We have a Brother 791 that seems exactly the same. It's been a while since I last threaded it, so I got the first tensioner wrong, but thanks to you, it's now sewing like after I fixed it!
I just bought a Brother Boutique 751 at a yard sale and couldn't find a user manual. I don't have much maintenance experience with sewing machines so I was so happy to find your video on RU-vid. Not only did you show me the problem so that I could fix it, you also explained maintenance which was a plus! Thank you!!
Omg...Thanks so much I have a Jones 771 machine inherited from my mother hadn't a clue how to thread it watch uour video sane threading pattern help immensely. Thanks a million ⭐️⭐️⭐️⭐️⭐️
Hi, I just used W5- 20 engine on my sewing machine and it is so quiet now and it runs like a dream, but use a needle nose squeezer and go easy a few drops goes a long way.
Hi, I just acquired a Brother 781 sewing machine from a friend. It looks like it needs maintenance but I'm not able to find any instruction/ user manuals for it. Please, can you help with some pointers on where to find the manuals, use and maintenance? thank you!
Referring to 7:53 "I have to make sure it's gonna come out like this": My manual explicitly shows that the bobbin has to be put in the other way around, i. e. with the thread pointing away from you, to the right when looking at it sideways, then pulling it back through the slit. Feels a bit counterintuitive, but there it is...
I believe the bobbin thread should be coming off counterclockwise (that should be to the right as you said) I very well might have had it backwards, it doesn’t ever seem to be a deal breaker if I get it in wrong.
Wonderful video! I just bought this at a barn sale for $19. I haven't tried it out yet. The lady I purchased it from said it works, but runs slow. Any ideas on how to fix it? Thank you.
I have the 431 and I cannot get the clutch knob to loosen up so I can wind the Bobbin. I’ve put wd-40 in the area and used a hair dryer but it hasn’t given yet. Any suggestions?
I forgot to also mention that I cannot get the little white button for darning to loosen up. The turning knob to change from straight stitch to zigzag is also stuck. Apparently the machine must’ve sat idle for awhile. I guess it’s just gonna take a lot of patience, oiling and heating. any other suggestions would be appreciated.
Hi i have a similar model that was given to me so no Manuel or info at all. It has a few more stitch patterns . It ran great for a short time . But now bobbin thread continually breaks or upper thread tangles around bobbin assembly immediately on start. Any suggestions?
That could be a couple of things - the tension could be off, or the timing could be off. Make sure you have good quality thread, threaded correctly, and try adjusting the tension (both on the bobbin and the upper tension). If this doesn’t help you may have a timing issue.
I believe the satin stitch would be wide and short, so adjust the width until it’s the width you’re looking for, and shorten the length to almost nothing.