Just bought a threader..

@ronaldkanne 10 месяцев назад

Make some nice boxes with it! Good luck!

@jimneely4527 2 месяца назад

Sycamore is a beautiful wood! Thanks for showing off its beautiful grain in this project.

@stuartbruton48 3 месяца назад

Another smashing video. Always a pleasure to see you at work (play), many thanks 👍

@milmas100 Год назад

+++Najlepší je ten haf, haf haf. +++

@billkroulek3814 3 года назад

You sir are amazing at how easy you make everything look

@ronaldkanne 3 года назад

I'll take that as a compliment Bill, thank you! :-)

@henkderijk239 4 года назад

Ik vind hem weer prachtig ronald

@ronaldkanne 4 года назад

Dank je Henk!

@kendec1956 9 месяцев назад

Really enjoyed that!

@gregj2647 4 года назад

Great video, beautiful wood.

@HeckingtonArts 2 года назад

Thank you Ronald for a great demonstration of the Simon Hope thread cutting jig and a super job on the box. Terry

@GeraldJensen 4 года назад

Excellent video ... thank you! And a very nice shop also.

@ronaldkanne 4 года назад

Thank you Gerald!

@marcushaanstra4027 Год назад

ronald ik heb je gevolgd,in een woord geweldig .

@ronaldkanne Год назад

Nou... niet overdrijven Marcus! 🤣

@gerarddevoe8987 2 года назад

What a good teacher, and a pleasant helper Gerry

@ronaldkanne 2 года назад

What a good reaction and so pleasant to hear! :-) thank you Gerry!

@Makampedia 2 года назад

one more great video Ronald!

@ronaldkanne 2 года назад

Thank you!

@geertdemets1707 4 года назад

Verry nice explained

@georgecuyler7563 2 года назад

Thanks for explaining things as you go. Most of the Yankees that do wood turning feel the need to talk an hour for every thirty seconds of work they do. I love watching both you and Ashley Harwood. You both just get the work done.

@ronaldkanne 2 года назад

Well that is the first time somebody says to me: "I love watching both you and Ashley Harwood" Probably the last time also, so i enjoy this moment for a while...😊 thank you George!

@earlbishop2314 11 месяцев назад

I really enjoyed this video and the box is very beautiful! Your dog almost stole the show, so well behaved. Thanks so much for sharing your knowledge. A new subscriber from Canada.

@JohnRanderTournagesurBois 2 года назад

Thanks Ronald for an enjoyable video! I fully agree for the London plane. I was interested in seeing the Simon Hope jig in operation (that's how I found your video), and you gave me much more.

@ronaldkanne 2 года назад

Glad to hear that John! Thank you!

@andrewcharman9238 4 года назад

Thank you!

@ronaldkanne 3 года назад

you're welcome Andrew! :-)

@jarmstrong2843 Год назад

I just found your channel. Great video work, great wood turning, very instructional. You now have a new subscriber in East Texas, USA.

@fons68 4 года назад

Prachtig :)

@heinzhintermann1615 4 года назад

Hallo Ronald, es macht Spass dir bei deiner Arbeit zuschauen zu dürfen! Lieber Guss aus der Schweiz Heinz Hintermann

@ronaldkanne 4 года назад

Danke Heinz! Wann du sagst nächste Mal oval Gewinde sag ich dir schon: "Leider...Herr Hintermann" :-)

@berndj.3031 4 года назад

We are thinking of calling our "Easy Core" Ronald! :-)

@ronaldkanne 4 года назад

Well... you have my number... 😀

@DanieleBohrer 4 месяца назад

Adoro ver teus videos, obrigada, aprendendo a cada dia. Mesmo sem entender tudo que fala em inglês, mas dá pra entender pela prática!

@camilopenaarrieta9524 Год назад

Super hermoso

@robohippy 2 года назад

I thought that was one of the Chefware kit threading jigs, but looks like one you make yourself. I think I like your pop up better than the pivot. I am surprised when people make threaded boxes this big, especially in side/bowl grain. I took some threaded boxes from humid Oregon to central California, and some in the 1 1/2 inch diameter size would still open, but barely. I would expect wood movement to make that one move too much for threads to work.... I do love the quarter sawn plane/sycamore trees. Beautiful medullary rays in it!

@ronaldkanne 2 года назад

Thank you Robohippy. When you make threads you always have to add a little play. Also I used a fairly coarse thread to alow that play in crossgrain wood... but you have experienced that already...🙂

@ronaldkanne 2 года назад

Oh... and btw... the threading jig i used is made by Simon Hope...

@paulmelanson1527 Год назад

Great video, you have wonderful ideas. Where did you find that small light.

@ronaldkanne Год назад

Hi Paul, i found that light in my webshop...🙂 dehoutdraaierij.nl/shop/opruiming/magnetische-led-lamp-2/

@trevorhuntley8093 4 года назад

Excellent piece Ronald beautiful wood, I’m interested to know why you used 3.5mm pitch thread?

@ronaldkanne 4 года назад

Hi Trevor, the 3,5 pitch spindle was in the jig... That is why :-). But also for explaining I thought it was good to use a big pitch. I also have a 16 TPI and a 10 TPI spindle. If not for the video I would have chosen a 10 TPI iI think... Does that answer your question?

@trevorhuntley8093 4 года назад

@@ronaldkanne Yes, thank you

@woodfood1 Год назад

Great woork love it watching ,what kind of wax did you use please it looks amazing thanks

@ronaldkanne Год назад

Thank you Joey, the wax i used here was Woodwax 22 from Chestnut...

@petera.7204 3 года назад

Sehr, sehr schön. die Platane ist ein wunderschönes Holz, die Drechselnbank gefällt mir auch sehr gut, leider gibt es in Österreich keinen Robust Händler

@ronaldkanne 3 года назад

Hi Peter, Danke. In Europa gibt es Phil Irons in England und ich darf der Rest von Europa van Robust begeisteren...🙂

@woodbutcherjc 2 года назад

Nice work. Could you vacuum chuck it to take the bottom off?

@ronaldkanne 2 года назад

Sure you can!

@jackwebb8749 7 месяцев назад

I would love to know where you got the light that goes on your tool rest to shine into the box you were hollowing. Also the flexible dust hood. I'm really enjoying your videos. I've already subscribed to your channel. Thanks.

@jameswalt8118 3 месяца назад

Cindy Drozda.

@dondeere Год назад

the stick you combed your hair with lol

@dondeere Год назад

great job you dont over power with the music like a lot of them do and can i ask what you did with the stick

@ronaldkanne Год назад

Which stick do you mean Goodin?

@dondeere Год назад

the stick you combed your hair with lol@@ronaldkanne

@ronaldkanne Год назад

@@dondeere I lost it about 34 years ago...🤣

@lesterhall6347 Год назад

this a great video on box making. I would like to know where a person in the US can buy the Simon Hope Jig ? I have yet to find a source

@ronaldkanne Год назад

HI lester, I think Simon doesn't sell in the USA, but i'm sure there are other manufacterers making something like it that you'll like...

@kimspur 3 года назад

You made a side-grain box, Ronald. I have almost the same jig, and having serius trouble with threading a long grain box. The thread simply breaks, even with CA-glue. Have no problems with side-grain boxes. Could you demonstrate theading in a long-grain box ?

@ronaldkanne 3 года назад

Hi Kimspur, I will... one day... I can only guess what is going wrong of course... My first thought is make sure that the cutter is sharp, dense wood, light cuts... I'd say can't go wrong... :-)

@ukcarver 2 года назад

What happens to the fit of the lid when the wood moves after the wood drying out or the movement of the wood tension.

@ronaldkanne 2 года назад

The wood was dry when I made the box. That is important of course. Still, when the wood is completely dry it also will move a bit. So you have to count with that when you cut the thread... don't make it too tight...

@denniswee1785 6 месяцев назад

Hallo @Ronald. Geweldige filmpjes! Ben net begonnen met draaien en dit is erg leerzaam. Welke olie of wax smeer erop voordat je woodwax 22 erop doet? En is het niet mogelijk om met de beitels er schroefdraad in te zetten? Bedankt!!

@ronaldkanne 5 месяцев назад

Hoi Dennis, sorry voor mijn trage reactie. Zeker, dit kan ook met beitels. Schroefdraadstrelers noemen we ze. Het voordeel van zo'n freesje is dat het in praktisch alle houtsoorten kan. Bij strelen is dat wat lastiger. Strelers echter zijn wel weer veel goedkoper...

@denniswee1785 5 месяцев назад

@@ronaldkanne geeft niks! Inmiddels meerdere filmpjes van je gezien en ook waar die strelers gebruikt. Geweldige techniek!

@scottkrecker9995 7 месяцев назад

Where did you get the little light for the lathe

@ronaldkanne 7 месяцев назад

Hi Scott, they are on my website... dehoutdraaierij.nl/shop/opruiming/magnetische-led-lamp-2/#:~:text=Magnetische%20LED%20lamp%20voor%20op,zit%20een%20aan%2Fuit%20schakelaar. But if you are from America, this is probably not the answer you were looking for...

@nicholasguymer3471 Год назад

Do you ever use sanding sealer?

@ronaldkanne Год назад

Every now and then yes... but not specially with threads...

@davidbuchan2224 Год назад

Hi Ronald. So firstly thank you for allowing me into your family life for a very relaxing, enjoyable and informative 45 minutes. I am a beginner and have so many questions... but I will just ask one. As a beginner should I learn to thread chase before buying Simon's 'cheating' machine? It looks like some good (Crown or Sorby) thread chasers (16tpi) are going to cost around £150. Simons 'Complete Thread Kit' is an eye watering £495 - or around £350 if you didn't get all the bells and whistles. So... for a weekend turner who is fascinated by box making - learn to chase the thread or just dive in with the Ferrari? Also Ronald - On Simons demo of his thread jig he leaves his piece on the lathe and has his cutter is on the jig? The opposite to you? Why? Anyway, if you have time for an opinion on this (I sort of feel the same about chisels versus carbide cutters... but am sticking with chisels for the moment) I would be grateful. Thank you again.

@ronaldkanne Год назад

Hi David. If make boxes for fun xhoose for hand chasing. It is more difficult but once you get the hang of it it is much more fun, almost Zen to do.. althought there are some limitations (grain direction, wood type)... in my webshop i have the thread chasers from Jan Hovens. He knows what he is talking about and that shows in his thread chasers. The cost € 75,-/set. I think you are mistaken when you say that i do it the other way around then Simon... Grtz Ronald

@davidbuchan2224 Год назад

@@ronaldkanne You are completely right... you both do it the same way! In my defence we have had a pandemic, there's a small Russian psycho on the loose and the world generally seems f**ked... all of which I am blaming for my poor memory. I am heading to your website now! Thank you for your advice.

@davidbuchan2224 Год назад

@@ronaldkanne Sorry Ronald... what pitch would you recommend for a beginner - probably doing boxes of a similar (or smaller) size to your video. I need a relief scraper? And a hook tool?

@ronaldkanne Год назад

@@davidbuchan2224 i'd suggest 16 tpi for a start. Bigger teeth is way more difficult to start. A relief scraper you do need. But you can make it yourself also, and you only use it for 2 seconds... i never use the hook tool. Jan does, me never. It goes very well without...

@dieiuai-malebenselbstgebau1523 Год назад

Where did you get that little light from?

@ronaldkanne Год назад

I ordered them on my own website...🙂 dehoutdraaierij.nl/shop/opruiming/magnetische-led-lamp-2/

@StraightThread 2 года назад

Love your videos, Ronald! I'm curious about your folding ruler. How long is it and what brand is it?

@ronaldkanne 2 года назад

It is a typical Dutch thing. 1 meter long and made by Sola. We call it "Duimstok". :-) You can find it here: dehoutdraaierij.nl/shop/overig/meten/duimstok-1-meter/ (in Dutch...)

@gerarddevoe8987 Год назад

What type of collet do you use for your cutter ? Please My name is Gerry

@ronaldkanne Год назад

Hi Gerry, it is a colletchuck. dehoutdraaierij.nl/en/shop/accessories/alle-accessoires-en/collet-chuck/

@kaleygoode1681 2 месяца назад

Modern threads (on pill-bottles, for example) have 3 or 4 parallel threads, so that only a quarter turn will tightly fit the lid... Is there a way to achieve this with a jig like yours in wood? I'm asking because I have a very old similar ebony box with 3 threads and no idea how to do it!

@ronaldkanne 2 месяца назад

Hi Kaley, if you turn a lid a quarter turn it has 4 thread "entrances". If you use this tool, you make 1 entrance. So at least 1 turn must be made... hope that answers your question?

@kaleygoode1681 2 месяца назад

@@ronaldkanne I think so, so to cut 4 threads needs 4 cuts each having 4x the pitch... I must look into how the pitch is varied... and find a trick to get accurate quarter turn for the entries! I like a challenge...

@marykedykhuizen6902 8 месяцев назад

Where can I order that thread cutter?

@ronaldkanne 8 месяцев назад

Hi Mary, i must say I don't know if anybody is selling outside Europe... it is made by Simon Hope in the UK...

@protuberantius 2 года назад

Hallo Ronald, kannst Du eine Bezugsquelle angeben, wo man die magnetische Mini-Led, die Du an der Handauflage befestigst erhalten kann? Bin schon lange auf der Suche. Danke im Voraus Felix

@ronaldkanne 2 года назад

Hi Felix, Kann ich: dehoutdraaierij.nl/de/shop/sonstiges/beleuchtung/magnetische-led-lampe/

@protuberantius 2 года назад

@@ronaldkanne danke!! soeben bestellt!!

@ralphenlinda 4 года назад

8:41 wat is dat voor een lampje? Die is erg handig

@ronaldkanne 3 года назад

Hoi Ralph. Dat is deze: dehoutdraaierij.nl/shop/accessoires/alle-accessoires/magnetische-led-lamp-2/

@ralphenlinda 3 года назад

@@ronaldkanne Oh dat is handig om te weten, misschien is het een idee om dit soort dingen in de omschrijving te zetten, vooraal als het om hulpmiddelen gaat die jij ook verkoop op je website

@c.h.670 3 года назад

warum fräst du auf dem "rückweg", also entgegen der Laufrichtung des Fräsers und nicht auf dem Hinweg ?

@ronaldkanne 3 года назад

Es funktioniert besser, wenn sich der Fräser und das Holz in entgegengesetzte Richtungen drehen. Genau wie bei einem Router. Dann schieben Sie das Holz auch gegen die Drehrichtung des Fräsers ...

@c.h.670 3 года назад

@@ronaldkanne danke. ich habs bisher immer anders herum gemacht, ich probier es mal so aus.