This happen to me on my 2014 RR. Exactly how he explained it. Did this job in my drive way. Took me about 3 weeks to get parts and resurfacing of heads. Shops did not want to replace the gasket they wanted about 17k for a new engine installed. Spent about 3k on parts n resurfacing. Did the labor myself. It sucks But if you’re mechanically inclined you can do it.
That is wicked! Putting plastic in a high temp environment in an 80 thousand dollar car. My 7 year old knows what happens to plastic in a hot environment. Is this a cost saving measure or just being wicked? What is wrong with metal for such a sensitive part? It is not the money for those who have it. It is the inconvenience.
I just got a coolant leak in my 2013 RRS. Suspecting that it is an issue. Shame is, that I've got a new engine in 2019 and dealer said that they indeed put new y-pipes with new engine. So 3 years, 40,000 miles these crapped out? Really? Also, I have a temp gauge, arrow never moved from the middle, no low coolant warning even now with empty expansion tank. Is my coolant level sensor defective? I am even tried to go in to service menue and clicked "show warnings" - nothing.
Please help me, Jaguar Xj 5.0 supercharged. The water goes into the oil in large quantities quickly. Do you have any idea what might be causing this? Gasket? Thanks.
You’re gone that far I would just go to a metal engineer and have them make me the same exact part out of stainless steel so that never happens ever again but this is very helpful
Hi Is it possible, can you give me all the reinstall tourqe specs for the 3.0 2016 rover? In the workshop manual I'm only seeing the 5.0 Thanks alot Much appreciated
I just replace the bypass tube front under the intake and leak 😢😢 just back again tomorrow, remove and check everything, plus I replace the bypass pipe on the back of the heads what a job OMG ILL never do this again
Just to.replace the. Cross over pipe? 400 to 500 dollars. And to fix the heads I'd they are warped. Another $1500. Just for labor. Now ill.take it to a machine shop they will.charge from 150 to 200 to level off your heads and inspect it as well.