Тёмный

Broken Amp No Sound? Use a DIY Signal Tracer 

Al Young
Подписаться 403
Просмотров 11 тыс.
50% 1

In todays video I show you how to use a guitar amp signal tracer tool that I built for finding faults and failing components in broken guitar pedal and amp circuits with no sound. Using an audio signal tracer can help make a complicated circuit problem a lot easier to find and you can easily build one yourself with simple parts from home. If your amp or pedal is powering on but no sound, then this diy audio circuit probe tool can make the job quick and easy to figure out.
👇Check out this video to see how to build this simple DIY tool👇
• Build An Audio Signal ...
(Amazon Affiliate)
------------------------------------------------------------
👇.1uf - 600v Capacitor (104)👇
geni.us/104cap (amzn)
------------------------------------------------------------
My name is Al. The goal of my channel is to help the DIY musician learn how to fix, modify, and get to know as much about the guitar as possible. I will focus on how-to tutorials, musician tips, tricks, and DIY projects. To help save your time, and money. Allowing you to focus on what is important…..
the music!
-------------------------------------------------------------
🤞Subscribe to the channel
/ @alyoung
-------------------------------------------------------------
Affordable DIY tool kits to get you started
👉Multi Tool: geni.us/guitartool (amzn)
👉Guitar Setup Kit: geni.us/setupkit (amzn)
👉Soldering Kit: geni.us/solderkit (amzn)
👉Multimeter: geni.us/mmeter (amzn)
-------------------------------------------------------------
Video/Audio Gear I Use
👉Lighting: geni.us/budgetlightingkit (amzn)
👉Camera: geni.us/11promax256 (amzn)
👉Audio:geni.us/Presonus96 (amzn)
**Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you!!
**Warning! Electronics and audio circuits can contain lethal, high voltages.
This video is for entertainment purposes only. Never try this project at home. This video is not intended for education purposes. Always do your own research before attempting any electronic project. Any attemp at this project will be strictly at your own risk.
Thank you for Supporting my Channel!!

Видеоклипы

Опубликовано:

 

6 июн 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 18   
@AlYoung
@AlYoung 5 месяцев назад
Become part of the community and subscribe Today! ru-vid.com/show-UCyGmX3E6i6Fo8Ym6uAb65ZA
@ssgeek4515
@ssgeek4515 Год назад
Great video.I made a probe with a pen case and a cap with a copper nail as the probe part. You have prompted me to look at my friends Heathkit receiver with schematic.we shall see.....☺
@MrNewRevolutionaries
@MrNewRevolutionaries 2 года назад
Very cool dude! Simple but genious.
@AlYoung
@AlYoung 2 года назад
Thanks man! I appreciate that! It’s definitely easier to use then chasing mA voltages. Once the problem has been detected then the multimeter and transistor tester can do the rest of the deep diving.
@joeantonissen3986
@joeantonissen3986 2 года назад
Well done buddy pretty cool tbh man
@AlYoung
@AlYoung 2 года назад
Thanks Brother!!
@knightwar3
@knightwar3 Год назад
I came from the first video nice demonstration i have some polyester and ceramic caps rated at 1KV but with low capacitance 0.001uF and 0.002uF and one polyester capacitor rated at 400V 0.047uF i will try different ones on the probe and see the result
@AlYoung
@AlYoung Год назад
Thanks for watching my videos! I have had good results with the .1 uf cap. So far it’s held up well and protected the tester amp with no problems. Next I would like to build a capacitor discharge probe.
@z80softcard
@z80softcard 7 месяцев назад
Good Idea. Thankyou.
@AlYoung
@AlYoung 7 месяцев назад
You are most welcome!
@Truly5Blessed
@Truly5Blessed Год назад
Very cool
@AlYoung
@AlYoung Год назад
Thanks Kevin!
@alphanuevo
@alphanuevo 6 месяцев назад
Thanks. I put together a similar probe after watching this video (small headphone amp with spliced RCA cable with the positive lead connected to capacitor and alligator wires for both; used an Android signal generator app also). Anything specific to watch out for when tracing eyelet board pedal builds? I have more parts coming today. The bypass for my build works fine but no signal from any part of the eyelet board. Have a good one.
@AlYoung
@AlYoung 6 месяцев назад
I don’t think it will hurt anything poking around on a pedal circuit. I would start by probing the input signal. Then follow the signal path until you loose it and possibly take some voltage readings in the area of trouble. Hopefully it will be something simple like a backwards capacitor or crossed wiring.
@alphanuevo
@alphanuevo 6 месяцев назад
@@AlYoung Ok, I'll give that a shot. Thanks!
@craigheavner8254
@craigheavner8254 8 месяцев назад
How do you apply it to an amp, not through a pedal?
@AlYoung
@AlYoung 7 месяцев назад
That is a valid question given the title. I built it to test mainly amp circuits and thought it would be easy to show how it works on a simple pedal circuit. I will make a video showing how to use it on an amp coming up soon.
@tinkerman9224
@tinkerman9224 Год назад
I've built a signal tracer & burned 2 little amps because I believe an impedance mismatch. So I incorporated a transformer to correct the impedance. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ML1-LNIwwVc.html
Далее
Она Может Остановить Дождь 😱
00:20
This Stop Motion is Insane
00:39
Просмотров 8 млн
Получилось у Миланы?😂
00:13
Просмотров 867 тыс.
Ultimate Floyd Rose Sustain Block Upgrade
10:22
Просмотров 1,1 тыс.
Build An Audio Signal Tracer
10:58
Просмотров 12 тыс.
Guitar Pedal Fault Diagnosing - Audio Probe
4:46
Просмотров 22 тыс.
Miyagi & Эндшпиль - RudeBoys (Official Audio)
3:16
MACAN, A.V.G - Привыкаю
2:55
Просмотров 364 тыс.
СЛОТ - С.М.Г.О.  (Official Music Video)
4:01
Просмотров 102 тыс.
JJAM
3:06
Просмотров 2,4 млн