Тёмный

Budget LS Factory Five Cobra | Build Update 82 

Amateur Hour Garage
Подписаться 1,7 тыс.
Просмотров 2,8 тыс.
50% 1

Budget LS Factory Five Cobra | Build Update 82
body work
Tools and parts I use in this video (may be an affiliate links):
Heat Storm HS-1500-OTR Infrared Heater, 1500-watt | amzn.to/3VyoEJL
3M Marine High Strength Repair Filler, 46013, 1 qt | amzn.to/3Vcg84M
Frienda Body Filler Spreaders Automotive Body Fillers Plastic Auto Spreader Auto Body Spreader for Applying Fillers Putties Glazes Caulks and Paint (6, 3 Sizes) | amzn.to/3ICESLU
5-Inch 8-Hole Hook and Loop Sanding Discs 80-Grit Random Orbit Sandpaper, 50-Pack | amzn.to/3wM6ZFO
3M All-In-One Respirator, Best for Sanding, Fiberglass, Drywall, Painting, N95, Exhalation Valve Helps Direct Exhaled Air Downward, Relief From Dusts And Certain Particles, 10-Pack | amzn.to/3Pfuq0v
Budget LS Factory Five Cobra/Roadster Playlist: • Budget LS Factory Five...
This video should not be considered a ‘how to’ instructional video. This video should be viewed as a ‘how I’ informational video. Always refer to your build manual or instructions from the manufacturer for proper procedures and fitment.
All images and or video obtained from Factory Five Racing, Inc is used with expressed permission from Factory Five Racing, Inc.
#FactoryFive #LSswap
Intro Track
Track: ROY KNOX - Blue Eyed Demon [NCS Release] Music provided by NoCopyrightSounds. Watch: • ROY KNOX - Blue Eyed D...
Free Download / Stream: ncs.io/BlueEyed...

Опубликовано:

 

16 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 12   
@johnd.williams3477
@johnd.williams3477 2 месяца назад
Carry on, brother, the end is in sight.
@83jward
@83jward 2 месяца назад
Glad to see you haven't lost interest.
@AmateurHourGarage
@AmateurHourGarage 2 месяца назад
I should have the car totally done by the end of summer
@wild_bluyonder843
@wild_bluyonder843 2 месяца назад
My MK IV is at the same place as yours. Getting ready to pull the body for sanding the difficult areas and bed lining the underside. Very curious what product you'll select and the challenges you'll discover. I've been driving mine for several months and have been reluctant to pull the body because of the fun factor. Central Texas heat is climbing, so it is probably a good time to take it off the road for a while.
@AmateurHourGarage
@AmateurHourGarage 2 месяца назад
I used Rust-Oleum 342668 Automotive Truck Bed Coating, Quart, Black, 32 Fl Oz. It took 1.5 cans. amzn.to/45xDBR8
@frankie21963
@frankie21963 Месяц назад
I've been following your build from the beginning. You do a great job, I'm looking forward to the time you can enjoy it. What does your son think of it so far?
@AmateurHourGarage
@AmateurHourGarage Месяц назад
Thanks for watching. My guy is 6 years old at the moment. I just hope he thinks his dad is cool. 😎
@jamesshriver5909
@jamesshriver5909 2 месяца назад
When you're sanding paper fills up because of something stupid like that wet sand it it will help
@EskimoPeelot
@EskimoPeelot 2 месяца назад
Why didn't you just roll it into the house and do it there?
@charlesrussell8557
@charlesrussell8557 2 месяца назад
What are the old-timers to do that with a lead didn't realize it was a kit car fiberglass
@davidh3152
@davidh3152 2 месяца назад
What grit sandpaper are you using with the deWalt sander? Is it 120? Thanks
@AmateurHourGarage
@AmateurHourGarage 2 месяца назад
Starting with 80. After skim coat will move to 180
Далее
Factory Five Cobra HPDE Gone Wrong
2:48
Просмотров 29 тыс.
Тарковский - гений
00:48
Просмотров 742 тыс.
Last phase of Cobra Daytona Coupe Factory five build
18:09
Factory Five Cobra: Engine Selection
15:46
Просмотров 452 тыс.
1964 Porsche 356C Cabriolet - Car Restoration
31:41
Просмотров 1,1 млн