Wow!! I don't think I've ever seen so much mechanical beauty. That old engine is huge, the injector lines are massive. So cool thank you for sharing this 🙂
Congratulations on restoring the tug.She looks awesome . Sailed on a few ships where the BP was used to power the Generator sets.Had a few scavenge fires with them . Also sailed on Stephenson Clarkes Pulborough which had a BP as a main engine.
Nice to see the old girl still going. I used to drive that engine when I was second engineer with Caledonian towage when she was based in Invergordon, along with her big sisters the Kenley and the Kestrel. Had 1 or 2 hairy moments on her when she was up in Scapa flow Orkney.
Ha it made me smile to see all those people in the engine room starting her up, in the mid 1980s I used to have to go aboard her in the winter in the dark and cold and get her running on my own, but that was how it was in those days,and as for the comments on the port side radiator cooled set that was the only heating that we had in the winter,and we kept the after cabin hatch open in the summer to get a supply of cool air to it.
A few years ago, I had worked on a tug owned by Purvis Marine in Sault Ste. Marie, Ontario named the "Avenger IV". The Avenger IV was built by Cochrane and Sons of Selby, England for William Watkins Ltd. and has been owned by the Elliot Steam Tug Co. and the Alexandra Towing Co. She has worked on the coast of Europe and Great Britain and also the Thames River. She was purchased by Purvis Marine Ltd. in 1985 and was sailed to Canada during the fall and early winter of the same year. She has a 9 cyl. British Polar engine just like the one in the video and is still used today to transport steel products all over the Great Lakes by barge. I always slept well when we were underway...to the sound of the old Polar! Miss her terribly!
Chris McKeachnie I was an apprentice draughtsman at Cochranes in the 1970s . We were still using British Polar engines in some applications. Cochranes turned out some superb vessels of all kinds until the place closed in 1992. It was situated in a dump of a town called Selby about 15 miles from York. I remember as an apprentice, being told to throw out all the drawings of ships before a certain date. I suspect the Avenger drawings would have been among them. The ships were launched sideways into the river Ouse, which ran into the Humber.
Great to see this beautifully restored tug and engine.My memories are not so good about Polar engines on one ship the polar 9 cylinder engines were on the generators . Had a tendency to lose the scavenge piston then runaway. Quick run on to the platform to slow it down and stop. Used to upset the deck crew when working cargo with winches to suddenly lose power !
Good to see matey. I didnt realise the Kent was that deep.. we share same marina! There was an old Sun tug Vanquisher that ran a polar shade bigger than this suspect.. nice resto.
Ever since I saw you in photon's vid about this engine I was really looking forward to hearing her run. She sounds lovely. Thanks for uploading, it's a very nice video. I am fasinated by this sort of thing.
There is something majestic about the mass and sound of a big engine loping along. Much like an aged relative being cared for by devoted family members here every need is seen to in a timely and proper manner.
Love the sounds.it brings back memories. Collenberg engine in a tug. Run the pony moter to charge up the air tank. Then let the air start the engine. Just love it. thanks for posting this video. A+ my man...
I'm US and I remind people here how British Ind. design led for 100 years or more 'Deltec Diesel a good example' and now we follow others (China, Japan etc.) in industry and lead only in com/tel/teck. marketing and ( litigation, a new science)
I love these proper engines, I have an old Kelvin T8 that I hope to get running again, what worries me is that if I'm sat at anchor, and it starts to drag, how quick can we get the engines up and running to sort it out? I have to go down the hatch to start the engine which at least means it's checked before anyone tries to start it, oil is primed, sea cock turned on etc. Yes we check our weather and anchor in a suitable place but shoot happens!
i m chief engineer from Spain i see the picture is very intereting for my the engine room the tug is old bat very beatifully and it perfect conditions for the working thanks brothers seamen . Excusme for my englis is not good
Hey Carlos, I love the sound of old (slow turning) engines and in my ship I have an engine that I even used as a musical instrument. Check out the videoclip "Ship's engine song" on my channel and you'll know what I mean. As a chief engineer you might love this.
Excellent restoration - a "hardware enthusiast's" idea of heaven (even down to the polished injection lines!). Filmed by "The Crazy from Dartford" - Mr Photon himself (I'm surprised he hasn't "popped it!") :-D
gaselee tugs were mostly polar engines along with knights tugs, tayra and rana had same 5 cyl polar rated at 700hp or around that mark from ex gaselee engineer the good old days nice to hear that sound again
hi paul, thanks for your reply yes I do recall barney, other names that I know where bert keen,(rana) jack coborough(tayra) sam wellar (culex) George coward (mamba) he must have known the skippers alec rickets and his dad also the miller brothers skippers of (aboma naja) ect etc most of them gone but not forgotten my best den
This was filmed seven years ago, and I hope that the videographer has learned to slow down the panning. Not only does it cause the viewer some dizziness but it makes it impossible to determine what structure is being seen. As this is an entertaining, educational, and historical video about a clean and well maintained older vessel, and it generally covers its subject well (starting the marine engine) I hope my criticism is taken as intended; that is, to improve similar future videos.
a tug must have a good bollard pull by putting a line from the tug to the dockside you can get a reading of how hard it can pull and now there are so many engines you have gearboxes , new propulsion systems the lot regards paul
Question. Since the main engine is direct drive, was it easy to go astern from ahead at a decent speed? Was the air start system able to overcome the force of the water flowing over the propeller at speed in order to change engine direction? Magnificent restoration by the by.
No problems for a direct drive, but to transit from ahead to astern or vice versa, you need to get to dead slow speed then astern / ahead, to reduce wear and tear.
Aftershock2013 the main engine is the only one with a propeller and its 7ft in diameter if you want to try it your more that welcome by the way its direct drive so you would be turning that over as well .
It would be really nice to know just what needed doing to that superb engine during it's overhaul. I have a feeling the old lady didn't need a great deal. Rather like a monstrous Lister. I'm sure it will still be around when us mere mortals are dust.
Yes very strange to have a radiator cooled generator in an engine room after a couple of hours working the engine room will be a furnace. It is not normal practice!!
Marine engine are on a whole other level to land ones. "Good day, good Sir, would you perchance have designs for a motorised device capable of propelling a building?"
Pretty sure the funnel bung is a plug or stopper that seals the smoke stack(funnel) to the outside. Keeps rain,snow or even critters from coming down the exhaust. Either that or it's the boats butthole.
douro20, I think you will find this is a British Polar 2-stroke engine. If you look at the cylinder heads there is no rocker gear. This means that the combustion gasses are delivered and disposed of by loop scavenging.
Absolutely wonderful...I wish I was a member of your society...! Always loved old nautical motors...The interior of the KENT engine room shows so much loving attention to detail...(ie: 'FUNNEL BUNG IN/OUT' sign!!). So, what type of engine is the auxiliary that is started first? I also noted that it is radiator-cooled...very interesting! Here is a steam tug in Toronto that I would love to see restored to functionality. en.wikipedia.org/wiki/Ned_Hanlan_%28tugboat%29 If you were in the United States - here is another historic tug that needs to be saved: www.duluthnewstribune.com/content/tale-twin-ports-man-boat-tug-heartstrings cheers! - B in Toronto
