Тёмный

Bruder Arocs Tractor Complete conversion - real time 

RC-BruderBaustelle - Florian Bader - Modellbau
Подписаться 5 тыс.
Просмотров 39 тыс.
50% 1

Real-time conversion of an MB Arocs as a 3-axle semitrailer tractor.
The video is not accelerated. The whole conversion takes 1:45 hours to the ready to drive model. This time even incl. The soldering at the Elektornik!
Unfortunately, in between once the camera for about 3 minutes failed.
During this time I clicked on the drive axle, inserted the two aluminum angles. The steering servo was provisionally packed in the hole hammered out, the front wheels pierced with a 5mm drill and the brass bushes hammered. The two steering axle halves, I have only stuck in the lazy block with the protruding screws to find the center position for the lazy block.
Since the video is correspondingly long this time a few markers for "seekers".
* Start of reconstruction at: 3:40
* Frame drive & control Front axle express at: 5:00
* Insert rear axle, rework 28:00
* o.g. Install camera failure or continue with steering axle at: 33:00
* Install the wheel adapter in the tires at: 56:30
* Electronic installation at: 1:13:00
* Ready to drive at: 1:40:00
To answer many e-mails up front, here is a list of tools and components used.
Further information can be found as always on www.RC-Bruderbaustelle.de
Tools:
- Dremel with wave amzn.to/2COje6Q
- Router set amzn.to/2COMpH0
- Plastic cutting disc amzn.to/2CMc0Al
- Metal cutting disc amzn.to/2RlAUe7
- Knippex Forceps amzn.to/2CT0d3l
- Cordless screwdriver small amzn.to/2RpgWiB
- Cordless screwdriver big amzn.to/2yFwqbp
- Tin snips amzn.to/2CQD9Cb
- Sheathing tool amzn.to/2StGigq
- Hot glue gun amzn.to/2RqQl4R
- Hot air gun amzn.to/2RroCkt
- soldering iron Weller (alternatively: amzn.to/2CNmj7b)
Installed components:
- Brother Arocs Cabin amzn.to/2yJN49A
- Brother MAN TGS chassis amzn.to/2Db3z2j
- 3D pendulum axle Sigi-Sorglos in low execution (www.rc-bruderba...)
- Radadapter Set (www.rc-bruderba...)
- Vario steering axle Susi-Sorglos (www.rc-bruderba...)
- Lazy block
- You can find electronics here: www.rc-bruderba...
- Modeling controller
- steering servo
- U-BEC module
- Remote Control Flysky FS-i6 amzn.to/2DcQHJ5
- Battery Zippy 1000 mAH 3S amzn.to/2StKaxY

Опубликовано:

 

11 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 21   
@RCModders
@RCModders 5 лет назад
Hello and apologies for writing in English (I do not know any German and do not trust Google Translate!). Andi at AC Bruder Spares told me about your channel and website today and I have just started looking at your impressive Bruder developments. I was surprised how similar our transmission solutions are - although I do not have the clever rocking mechanism. I think that it is great that you share your insights, I try to do the same - in order to help others enjoy this great hobby. Excellent video! 🙂👍
@lyjukaloletty7093
@lyjukaloletty7093 4 года назад
Amigo este video era justo lo que estaba buscando ..!! muchas gracias me sirvió de mucho sigue compartiendo tus trabajos saludos!!
@potshot111
@potshot111 4 года назад
Ray good looking truck and a lot of hard work to sort it out.
@florinvatafu
@florinvatafu 4 года назад
Congratulations . Very good, I like what you do.Respect from me.Florin
@martinsbruderworldgamerchannel
MB Arocs Sattelzugmaschine deine eigene BRUDER Neuheit
@carbonarne675
@carbonarne675 5 лет назад
Geil, das gefällt mir!
@ludwigwenigwieser6630
@ludwigwenigwieser6630 5 лет назад
BonCarbon4U ghz
@deutzdeutz1994
@deutzdeutz1994 5 лет назад
Nice .10 Aufruf 3 Like ist von mir
@alfredtetzlaff7764
@alfredtetzlaff7764 4 года назад
Da wird aber mit viel Liebe und Sorgfalt gearbeitet...
@thatsmyrc
@thatsmyrc 5 лет назад
😁😎👍🏼
@crawlstockrc
@crawlstockrc 2 года назад
Hi, where can you purchase the parts to make the drive axles please?
@rc-bruderbaustelle-florian8916
@rc-bruderbaustelle-florian8916 2 года назад
Hi, you can get the axles on my site
@airsofteis9924
@airsofteis9924 5 лет назад
Hi ehm weist du wie man den Sprinter am besten zerlegt ?
@isaiasmarquesferreiraferreira
@isaiasmarquesferreiraferreira 5 лет назад
hallo wie geht es dir, wo kaufst du die motoren und die teile, um die rückseite daraus zu machen? und auch die Verankerungen der Räder,
@rc-bruderbaustelle-florian8916
Die Bausätze findest du alle auf meiner Seite: www.RC-BruderBaustelle.de
@Cristina-nt1ws
@Cristina-nt1ws 2 года назад
que pena no ser en español ,gracias
@Holzarbeiten_STIHL-echt
@Holzarbeiten_STIHL-echt 4 года назад
Hi, wie viel hat der umbau insgesamt ungefähr gekostet, mit allem was man braucht ? LiG Leo :)
@rc-bruderbaustelle-florian8916
@rc-bruderbaustelle-florian8916 4 года назад
Hi, die Bausätze und Teile findest du alle auf meiner Seite: www.RC-Bruderbaustelle.de bzw. mir eine E-mail schreiben. Viele Grüße P.S. Der Arocs steht aktuell auch so wie er ist zum Verkauf...
@Holzarbeiten_STIHL-echt
@Holzarbeiten_STIHL-echt 4 года назад
@@rc-bruderbaustelle-florian8916 cool, was soll der kosten ??? :)
@rc-bruderbaustelle-florian8916
@rc-bruderbaustelle-florian8916 4 года назад
@@Holzarbeiten_STIHL-echt Verkauf ich gerade bei #eBayKleinanzeigen. Wie findest du das? www.ebay-kleinanzeigen.de/s-anzeige/bruder-arocs-sattel-fahrfertiger-rc-umbau/1203567880-249-7630?
@florianleitner1815
@florianleitner1815 4 года назад
Actros!
Далее
VOLVO A60H Dumper SCHWERTRANSPORT Bruder RC Umbau!
6:47
Sigma Girl Pizza #funny #memes #comedy
00:14
Просмотров 2,3 млн
Decompress small game, have time to play it!
00:35
Как подписать? 😂 #shorts
00:10
Просмотров 454 тыс.
tuto Remorque porte engin RC de MCD
17:51
Просмотров 193 тыс.
Bruder RC conversion with servo only
7:05
Просмотров 13 тыс.
How does a VCR work?
15:00
Просмотров 6 млн
Sigma Girl Pizza #funny #memes #comedy
00:14
Просмотров 2,3 млн