No video :(

Brake Chamber Replacement

Подписаться 1,3 тыс.

Просмотров 154 тыс.

50% 1

***WARNING***SPRING BRAKE CHAMBERS CONTAIN A LOADED COMPRESSION SPRING. PROPERTY DAMAGE, SERIOUS INJURY OR DEATH MAY OCCUR IF MANUFACTURER INSTRUCTIONS ARE NOT FOLLOWED COMPLETELY.
NEVER attempt to remove a spring chamber crimped band.
Follow all industry safe maintenance practices!
In this video, I remove and replace a 30/30 Brake Chamber from an intermodal container chassis manufactured by Strick. I also disable the loaded compression spring using a specialized protective housing as to render this chamber harmless for disposal. Only qualified persons using such housing should perform this procedure.
**WARNING****DIESEL MAINTENANCE CAN BE EXTREMELY DANGEROUS This video is in NO WAY meant to replace proper instruction and/or training. This work was performed by a competent professional and was simply designed to provide a basic understanding of how a typical diesel shop operates.
Persons interested in the occupational field of Diesel Technician or Mechanic, are encouraged to enroll in the proper classes for certified instruction and training. Working in the field of diesel maintenance can be a challenging yet rewarding experience. I hope these videos give you better insight as to possible career opportunities.
All content copyright DieselMechTech 2014
Any music produced using GarageBand

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@dgronzega8073 2 года назад

Wow, 20+ years in fleet service and I've never seen a brake chamber cage. Awesome.

@Genztrucking Месяц назад

Makes me feel good that mine didn’t. Just thought I wasn’t lucky! Lol

@WaltB2823 3 месяца назад

This is a very old video and I'm seeing it for the 1st time but thank you so much. You made changing a chamber so easy and very great advice! ❤❤❤❤

@TylerTheFieldServiceTech 7 месяцев назад

You made a very good point about not just matching the old rod due to cut.....like most people do. Also when you get a bent pushrod that lazy copy the guy before method wont work. I usually mark a line and port with a marker so i dont mix the lines up

@joeg7755 7 месяцев назад

Very nice explanation and procedure! I noticed the bushing on the S-cam was worn, you can see that when you applied and released the brakes (around 4:20), S-cam shaft moving out of position.

@ViVA-MEXICO-AMLO 7 месяцев назад

Definitely wasn’t doing that before. Screw might got cut short I don’t know 🤷🏼‍♂️

@Aj-ro6uk 13 дней назад

Most mechanics dont bother to check the whole system,they fix whats obvious and move on.they don’t care

@danielprasad770 2 года назад

So You plug air in Remove the slack adjuster Plug air out Remove the 2 air lines And then remove mounting bolts

@gerardomorales1671 2 года назад

One of the best explained videos on how to mark and cut a brake chamber. Definitely like and subscribed. Thanks for making good content

@JakeNaughtFromStateFarm Год назад

I just did one of these today. I caged the brake chamber, then measured the length of the rod on the old one. I then cut it on the new one since it was already caged.

@Aj-ro6uk 13 дней назад

How did u screw the clevis to the rod?

@jfray3725 8 месяцев назад

Great job

@aayalaascream9696 3 года назад

Great Video very useful, appreciate your time to make it

@colby7505 Год назад

Figured I’d re check this out since I hat one hit me in the face today left a pretty good notch in my cheek

@johnysilver1853 2 года назад

Finally good proper video

@Aj-ro6uk Год назад

Whats a slack adjuster gauge?

@omchunter6988 10 лет назад

Great video! I love watching all of your mechanical videos and I must say they really help me a lot!

@DieselMechTech 10 лет назад

Thanks! I'll be doing my best to keep them coming

@omchunter6988 10 лет назад

Glad to hear this! I hope you can do a lot more man.

@jharley6603 2 года назад

Good and very easy to follow video, Appreciate your time.

@darylcjackson 10 лет назад

Really Good Vid! Lots of info, well presented and excellent video quality. THANKS

@DieselMechTech 10 лет назад

Thanks again. I'll try and keep them coming

@user-jb6hl5se8l 9 месяцев назад

Just had one explode right in front of my face today , scared the shit outta me

@RV83313 4 месяца назад

U were taking it apart or something for it to explode? Bec I’ve changed a hell of a lot brake cans and the only one that came apart and bit me was the one that my dumb a** was trying to take apart bec I cut the rod to short. So I figured that I would swap the old rod out of the old brake can and put it into the new one since I was an idiot and cut it to short. Needless to say it came apart and hit me in the gut and knocked my wind out lol. I was really young whenever that had happened, my first brake can swap and I learned a valuable lesson that day… I still can’t believe that I was that dumb lol

@user-jb6hl5se8l 4 месяца назад

@@RV83313 diaphragm was leaking and it was rusted to hell so we decided to replace the whole thing and the old guy I work with always likes to take them off off and put air to it with a pipe fitting to extend the push rod out and right when it got pushed all the way out it blew apart and blew a hole in the ceiling 20 foot above us, my face was about 10 inches away from it and I felt the air from it go by my face

@routerider9542 9 месяцев назад

Nicely Done.

@hishembuabsa700 10 лет назад

magnifique travail

@johnricciojr.5324 4 месяца назад

Excellent

@Overkill14 11 месяцев назад

Christ I had to watch this video again after the peterbilt frame stretch series to remember how bad this was. If this whole fiasco isn’t a testimony to your character I don’t know what is.

@Welkome.Alienz Год назад

Is that a container ocean trailer?

@alexgame-autos343 10 месяцев назад

Sound stupid but how do you remove air from chamber once slack adjuster is off?

@gurvinder849 4 месяца назад

The airlines are still on

@rushwhit Год назад

How do you clock a chamber like that?

@barakathaider6333 3 года назад

Great video

@kellykolnes1954 2 года назад

Great video!!

@importsstillsuck 10 лет назад

if possible could you show a video on just replacing the piggy back?

@vicpetrishak7705 Год назад

There are some of them spring brake chambers still in service but it is never recommended to do that procedure ! Stay safe ! 110/23

@importsstillsuck Год назад

@@vicpetrishak7705 been doing that for years...8 years it seems. Only did the whole chamber if it was necessary, otherwise I only did piggybacks.

@vicpetrishak7705 Год назад

@@importsstillsuck I was referring to the spring brake chamber itself . Caging the old style to replace the diaphragm in the spring side is not safe to do. All the late style chambers roll form instead of a clamp. There are still some of the old style in use .

@importsstillsuck Год назад

@@vicpetrishak7705 I'm referring to the piggy back not the diaphragm and whenever we came across a sealed type brake chamber that was broken, we'd replace it with the serviceable type with the clamp.

@Tumle25 10 лет назад

Cool video :D Replace a Brake Camber is not that hard :D You can do it in an easier way. Take the old Camber, measure the length, lets say it was 24,8 cm. Then you mark 24,8 at the new one, cut whit tha grinder, mount the new one and attach it to the rest. Then you have more space to cut instead of do it under the trailer or were you are replacing ti from ;)

@DieselMechTech 10 лет назад

Just as a rule, I never trust the length of the previous rod as the measurement of the new rod. I've had to replace a newly installed brake chamber which was improperly cut on a road repair. The new chamber rod had been cut too short and did not function properly.

@Tumle25 10 лет назад

DieselMechTech ohh okay, that could my workplace lern from :D

@hook86 Год назад

Exercising extreme caution would be CAGING the chambers before fuckin with them!

@PuppyPunter262 Год назад

These videos need to be filtered off of RU-vid. This one stays tho. Even accuride did it wrong😂

@nickcassamajor3817 Месяц назад

Great job

@breckmcclue7739 Год назад

How did you get the clevis off?

@RV83313 4 месяца назад

Usually have to get a torch and heat it up to be able to unscrew it off, bec they’re usually frozen. I put a little bit of anti seize on the threads whenever I put them back together