Hello, Below you have timestamp references for easy access or orientation through the video. There is also a copy of these in the description part as well. 😉 So how do then these work ? 🙄 www.minds.com/newsfeed/827329309057310720 Video Breakdown: @ 00:00 - 02:11 -- Intro/Announcement @ 02:12 - 03:06 -- Note On Organisation Of The Video @ 03:07 - 03:42 -- Story On How I Got This Appliance @ 03:43 - 04:29 -- How I Usually Approach "Dumpster Diving" Finds @ 04:30 - 08:42 -- Troubleshooting The Issues Of The Fault (Cleaning) @ 08:43 - 10:12 -- First Test (Demonstration On The (Audible) Fault) @ 10:13 - 10:30 -- Announcement On Further Steps @ 10:31 - 13:03 -- Ironing Unit From a Couple Of Angles (Close Up - With Some Commentary) @ 13:04 - 13:56 -- Starting The Teardown/Disassembly @ 13:57 - 15:52 -- Taking The Appliance Apart (Side Panels Removed) @ 15:53 - 16:22 -- Top & Bottom Plastic Housing Separated @ 16:23 - 18:27 -- First Glance At The Insides (Back, Intake) @ 18:28 - 19:30 -- Some Commentary On How The Unit Works @ 19:31 - 19:58 -- Removing The Input Power Cable @ 19:59 - 20:44 -- Control Panel Commentary @ 20:45 - 21:13 -- Mid-Video Disclaimer On Recording @ 21:14 - 22:17 -- Control Panel Wiring & Detaching @ 22:18 - 22:38 -- Bare Control Panel Plastic (With Secondary PCB) @ 22:39 - 23:29 -- Secondary PCB More Up Close @ 23:30 - 24:01 -- Work Plan For The Future Steps @ 24:02 - 24:20 -- Some Overview On The Rest Of The Parts @ 24:21 - 25:54 -- How To Remove The Main Hose Line (With Cablework) @ 25:55 - 27:03 -- Unclipping The Hose-Cablework @ 27:04 - 30:04 -- Commentary On The Wiring (Going On & Off The Main PCB) @ 30:05 - 31:14 -- Primary PCB More Up Close With Commentary @ 31:15 - 32:37 -- Removing The Sucking Electromagnet @ 32:38 - 35:38 -- Note On Extracting The Boiler Chamber & Commentary @ 35:39 - 36:12 -- Info On Further Steps (Reassembly & Mid Test) @ 36:13 - 37:42 -- Another Test Of The Appliance (Steam Visible Too) @ 37:43 - 40:12 -- Analysis Of The Fault & Ideas On The Fix @ 40:13 - 40:35 -- Overture For The Last Teardown @ 40:36 - 42:24 -- Partial Disassembly Of The Detachable HotPlate @ 42:25 - 43:34 -- Conclusion & Summary @ 43:35 - 44:34 -- Final Thoughts
16:50 I have steam coming out of the feedback hose. Do you know what would cause this please? Sorry, having finished watching the video, i think my problem is the same as in your video.
Hi, Ufff... I have no idea honestly. Could be the valve (electromagnet) not working correctly. And this perhaps is being caused by the calc buildup in the heating chamber itself. Thus the sensors not sending the correct information back to the main board. I don't know. 😕🤔 Did you disconnect all the hoses & cleaned them up ? Best Regards, David
@davidbolha the solenoid on our machine was removable, however we were unable to source a new part. We gave it a few smacks, refitted it, and so far, the iron is working fine 🙂
Hi, I sold the unit pretty much the next day when this video was recorded so sadly I can't help you out. 🙄😶😕 Did you clean the heating chamber, check the tubing & clear the holes on the hotplate itself (the surface beneath) ? You could like try using a toothpick to unclog the openings... If they are like filled with calc in the first place. 🤔😊 Best Regards,
@@davidbolha hey mate got updates... The heater metal ball not working .... That is end of the road for this iron .... People stay away from this iron ...