No video :(

BTT Pi Board (An Alternative To RASPBERRY PI ) - Overview & Installation Guide

Подписаться 42 тыс.

Просмотров 25 тыс.

50% 1

Hi guys 🙂
With the Klipper fans growing and the shortage of Raspberry Pi boards, users are trying to find different solutions.
Meanwhile, some 3D printing manufacturers are making alternative solutions for the Raspberry Pi boards.
So, in this video, we will check one of Bigtreetech's solution, the BTT Pi version 1.2.
Here you can find out all about this new board and how to start using Klipper with it.
♦ You can find the BIGTREETECH BTT Pi V1.2 here (Not Affiliate Link):
biqu.equipment...
🔶🔶🔶 If you like our work and want to help the channel, you can contribute using one of the following...
🔶 PATREON:
/ ruiraptor
🔶 PAYPAL:
Use our email to send your donation ( ruiraptor.channel@gmail.com )
🔶 You can also help by using our Banggood affiliate links posted below (costs you nothing and you are contributing to the channel):
You don't have to buy the item from the link. If you click on them and then buy whatever you are looking for works!
♦ Ender 3 V2
pt.banggood.co...
♦ Creality Ender 3
pt.banggood.co...
♦ Creality Ender 3 Pro
pt.banggood.co...
♦ Creality Ender 5
pt.banggood.co...
♦ Creality Ender 5 Pro
pt.banggood.co...
♦ Creality Ender 5 Plus
pt.banggood.co...
♦ Creality Ender 3 Max
pt.banggood.co...
♦ SKR Mini V2.0:
pt.banggood.co...
♦ Artillery Hornet
pt.banggood.co...
♦ Artillery Sidewinder X1
pt.banggood.co...
♦ Artillery Genius
pt.banggood.co...
♦ Creality CR6
pt.banggood.co...
Thank you so much for your support 😉
🔶FOLLOW US ON SOCIAL MEDIA:
♦ / ruiraptor
♦ / ruiraptor
♦ / ruiraptor
Music by RU-vid Library:
Palace of Roses - Aakash Gandhi
#Klipper #RaspberryPi #Bigtreetech

Опубликовано:

23 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@TamasJantyik Год назад

I have a cb1 and works really well. I ordered and now have one of these, too. It is much more practical than the cb1, unless you have a manta board... It does not need any/much cooling. It stays between 45-60 celsius. (open air, not inside in a case/printer)

@jericsm Год назад

Thanks for this, actually helped me decide between an orange pi or btt pi, i chose the btt pi. do you have setup instructions for the adxl345 on the btt pi? i can't get mine to work.

@InFamousStickFigure 8 месяцев назад

Awesome video, thank you for this. I'm in the final part of configuring my V2.4r2. And this board came with my formbot kit. Needless to say I would've been a little lost otherwise.

@MakerViking Год назад

I love my BTT Pi, it works really good.

@sd4dfg2 Год назад

Just what II needed, thanks!

@BlueeBubble 9 месяцев назад

can you install rasbian and OS on this like a normal pi?

@numaiomul13 Год назад

THANK YOU!!!!! i installed it directly in my voron without realizing that it has a micro sd UNDER it (which is not shown in it's manual) I i kept trying to flash it with the usb port.

@dannyperkins4220 18 часов назад

Would it be possible to download BTT firmware onto a raspberry pi 4b?

@petermontgomery2821 11 месяцев назад

Great product but the mounting holes are not the same. Just take a look at it. One is square the other one is not, you can visually see the difference between when it shows the top view of each board - just a heads up in case you were planning on using an existing raspberry pi case to use this board.

@albertriba4823 5 месяцев назад

Se puede usar el connector usb c para conectar-lo a la placa de la impresora

@asdwwhite 6 месяцев назад

What if ı forget to remove jumper before ı power it with 24V ?

@MrRobertlbrown2 Год назад

One of the four mounting holes does not line up with the hole for the pi. This makes any mounting bracket or case designed for an actual rpi, unusable for the BTT pi.

@fusiondew 10 месяцев назад

Is it possible to just mount it with the 3 holes that do line up?

@JFML1974 11 месяцев назад

Why do we have to remove the red bridge or Jumper??? Prevent power from getting from screw connector to USB C???

@DD8842 Год назад

The problem with these boards is support. Pi has the community

@waynemenzie Год назад

Totally agree. But if somebody has a current project and can't wait for a real Pi to be available it's good to have this option.

@looxonline Год назад

If your goal is to use klipper then there is ample support for this board. If your goal is to use it for a generic purpose then it is running armbian and the armbian forums are very active with heaps of support.

@joewynn2445 11 месяцев назад

At 8:43 how do I find the klipper.bin file so I can install it onto my printer?

@KhOrganization 3 месяца назад

8:32

@srboromir452 9 месяцев назад

I still can't get a picture or the see the wifi AP

@MacFly669 5 месяцев назад

Thank you Rui ! 👍

@sd4dfg2 Год назад

The long wire isn't the antenna right? It's the sticky pad? Do I need to worry about where it's mounted? e.g. far from the steppers, and not near the board? on or off the printer's metal frame?

@owenaero Год назад

I'm purchasing a voron 2.4 ldo kit and it wont come with a pi my question is can i use this as a direct replacement ill also be using a ERCF filament changer. or should i just bite the bullet and get a raspberry pi

@looxonline Год назад

Yes, this will do the trick for the LDO kit. Note that you can't run a DSI display from it though so you need to stick to the mini12864 or use an HDMI display.

@sd4dfg2 Год назад

This is what ships in the Formbot V0.2 kit.

@Adameus 11 месяцев назад

Hello! does retropie or recalbox or similar linux-based operating systems work on it?

@TheBudgetTechnician 4 месяца назад

I don't think it would be viable. Less ram than what's usually on a raspberry pi. Don't see why you couldn't install a Linux desktop distro and go from there

@TheBudgetTechnician 4 месяца назад

Not to mention the slower cpu

@carlosrivas3440 9 месяцев назад

buen video tengo una duda , hay veces que conecto a la corriente y no se conecta en la pc , tengo que intentar varias veces , sabes a que se deba? gracias

@carlosrivas3440 8 месяцев назад

excelente video una pregunta como configuro para el adlx?

@diyreporpused7116 Год назад

boa noite estou com dificuldade em configura o input shaper com o pi v1.2 e btt adxl v1.0 nao detecta o adxl obrigado

@otann Год назад

Only 3 mounting hole locations are the same.

@the3dhermit 10 месяцев назад

What is the screen that the BTT Pi is connected to via HDMI? I was having trouble getting my SKR board to connect to the BTT TFt, so I wanted to use an HDMI screen.

@CS_Aspects Год назад

Just got one of these myself and got it working. Can you attach more than 1 printer to these? I assume you could but I haven’t worked out how to do yet.

@looxonline Год назад

Up to 3

@CS_Aspects Год назад

@@looxonline thanks, can you point me to how to do this please?

@looxonline Год назад

@@CS_Aspects ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8vkzpvia4mg.html

@kravtsov2438 4 месяца назад

Good guide! Спасибо!

@skappalee Год назад

Hi, do you have rpi pin-out for SPI ADXL345? I can't get it work, thanks in advance

@mbot3dchannel Год назад

I also need it, a few weeks ago I bought a btt pi and successfully installed klipper, but when I tried installing the mellow version of adxl345, it couldn't work on the spi connector, and also got the error: invalid ff x e5 , etc

@carlosrivas3440 9 месяцев назад

como se hace la conexion del ventilador

@voxpop9 7 месяцев назад

In my opinion, it is unnecessary to install putty as you can simply use window's built in CMD / Terminal using the command: ssh (username)@(ip) e.g. ssh pi@192.168.x.x this will boot u straight to the password input screen. I recommend using terminal and this allows u to avoid installing 1 additional software that arguably isn't as nice to use.

@LBM01028 Год назад

What does this Pi actually do? It seems to me that all it does is install Klipper firmware to your printers main board? Isn’t there other ways to install the firmware. If it replaces a Raspberry Pi then does it run Octoprint because that’s all I ever used my Pi for as my Ender installs firmware directly from MicroSD? Is it an alternative to Octoprint?

@cyrillowe1271 Год назад

Can I set this up without a screen?

@botialoach1 Год назад

Does it work with Home Assistant?

@jstro-hobbytech 9 месяцев назад

Hey rui the board is on sale really cheap with the biqu b1 and talks about a cloud service but cant we just put klipper on biqu b1 and make it faster? I wonder if something isnt being said in the ad

@ruiraptor 9 месяцев назад

Hi, if it has the same board, in principle you can install Klipper on it and run it normally.

@brunofernandes8697 11 месяцев назад

8:10 @ruiraptor Como é que eu sei os settings da minha impressora? Que settings são esses?

@ruiraptor 11 месяцев назад

Olá, esses settings são relativos á board da impressora. Que board é?

@brunofernandes8697 11 месяцев назад

@@ruiraptor É uma creality v4.2.7, aquela "antiga" com steppers silenciosos

@brunofernandes8697 11 месяцев назад

@@ruiraptorEntretanto já consegui resolver o problema. Estava a descarregar o ficheiro config da placa, mas tive que alterar o nome dele para "printer.cfg" para o mainsale o conseguir ler! Acho que agora já devo conseguir acabar a instalação XD

@ruiraptor 11 месяцев назад

Veja no topo do ficheiro .cfg as instruções para esses settings: github.com/Klipper3d/klipper/blob/master/config/generic-creality-v4.2.7.cfg

@brunofernandes8697 11 месяцев назад

@@ruiraptor Obrigado, se eu tivesse visto este ficheiro já me tinha poupado muitas horas - -' No entanto, não consigo encontrar o ficheiro "out/klipper.bin". Mesmo no video, não encontro esse diretorio de "home/pi/klipper/out", mesmo pesquisando com a pesquisa Windows :/