Build 1/24 Tamiya Nissan Skyline R32 GT-R 

Oh, keep it for a long time if the decal is still in good condition. Build it, have fun with the model.

Thank you :)

Thank​ you​ 😀

So that the primer adheres better than before

Thank you for watching. I'll try to follow your suggestion in the next video 🙌

Using brush for painting the body might create uneven surface. It's better to us spray tools for model kits. 🙂🙌

Use Tamiya lacquer paint spray cans and spray outside on a large sheet of paper or clean dust-free cardboard, only spray when the wind is very low, or dust will be stuck on the wet paint. Do not use a brush to paint the car, it will be very ugly.

Thanks you 😊

for long-term color adhesion It is best to use a primer. ✌

Enjoy it

Thank you for following my work.​ 😅🙂

Thank you. Build it. I want to see it when it's finished. :)

Sparmax 3 and no brand airbrush

Resin

Thanks for watching 😊

Thanks my friend subscribe subscribe

👍👍👍👍

Thank you for comment :) The advan neova concept rubber pattern has one side like ad08 15:04 , I didn't put it on the wrong side at all. This tire will be worn the same as r888. But the tires were not created in the right direction. So look that I put it upside down

Thank​ you :)​

Thanks 😊

i recommend tamiya​ silvia​ s13

Thanks for the tips! 🙂

@@BRscalegarage I had the same issue spraying Tamiya Mica Red for my R32 Nismo Custom model. I changed to my 0.5mm airbrush and held the nozzle back further (5 inches), for a wider spray, and I also increased my overlap from 50% to 80%. The metal flake is flawless with no 'tiger stripes' or any other dark spots.

Thank​ you​ very​ much.​Next​ one​ is​ coming​:)​

Glue is very necessary. You should get the glue for model kit only. I recommend Tamiya craft bond -for transparent part and Tamiya Extra Thin Cement for opaque part only , quick-dry, be careful not to apply on your paint. For me, I often use Craft Bond.

Alright. Thank you! Keep up the content!

Tamiya craft bond

Thanks 😊

Thanks 😀

Thanks 👍

Use Tamiya clear red paint or a red sharpie marker. Apply the paint or marker to the backside of the brake light lens.

I will come back to build another new r32 soon.​ 😅

Tamiya craft bond bro 🙂

Thanks you can do it 😊

Tamiya craft bond

Thank you :D

The difference between these two boxes, you can see the details of the nismo boxes. www.tamiya.com/english/products/24341/index.htm

@@BRscalegarage couldnt really notice the difference hehehe

The normal box doesn't have nismo accessories such as steering wheel, brakes, decals, exhaust,air duct so you can see pictures from the website above. 😊

@@BRscalegarage i never used a waterslide before. Another question hehe. On the dashboard, do you use a topcoat or not? Before applying the decal, does the surface needs to be topcoated or not?

@@noname-pv8lw You can use tamiya x-22 to coat it, for me didn't use it.

Tamiya craft bond 😀

Hello Davide giorgini. I usually mix color 1 thinner 1.5 😊 The ratio is not fixed. I mix and test before spraying.

1.Glue; Tamiya​ extra​ thin cement, Tamiya​ craft​ bond​(for​ transparent parts), modeler's side​ cutter, sand paper, tweetzer , art​ knife. 2.You do​ need​ to​ get​ paint. 3.​At​ lesast 2​ weeks. Hope​ you​ enjoy​ making it​ :)​

z-tune is on the list

@@BRscalegarage not z-tune, how about hr/er/enr34?

Of course I would do er34. 😊

@@BRscalegarage nice!👍

Thanks 💯

All the parts were in the box

Tamiya TS code spray cans (lacquer) are very good for model cars. Shake the can VERY well before spraying, spray in a well ventilated area with low dust in the air, and hold the can back 8 inches. Move the can fast from side to side, do not move across the car slow, you will get too much paint built up and it will run in drips down the car. Do a light coat first, it will not cover the car completely. Then wait 10min and do another coat, a little heavier this time. Then wait 10 more minutes and do a final coat. Wait 1 day before spraying clear coat and do 3 coats of clear coat the same method as the paint, light coat first, then two medium coats, all 10min apart.

Thank you. I bought from my country. I'm not sure if they send to foreign countries or not.​ 🙂

Thank you for watching. I admitted there are still some mistakes that need to fix. I'm also Takumi's fan too 🙂

Hello Damian Sorry for late reply, 3d work I bought from my country. But you can look it up on cults3d, I see some files are available for sale.

@@BRscalegarage thank you for your reply and keep up a good work 💪💪 greetings 😊

Thank you 😊

Depending on your skin type, you can use 4000 to finish at 10000.

What sand grit sandpaper do you recommend on start to finish?

@@miguelleal1829 For me, recommend Godhand GH-KS5-KB. There are numbers 2000-10000. Usually used before polishing, I use number 4000,6000,8000. 🙂

@@BRscalegarage what do you recommend on scale model 1/24 HKS GTR from tamiya

@@miguelleal1829 Have fun with the decal. 😄