Budget bass shakers tested with affordable '100 Watt - 2 Channel' Mini Amplifier! [Banggood]

Подписаться 25 тыс.

Просмотров 21 тыс.

50% 1

*USEFUL LINKS BELOW. I wanted to try out a more powerful mini amplifier with my bass shakers and this 100-watt per channel amp seemed to fit the bill at the right price. This is a test and review.
▶ Buy this from here: www.banggood.co... (Save $$ on this product using this discount coupon code: BGpower001)
▶ The USB Sound card: www.banggood.co...
▶ Banggood EU Warehouse: www.banggood.co...
YOU MAY ALSO LIKE:
▶ 🔊BASS SHAKERS🔊 BEGINNERS HARDWARE SETUP GUIDE 'FOR SIM RACING' [Plus SimHub Quickstart] • 🔊BASS SHAKERS🔊 BEGINNE...
▶ BUDGET BASS SHAKERS FOR SIM RACING! 🔊Bodyshakers🔊🤔Are they any good?🤔 • BUDGET BASS SHAKERS FO...
▶ 🔊BASS SHAKERS🔊 AWESOME SEAT MOD! • 🔊BASS SHAKERS🔊 AWESOME...
▶ 🔊BRAKE PEDAL BASS SHAKER MOD🔊 and SimHub Guide! • 🔊BRAKE 'RUMBLE' PEDAL ...
▶ 🔊BASS SHAKER🔊 GEAR EFFECT FOR SIM RACING, with SimHub! • 🔊BASS SHAKER🔊 GEAR EFF...
▶ Wuzhi Audio ZK-1002 😻IMPRESSIVE😻 200 Watt Mini Amp For under £10 🔊🔊BASS SHAKER TESTING🔊🔊 • Wuzhi Audio ZK-1002 😻I...
▶ 🔊BASS SHAKERS🔊 Sim Racing Pedals MOD! Adding anti-vibration mounts improved tactile performance! • 🔊BASS SHAKERS🔊 Sim Rac...
▶ These cheap 🔉SOUND EXCITERS🔉 have potential for Sim Racing tactile! • These cheap 🔉SOUND EXC...
✅Subscribe: tinyurl.com/yy...
If you liked this video, please hit the like👍 and consider subscribing. And drop in your comments below the video!
You can help support Sim Racing Corner by using my affiliate links. I will earn a small commission for products bought through the affiliate links, but it won't cost you anything! Thanks!
#Simracing #SimRacingReviews #BANGGOOD

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@SimRacingCorner 4 года назад

▶ Buy this from here: www.banggood.com/custlink/vGv3QsFQ63 ▶ Save $$ on this product using this discount coupon code: BGpower001 ▶ The USB Sound card: www.banggood.com/custlink/vmmKAnVsan

@douglasfreeman3229 2 года назад

The water-in-a-jar test was most ingenious. Very "mad scientist". Brilliant!

@Shawn-fu3mp Год назад

Just got a Fosi Audio TDA7498E Power 160W x 2. Waiting for my Dayton BST-1 shaker. Been cranking som music thru 2x 12" driver towers and it stayed cool as a cucumber!

@JoseFcoBN 4 года назад

I see you made a good decision by switching to TDA3116d ... I feed with 24V.20Amp. every 2 tda3116d and change the source fan for a larger and quieter one (92mm x 25mm) you will also need to reinforce those bodyshakers if you want them to last you with a strong punch, I will try a new preview shortly and send you photos for reinforcement and cooling passive. greetings from Spain.

@SimRacingCorner 4 года назад

Thanks Jose, I'd definitely be interested to see what you've done to reinforce the bodyshakers. The amplifier doesn't have a fan, it's passively cooled. I haven't opened it, but I'm guessing there's a heatsink inside.

@MasterD427 4 года назад

Hi man, good video, i have same amplifier with the 2 metal cheap transducers, using simhub and they works very good. Would be interesting if you make a video about simhub and how to properly set this types of bass shakers.😉

@SimRacingCorner 4 года назад

Thanks buddy. A SimHub bass shaker tuning video is a great idea. I have a good think about that one.

@MasterD427 4 года назад

@@SimRacingCorner great! 😄

@markp2085 3 года назад

This setup looks like it works much better than my single buttkicker 2 that constantly overheats and shuts down. I am thinking about doing this type of setup for my rig, just got to work out how to attach it. I use a next level racing GT lite, so the frame is 1" pipe. Anyway, thanks for your informative videos.

@loveracing1988 2 года назад

Did you ever figure this out? I am planning the same thing

@markp2085 2 года назад

@@loveracing1988 For now what I have done is I purchased a small USB fan that sits on top of the amp. The fan faces downwards so it blows air into the air slots. This solved the problem of the AMP shutting down from overheating. I am still fighting the actual buttkicker with its overheating. I have alleviated a lot of that problem with a larger USB fan that also has a battery and a clip so I clip it right on the buttkicker. The fan can run on high on battery power for about 9 hours. As long as the red light doesn't come on or just comes on once in awhile on the AMP, the buttkicker does not shut down. This arrangement is working much better than it was without the fans. It is not perfect, but it is better. I got the fans from Amazon. They are the 10000mAh Rechargeable Portable Fan, 8-Inch Battery Operated Clip on USB Fan, and the Gaiatop USB Desk Fan, Small But Powerful, Portable Quiet 3 Speeds. I am still planning on eventually replacing the buttkicker with a couple of those more powerful transducers and getting a better amp. Also, on my next level racing gt lite rig, I originally had the buttkicker attacked to the horizontal pole on the back of the rig (think its there to attack shackers). But when I moved the buttkicker to the front horizontal pole that holds the steering wheel in place, I was able to nearly double to amount of vibration I was feeling. I also had to build up the pole where the buttkicker attackes with masking tape so it can make a tighter fit.

@menacegtr 4 года назад

Well done again Jeremy. To get further buttkickness i use the sound cards eq settings to push up the low end bass frequencies to fine tune the effets on my P1, its handy to get that strong rumble without distortion. I use 2 sound cards for simvibe and my rig certainly feels it. Your setup in this video shows that you can get profile to rumble. I had comments on my setup suggesting it doesn't get much power to shake the rig on there set up. How wrong they are. BIG thumbs up buddy. Dave.

@SimRacingCorner 4 года назад

Cheers Dave. Good tip, I must admit I haven't spent much time tuning the effects, it's something I should look into.

@MrMichaeljaggie 4 года назад

Good video! You've got yourself a new subscriber! Keep up these kind of awesome video's :) Bought 5 of those shakers today and will pair them with an 5.1 Home Theatre Receiver rated 100w per channel @ 4 Ohm. Should have plenty of power. Going to wire this via HDMI and use that as the sound output for my shaker setup. Should be alot of fun probably when this is done. Only thing I don't like about these cheapo shakers is the bare metal looks.. I will design a 'shell' to print over them and cover them a bit for the looks.

@SimRacingCorner 4 года назад

Thanks Michael and welcome to my little channel. 3D printing covers for them is a great idea, I like that.

@JoseFcoBN 4 года назад

I do not think it is a good idea, the great temperature burned the cover or the bodyshaker, it happened to me ... if you want more aesthetics you can put a box with a fan-extractor, or buy other bodyshakers with metal cover.

@MrMichaeljaggie 4 года назад

@@JoseFcoBN i Will not be playing these shakers any higher then say max 40%. Temperature should be fine and so will the printed cover. Only time will tell.

@MrSnacko 3 года назад

I am trying to hookup 2 50w 4ohm shakers to my surround system. I have them connected to the Mono Pre-Amp Subwoofer (is that the correct way to do it??) . I have tried two amps, a new Fosi 100w 2-8ohm, and a Marantz 125w 8ohm Mono amp. And my Denon S750H AVR has a setting for the Subwoofer output that goes from -12 to +12 db. I have to set it to +12 to get good shaking at all. But then my 2 subwoofers are too loud. I can turn the gain down on the back of my subs, but I don't think this is the correct way to set this up. I don't think I should be turning my subs down to only 25-30%. I have wired my shakers in parallel and series on the Fosi. 2ohms works best and it doesn't get hot. But still this doesn't shake as much as I think it should. What am I missing??

@christopherpope1800 Год назад

Cant find the amp anywhere?. Can anyone recommend a substitute, my nobsound cuts out running a BST1. Cheers.

@Cibosgamingandarchery 4 года назад

hey bud... can you please let me know where did you get the mounting for that Reckhorn shaker ? thx

@SimRacingCorner 4 года назад

Here you go: shakercentre.co.uk/bs-200-mounting-bracket.html

@CarsandCats Год назад

Question: Is there a way to send the channel that shakes my G920 steering wheel (vibration) to the bass shakers? I think this would be a lot more realistic than having the wheel shake.

@SimRacingCorner Год назад

Yes you can. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P-ux6Eyn-mk.html

@raventrax3287 3 года назад

Hello, I bought 3 of these bass shakers, which I mounted in parallel. What type of amp do you think i need to make them work properly?

@CY078 4 года назад

Does anyone know where I can get the transducer from ?? The link below has no stock and I can't find it anywhere else on the web. TIA

@sslyder180 4 года назад

Good vid I've been looking into this... Do you have a link for the shakers?

@SimRacingCorner 4 года назад

I got them on Amazon UK, they are nice and cheap there. Search for 'Rockwood Bodyshaker'. I just checked, but unfortunately currently out of stock.

@sslyder180 4 года назад

@@SimRacingCorner Thanks I'll go searching 👍

@SimRacingCorner 4 года назад

@@JoseFcoBN Wow, super cheap from there. Thanks for dropping the link.

@andkirby7 3 года назад

thx for the video. I'm just worrying about my flat neighbors :) So, how vibes will be passed to the floor? Should some rubber be used on the floor?

@SimRacingCorner 3 года назад

That may help, but do understand the bass shakers vibrating your sim rig generates noise regardless, so it's not silent under any circumstances.

@Kurvz 4 года назад

Good work as usual, I miffed as my little 25W amps are only on a quarter volume and shake the hell out of my rig, as I said before using three of them and their awesome maybe I'm just a more modern sensitive guy, just got a Fanatec DD2 and its killing my hands need to go back a look at your glove videos again. Keep up the good work

@SimRacingCorner 4 года назад

When I had the body shakers on the seat frame, it wasn't so bad with the weaker amp, but now I've put them on the pedal frame, the amp simply struggled to pass meaningful tactile through. And welcome to the world of direct drive wheel action, gloves will help.

@jogb9515 2 года назад

Good info, thanks. Could you set up front left/right and rear left/right bass shakers and would it give you left and right vibration?

@SimRacingCorner 2 года назад

Yes that is possible, though it's an effect that isn't always easy to achieve, in as much as being able to detect which side the vibration is coming from. As vibrations leak across the sim rig rather than feel like they are coming from a single location.

@jogb9515 2 года назад

@@SimRacingCorner Thanks, makes sense.

@gabrielmoralesvelez 3 года назад

Hi, It's possible to connect this system to a sound bar home theater system like a Nakamichi Shockwafe Ultra 9.2?

@SimRacingCorner 3 года назад

A cursory look at the specs of that sound bar doesn't appear it has any physical output channels to attach these too.

@gabrielmoralesvelez 3 года назад

@@SimRacingCorner I'm pretty new at this. This soundbar has 2 subwoofers with rca audio output. It is possible to output from the subwoofers to the amp/pre-amp of the bass shakers power source? Thanks.

@SimRacingCorner 3 года назад

@@gabrielmoralesvelez Technically yes, but I haven't tried this. Google 'daisy chain amps' for material on this.

@stepet327 3 года назад

@simracingcorner: great video! Can you share with me what your test tone/audio is? What makes that tone in the shaker? Is it from a game or ?? TIA.

@SimRacingCorner 3 года назад

I used the 'test now' option in SimHub 'Shakeit Bass Shaker > Sound Output' which just fires out a burst of through the amp.

@stepet327 3 года назад

@@SimRacingCorner aha, I'm using SimVibe. It also has a test but not like that. I might have to testing and experimenting. Thx!!!!

@robinferdinando4038 3 года назад

Where can i buy this amp nowadays? Linc is dead :/

@SimRacingCorner 3 года назад

That video is quite old so I don't know. But check this one out. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eLaOmRRu3NE.html

@RVRCloset 4 года назад

Nice little review as always buddy!👍👌 Once my Jetseat gives in I might look into all this stuff.😎

@SimRacingCorner 4 года назад

I have always been curious about the Jetseat. That normally gets me buying more stuff, but I have made a promise for 2020 to get through my current horde of goodies I have been collecting for future videos first before buying new things.

@RVRCloset 4 года назад

@@SimRacingCorner I like the jetseat, a more of a plug and play but simpler I guess, but still pretty cool.👍 That sounds like a good new year promise! I have a few new stuff on the way and a really big I've not yet pulled the trigger on. Then I will lay low with stuff for a while!💸😅

@SimRacingCorner 4 года назад

@@RVRClosetYou have an understanding wife, or are you smuggling in stuff at the dead of night?🌛 Is the big item your trying to resist a ProSim H-shifter?

@RVRCloset 4 года назад

@@SimRacingCorner Hehehe, a bit of both I guess, some things I'm able to smuggle in, others not.. :) But yes, even though she isn't really understanding what the fuss is all about.. She let me play in the closet, and I think she is happy that I at least have a hobby keeping me at home! :D Nah, the ProSim H shifter will find it's way in soon hopefully, hehe, but after that I think I need to lay low for a bit.. ;)

@SimRacingCorner 4 года назад

@@RVRCloset Haha. Well, I hope you emerge from the sim racing rabbit hole of neverending spending before it's too late.😱

@therealbennymack 4 года назад

Hi mate nice Vid. Can you tell me what sort of power supply to use?

@SimRacingCorner 4 года назад

Sure, this is the exact power supply I'm using. www.amazon.co.uk/gp/product/B07CHDZQDH/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

@therealbennymack 4 года назад

@@SimRacingCorner Cheers. I have just purchase 2 AuraSound AST-2B-4 Bass Shakers. Do you think this amp would give me a similar result?

@SimRacingCorner 4 года назад

@@therealbennymack Looking at the specs, those bass shakers are 50 watts, so you do need to be careful not to push too much power through them. So you could still this amplifier, but pair it with a slightly lower wattage power supply, such as this one: www.amazon.co.uk/DTK-Charger-90-240V-Switching-Transformers/dp/B07K85GJ54/

@therealbennymack 4 года назад

@@SimRacingCorner Legend. Cheers mate