Nice video and workplace there! Intrested I’m the mechanics of these pcps! May have to get a cheap one to play with would worry touching my fx without any experience decent watch tho!
Just watched your video really good ive got a brocock compatto and its loosing all air ive had the regulator changed and soon as i filled it dumped all the air out any ideas on a fix many thanks again and look forward to hearing from you
I've had the bolt on my Concept S6 jam in a way where you could not pull it back and put the bolt in the safty slot. It also will not shoot, like the trigger does not engage. I happed when the clip was stuck from rotation due to a pellet skirt catching. Not sure how to fix it or why it has happened twice. First time sent it out under warranty repair. Now its off warranty and it happened again. Do I need to drain the gun to work on the bolt?
Not looking for a total strip down but need help ,my nephews s6 has drastically lost power and we are un aware why ?? If you can point me in the right direction or give me a clue what an how I need to look for ,ie trouble shooting, be greatly appreciated.
@@airrifletech8085 how do I go about that? Its alien to me this gun, I own a hw100 and I have resealed that etc but I don't like going in blind , but I can't find what im looking for anywhere? Any help would be extremely appreciated and I thank you for the tip re grub screw but were is it?
@@airrifletech8085 yes mate I did but I watched loads of RU-vid on it and also have a airrifle mag with the gun stripped. Which I went over and over an over, a lot. This one I'm blind as can really find much trouble shooting etc on my nephews. 👍
Could you please help me out, any idea why my nephews brockok super 6 has lost power ,,it pushes the pellets out really weakly ??? Any help be greatly appreciated. It doesn't leak air ,but even full it has lost power , it is under the 12lb limit.
Could be many things, check the pellet probe seal, sticky valve, incorrect hammer tension settings, weak spring, transfer port partcly blocked. At full pressure it can be weaker then say at 150bar.
