Тёмный
No video :(

Bucket Repair Made Easy with Franken-Fab 

Weld.com
Подписаться 1 млн
Просмотров 22 тыс.
50% 1

Bob & Cricket are doing a bucket repair for a customer! Watch the prep, clean up and all the rest of the processes needed to get this beast back in shape.
Download the WELD APP, check out our member Discounts through our brand partners and links to our podcast and social channels here: linktr.ee/Weld...
Disclaimer: As an Affiliate and Industry Influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links. Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.

Опубликовано:

 

23 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 78   
@MeltinMetalAnthony
@MeltinMetalAnthony 2 года назад
The scarfing tip is curved for your pleasure
@Rych_erd
@Rych_erd 2 года назад
😂😂
@theweldinokie8689
@theweldinokie8689 2 года назад
EPIC 😂
@amosbackstrom5366
@amosbackstrom5366 2 года назад
*Her pleasure, or his, we don't discriminate
@tomasalvarado207
@tomasalvarado207 2 года назад
😂
@jasondavidson1841
@jasondavidson1841 2 года назад
operators that are not operators are my favorite operators, keeps me in business. that ln-25 is great, i got one thats like 30 years old and still works like brand new
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
That's how we stay alive too my friend. Thanks for the feedback 👍🏼
@grumpyone5963
@grumpyone5963 2 года назад
I had to repair one this week after a 16 year old had been at the controls. Not as big as this but an opening bucket off a small loader. About 250kg (550lb) it has a week point that breaks and then bends around a pivot pin before snapping completely under the force of two rams.🇬🇧
@retirementhobbyfarmdiyadve1511
@retirementhobbyfarmdiyadve1511 2 года назад
This was one of my favorite videos. As a hobbyist starting later in life, the step by step overview for the repair, given a short video, was excellent and demonstrated how to go about a big repair. Not that I will do those, but the thought process and techniques will help me as I tackle repairs on my own small equipment.
@mcfwelding
@mcfwelding 2 года назад
Now that's a bucket repair !
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
🙏🏼thanks buddy
@danielbowen2523
@danielbowen2523 2 года назад
These are some of my favorite videos. Real world application and the extra work that goes into welding. 👌👌
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
🙏🏼👍🏼thanks for the feedback
@welderdude1
@welderdude1 2 года назад
I do these types of these repairs as my main source of income. Tons of hardfacing as well. Very cool video. I need to get a needle scaler.
@calebc6028
@calebc6028 2 года назад
this should be a good one, just got my Everlast 225,!
@dillanhamilton
@dillanhamilton 2 года назад
Jealous
@ypaulbrown
@ypaulbrown 2 года назад
Bob and Cricket...the Dynamic Duo, Really love this rebuild.....not really a repair it is so thrashed......one step at a time, sure hope the viewers take note of how careful you are......and precise.... one day I will get over to the shop to pester you two.... sorry to be so late to the show today, but I was actually working...... yes, the old geezer was working cutting stainless with the band saw and laying out a Bigillion holes to drill... and did a big pot full of stainless mig last night sticking 14 gauge to 11 gauge fillets and trying not to burn through or cook it.....lovely as they say somewhere.....Bravo Guys, Paulie B
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
Thanks Paulie!
@ypaulbrown
@ypaulbrown 2 года назад
@@bobhigginbotham9035 you bet ole buddy.....
@benben-lt1di
@benben-lt1di 2 года назад
Currently building a new EX 5600 bucket with a fill capacity of 46 cubic yard. My crew and I also started a repair 106 cubic yard ESCO dragline bucket repair. Been building and repairing buckets for 11 years.
@twofortyz1719
@twofortyz1719 Год назад
That was awesome. I love welding. I weld for fun and love the challenge of it. This video was great. Glad I found this. TY!! App downloaded!
@BrandonLund
@BrandonLund 2 года назад
Thanks for sharing!
@welderdude1
@welderdude1 2 года назад
I use mostly E7010 of various diameters as it tends to be more elastic and able to withstand vibration and impacts.
@randomschittz9461
@randomschittz9461 Год назад
Where do you get your rods?
@welderdude1
@welderdude1 Год назад
@@randomschittz9461 local welding supply shop. Part of Fresno Gas.
@richardvillanueva8786
@richardvillanueva8786 Год назад
@@welderdude1 Fresno CA?
@welderdude1
@welderdude1 Год назад
@@richardvillanueva8786 Bakersfield.
@jessicamercer6027
@jessicamercer6027 2 года назад
So excited to see how well you're doing! Great Video man!! Great job!!!
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
Hammer wrench!
@theweldinokie8689
@theweldinokie8689 2 года назад
Awesome work! Very informative 💯 👏
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
Thanks homie!
@xanderopal7367
@xanderopal7367 Год назад
Good stuff in here, some useful tips I can use-- I've got some heavily used loader buckets to fix, and try to keep from needing to be fixed twice.
@justintasht1067
@justintasht1067 2 года назад
Fantastic work really enjoyed watching it great skills you both have I bet that was hard work.
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
Thank you, thanks for the feedback 👍🏼... Most big jobs have their challenges but all of us as welders have the power to overcome.
@aaronwilson3952
@aaronwilson3952 2 года назад
Hell yeah.
@MeltinMetalAnthony
@MeltinMetalAnthony 2 года назад
Dam Bob talking shit on the operator 🤣😂 sound like me
@cougartrx
@cougartrx 2 года назад
I agree it's not always the operators fault something breaks. Seen many new buckets rip apart, because manufacturers don't always build to last. They build them to sell. Quality control. I've heard this too many times, the operator tore it up. Lol
@jessicamathe5025
@jessicamathe5025 2 года назад
Good stuff Bob! 👊🏼
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
🙏🏼Thanks Jess!
@petermccuskey1832
@petermccuskey1832 2 года назад
Nice job
@alexnelson6196
@alexnelson6196 2 года назад
Those extra long teeth create a load disadvantage for the bucket. I’m not surprised it tore.
@georgekefallinos8120
@georgekefallinos8120 2 года назад
i like this👍
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
Thanks!👍🏼
@MAASAIWITHPASSPORT
@MAASAIWITHPASSPORT 2 года назад
Nice one
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
👍🏼 thank you
@aaryanpanwar6405
@aaryanpanwar6405 2 года назад
Damn that was amazing
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
🙏🏼thank you!
@anthonymarino4260
@anthonymarino4260 Год назад
great vid. thanks
@Weldinginlove
@Weldinginlove 2 года назад
Very interesting for Your job sure. . . . And me make the big bucket in Indonesia . . I'm scary if my bucket like that . .
@mcsmith7606
@mcsmith7606 Год назад
What size flux wire are you running? I wish you guys would say what type and size consumables you use. The brand is not necessary,
@MissionX5
@MissionX5 2 года назад
Well done ...Wondering if you guys did 100% pen on that lip. I have notice most buckets are not factory full pen. Also why mig ? My self be grabbing the 1/16th dual sheild?
@markmcallan973
@markmcallan973 2 года назад
Your on to it bro! Most bucket lips I've seen rip of are due to not welding the lip whith full pen!👍
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
We did not full pen however we put in a heavy bevel, overkilled our stacks and put in heavy 1" plate gussets. The factory was not full pen either and the bucket owner assured me of his operator error.
@wemcal
@wemcal 2 года назад
great repair!!!! GREAT REPAIR!!! I do have a question.... why not 11018 rods
@williamthomas9463
@williamthomas9463 2 года назад
There are times, per Lincoln Electric Process Engineering, that you need to use an under-matched filler metal. This is one of those times. The cutting edges and side plates are so hard that the stress need somewhere to go. The softer weld metal deposit is that relief point.
@aaronmcclain1279
@aaronmcclain1279 2 года назад
Good job . Getting done anyway possible thinking on your feet . If you want see another way look at cutting edge engineering Australia . Has few rebuilds and ones that he was able to re skin them . Way to go guys from a machinist not a welder . Keep turning and burning . Burn them rods into cash .
@rustycollins8575
@rustycollins8575 2 года назад
I haven't seen red rod in years 5p+ is the way to go unless you enjoy eating sparks
@jimmybritt9537
@jimmybritt9537 2 года назад
That's a nice job you're doing there but don't call it a field repair 👍👍🇺🇸
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
Thanks. Maybe better worded from the field😬
@jimlott2895
@jimlott2895 2 года назад
Why didn’t you use the mig to weld out the sides ?
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
We are just rod hands so we typically lean on electrode over wire.
@goatsinker347
@goatsinker347 2 года назад
Wish your app would accept my info, but sadly it won't.
@Welddotcom
@Welddotcom 2 года назад
It is still in beta testing. It will be out next week :)
@GRich120
@GRich120 Год назад
#myfavbohlerstickelectrode - Nice choice with the Bohler 7018.
@zacharysaxton4734
@zacharysaxton4734 2 года назад
Did you use AR plate for the gussets inside or just regular a36? Just curious
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
A36 was what we had in shop but it was ¾" thick.
@zacharysaxton4734
@zacharysaxton4734 2 года назад
@@bobhigginbotham9035 I don't blame ya. It looked good!
@silverstreamweldingltd471
@silverstreamweldingltd471 3 месяца назад
Eagle 10,000 is not the same as a 225. 225 have 25v CV power . Eagle is CC only
@Bro-bs8gi
@Bro-bs8gi 2 года назад
In my experience when that type of material is heated like that it's never the same it will always be weaker there all that heat anneals it but replacing all that would not be cheap whatsoever
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
I agree. We gave the customer the option to replace but they chose the Frankenstein rebuild route. We did stack some heavy gusset plates to help accommodate for that. Thanks for the feedback
@donnelson2087
@donnelson2087 2 года назад
Question do you specialize in heavy equipment repair? The reason I ask is that I've never seen that type of bracing to the inside of the cutting edge. Outside on the bottom of bucket floor and to the side plates we put them on for wear call heel shrouds. Please I'm not knocking your welding skills, your both very good welders it just looks like more of a bandaid. Now i have seen factory reinforcements on the cutting edge to side plate but it was on huge dragline buckets or some old model machines.
@randomschittz9461
@randomschittz9461 Год назад
Question, do you specialize in heavy equipment repair?
@markmcallan973
@markmcallan973 2 года назад
I noticed the router to lip connection was welded without full penatration ! A big no-no if U don't want to tear a lip off!
@markmcallan973
@markmcallan973 Год назад
@UCZyN8PhdOS9IyaMFjUYnBOQ hahaha I've forgotten more about fabrication and welding of earthmoving equipment 🤗
@chrisdavis3347
@chrisdavis3347 2 года назад
🤘🏻👻🤘🏻
@bobhigginbotham9035
@bobhigginbotham9035 2 года назад
🤜🏽☠️🤛🏽
@Smokeyfilms_
@Smokeyfilms_ 2 года назад
39 hrs..
Далее
Bucket Shank Repair
26:33
Просмотров 115 тыс.
Most Difficult Repair I’ve Ever Made
16:35
Просмотров 61 тыс.
OBLADAET - BARMAN
03:06
Просмотров 129 тыс.
NPC Bloxfruits🤖🔥| Doge Gaming
00:13
Просмотров 640 тыс.
How do you TIG weld COPPER?! 🤔
18:04
Просмотров 136 тыс.
Every Fabricator's Best Friend | Plate Dog and Wedge
7:58
excavator rock bucket overhaul rebuild in 5 mins
5:59
Bucket repair changing cutting edge
19:46
Просмотров 6 тыс.
Major repair on a toe tip bucket. Part 1
30:58
Просмотров 39 тыс.
Loader Bucket Cutting Edge Replacement
6:04
Просмотров 53 тыс.
CAT 637 Crossmember and Apron Repair
51:43
Просмотров 444 тыс.
3 Flux Core Welding Myths DEBUNKED
11:49
Просмотров 2 млн
OBLADAET - BARMAN
03:06
Просмотров 129 тыс.