Hi Guys!
Below you can find few ways to support the channel...thanks:
🔔 Subscribe for more CNC and woodworking videos just like this🔔
/ @falcon390cncworks
✅CNC I recommend✅
1️⃣ OpenBuilds CNC router: openbuildspart...
2️⃣ INTERFACE CNC Touch: openbuildspart...
3️⃣ XYZ Touch Probe Plus: openbuildspart...
✅Router bits I recommend✅
1️⃣ Starter Kit 💰budget friendly💰: geni.us/LiJ5vH
1️⃣ Starter kit (Sharkbits) openbuildspart...
🤝HELP SUPPORT THE CHANNEL 🤝
1️⃣ Patreon: patreon.com/Fa...
2️⃣ Etsy: www.etsy.com/u...
3️⃣ Buy me pizza🍕: www.buymeacoff...
✅ For inquiries contact me at:
📧 falcon390shop@gmail.com
Second channel-FALCON390 Workshop
/ @falcon390workshop
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Vcarve Pro Job setup Sheet summary:
Toolpath: 3D Roughing 6mm Endmill bit
Toolpath Info
Time Estimate: 00:12:37
Toolpath Type: Rough Machining Toolpath
Feed Rate: 1500 mm/min
Plunge Rate: 500 mm/min
Spindle Speed: 18000
Tool InfoTool Name: End Mill (6 mm)
Tool Type: End Mill
Tool Number: 1
Max Cut Depth: 10.5mm
Pass Depth: 3.5mm
Stepover: 4.8mm
Toolpath: 3D Finish 1mm Ball nose bit
Toolpath Info
Time Estimate: 07:40:07
Toolpath Type: Finish Machining Toolpath
Feed Rate: 1500 mm/min
Plunge Rate: 700 mm/min
Spindle Speed: 18000
Tool InfoTool Name: Ball Nose (1mm)
Tool Type: Ball Nose
Tool Number: 1
Max Cut Depth: 11.826mm
Stepover: 0.1mm
Toolpath: Profile 4mm Endmill bit
Toolpath Info
Time Estimate: 00:05:32
Toolpath Type: 2D Profile Toolpath
Feed Rate: 60 inch/min
Plunge Rate: 27.559015747921 inch/min
Spindle Speed: 18000
Tool InfoTool Name: End Mill (4mm)
Tool Type: End Mill
Tool Number: 1
Max Cut Depth: 20mm
Pass Depth: 2mm
Stepover: 3.2mm
#CNCrouterproject
#DesktopCNC
#OpenbuildsCNC
#woodworking
#cncrouter
5 окт 2024