Buick Lesabre on 24s, Lift Do's and Dont's 

Did your struts last I had to buy some new ones after riding on my 24s after 2 years I don't think my stock struts could handle the weight of the 24s

@@boxchevycaprice90 naw bending that strut ain't good. It puts too much tension on the strut. The best thing to do is cut that strut plate off and reweld it. I bout a harbor freight welder and did mine myself

Appreciate that my man, happy to help 🤘🏽

Happy to help man! thank you

Hello do you still have the lift ??? I’ll buy it

What's the biggest size rim that will fit on a LeSabre with no extra work? (No cutting) (no lifts)

Limit straps? What are those?

dwgwG Luckett look on my channel

Nice. Replace all fluids belts etc run forever..

You want a cookie?

Dave Houston you want attention?

@@rogeroliver3919 u do

Can you explain I'm trying to lift my car 24ds sndvdo it mu self

You just said you have different motors 350 is a small block an the rocket motors are actually 355s so next time you brag about an imaginary car it will least sound right

Hey man, I’d be happy to help! And since your here...... I sold my Buick (regret) but still have the wheels, selling them cheep being they only fit on a few cars being I had them custom drilled for the car. They would fit your Park Ave perfectly if your interested 🤷🏽‍♂️

Facts I’d like to have one made too fam

😂 bro I'm fin do do same shit send me pic of yours wen it's done lol

Did you put 24s on your car yet

@@wootv5077 did you put 24inches on ywt

It did hit hard untill I cut that big hole in the roof lol

Adam DeFresh yeah that did kill it but the rag top is unique and that's all Adam u are lol

Would be tough but I’ll try anything twice.

Do it dude ride hard .

Approximately 2 more inches harder lol But in seriousness, a lot maters, wheel width and offset is a big deal

the red is just colormatch spraypaint from auto zone, and the black is rubberized undercoating spray paint

A cut off wheel and a mini sledge hammer

IER VIBEZ Hey man thanks! I couldn’t agree more the right set of wheels complete a car. And I couldn’t agree more of these cars are extremely underrated. Thanks for the feedback man

True .... Bacc in the day I had a 1990 CADI and did all this b4 and will never do it again and Im glad I saw this vid cuz I was think'n bout buy'n a lesabre right now, not anymore cuz the air shocks in the bacc and spacers in the struts up front is some bull shyt fr. The spacers and everything else you got jammed in the struts fall out when you drive over speed bumps, train traccs etc... and the front end squats and starts shredding the tires and getting everything to sit even is a real bytch fr. Also the front end lift and bend will cause both sides right above those struts on top the fenders to crack straight across where that strut mounts. Not worth it fr.

dante jackson My 2011 impala shakes when i put the 4s on and i have the extended struts what you think the problem is

Ari Reid That is what happened with this car, the front axles are binding up because they are pinched on too much of an angle, that’s why I ripped it all out and did it the way I did.

welp....This was 3 years ago, car is still fine. I mean, common sense, the wheels are MUCH heavier so Im driving it easy, not pushing it or beating on the trans. As far as the speedo, yea thats about 10mph off.

@@younglords7131 if you look at the base of the headrest where the seat connects there is a tiny little hole, I used a very small Allen key when you push it inside that hole it releases the headrest🤘🏼

Kevins555tube It’s a tight squeeze but you just have to work it in, I used a little WD-40 and just worked it with a little help from a rubber mallet

@@AdamDeFresh ok, thanks for your information. I appreciate it

Kevins555tube no doubt, raving if you have to trim the corner round with a razor to get it started, once it’s in it ain’t movin

Does it have to be in the top or bottom or middle or it doesn't matter?

Bruh wudnt b n one if we aint get Hyphy

Not sure about the offset changeover, but a 20 inch should fit on this car no problem without doing any work

My man!!! 🤜🤛

What kind of dumb question is that

Of course it will, every component in the drivetrain is going to be stressed from those heavy things. You can get lighter weight forged wheels but be prepared to spend $$$$$ on them. I'd just leave it stock, but to each his own...

Don't listen to these dudes...if you drive the speed limit its fine...doing burn outs and racing people all damn day yes it would...I have 24s on a 13 impala and I drive the highway to work every day...30 minute trips there and back...been doing that for 4 years and I'm fine

Happy to help my G, good luck!

Dont do it. U will bend rims left an right. 20" looks an rides best. I got em.

they have them at autozone, advanced, pepboys etc. The turnbuckle I got in home depot

Adam DeFresh how did you put it on to adjust by itself

It’s a 2003

probablly

Add rubber spacers I have a 2001 Buick lesabre on 22x8.5 and all I did was put spacers and ride

Aaron Villagomes posted this video 2 years ago, today........trans shifts smooth, wheel bearings are fine. Thanks tho 🤘🏽

Ivy Winston I looked everywhere on RU-vid trying to figure out how to get these headrest out LOL if you inspect where the head rest slides in you will see a tiny hole, I stuck a tiny Allen key into the hole to release it, then it slides right out 👌🏾

Adam DeFresh thanks didn’t even notice it

Ok so i have a Lesabre too. Im going 26s and i was going to order the same universal car lift as well. So you’re saying go out and buy some limit straps or turnbuckles so the cv joints won’t bind like his?

You need a second channel just for auto stuff...I would definitely watch...

sirsylk this isint the 1st time I've had to do this, I've never had a problem

Ke Vaughn no lift, i'm running mine stock height right now on 24's I had to trim the front bumper a bit to turn, and remove the inner wheel wells in the front but with 22s you're most likely be fine

Adam DeFresh I appreciate it brother man

Ke Vaughn no problem man let me know how you make out

Run 235 30 22s for a stock buick but yes trim front bumper a little