Build a Freestyle FPV drone for $150!!

Подписаться 73 тыс.

Просмотров 3 млн

50% 1

UPDATED 2022 Budget Build: bit.ly/3B6nEm9
This is my 2021 $150 budget build drone. From start to finish I’ll show you what to get, how to assemble it, and even how to configure in betaflight.
The only equipment you need in addition to the drone itself is batteries, goggles, and a controller! (Links Below)
Drone Parts list:
Steele Carbon Fiber 5” Frame - www.banggood.com/custlink/mKG...
Caddx Ant 1200TVL Camera - www.banggood.com/custlink/DmK...
Mamba F405 Stack - www.banggood.com/custlink/vKm...
Mini VTX5848 - www.banggood.com/custlink/vmG...
Racerstar Race Edition 2205 2300kv Motors - www.banggood.com/custlink/Gm3...
HQ Freestyle 5” Prop - www.banggood.com/custlink/3GG...
Don't have a 3D printer?
20x20 - 30x30 mounting board: bit.ly/34JPick
Some of the parts I used have sold out. Check out these alternatives:
VTX: www.banggood.com/custlink/Kmv...
Emax motors: www.banggood.com/custlink/3G3...
4s Battery: www.racedayquads.com/products...
Additional stuff:
Budget Goggles: www.banggood.com/custlink/K3D...
Controller: www.banggood.com/custlink/KGD...
3D print Files:
Antenna Holder - www.thingiverse.com/thing:465...
GoPro Mount - www.thingiverse.com/thing:478...
Arm Bumpers - www.thingiverse.com/thing:478...
Camera adapter: www.thingiverse.com/thing:407...
30x30 20x20 adapter: www.thingiverse.com/thing:300...
__________________________________________________________________________
***Banggood Discount Codes***
- 8% off FPV products - - - - Parts8
- 11% off For new customers - - - - - Toysho
- 10% off Eachine - - - - - BGEachine10
__________________________________________________________________________
Support the channel by clicking these affiliate links when purchasing parts at these sites!
RDQ - bit.ly/3Cg16Bg
GetFPV - bit.ly/3RroJf8 (5% off Coupon - 0KC6D3YB02RN)
BetaFPV - bit.ly/3E07NbW
Banggood - bit.ly/3xRFHM3
Insta360 - bit.ly/3dHq4jz
Starter FPV Drone Kit with everything you need: www.banggood.com/custlink/3Dv...
My Favorite Pre-Built Drones
Geprc Cinelog 25: bit.ly/3ikKDRa
BetaFPV Pavo 360: bit.ly/3IPimhT
iFlight Titan XL5: www.banggood.com/custlink/vvm...
Digital DJI System
DJI FPV Goggles V2: bit.ly/3qfTEzr
Caddx Polar Vista: bit.ly/3tsqTSp
Frames
iFlight XL5: bit.ly/3wfgwTr
Steele 5” Budget Frame (Apex Clone): www.banggood.com/custlink/mKG...
Flight Controllers
Mamba F722s: www.banggood.com/custlink/vGv...
HGLRC 60a Stack: www.banggood.com/custlink/vDv...
Motors
6s Xilo Stealth Motors - bit.ly/3fdnVqu
iFlight XING Motors - www.banggood.com/custlink/Gmv...
Emax ECO II Motors: bit.ly/34QovLv
Analog VTX/Camera:
Camera: bit.ly/3u2VJQl
VTX: bit.ly/3tiDKGv
TX/RX
TBS Crossfire:
ELRS rx: bit.ly/3CC661m
ELRS tx: bit.ly/3MWPUNc
R9M rx: bit.ly/3COm7Sb
R9M tx: bit.ly/3tst3Bv
Highly Recommended Tools:
Electric Multi-tool: www.banggood.com/custlink/GDK...
Soldering Iron: amzn.to/3q3pXku
Motor Grip Pliers: www.banggood.com/custlink/3Dv...
LiPo Battery Voltage Tester: bit.ly/3u97Ewc
Other Equipment:
My Backpack: bit.ly/3IeyY12
Naked GoPro Hero 8 Case & BEC: bit.ly/3yuWjI5
Naked GoPro 6 Case & BEC: www.banggood.com/custlink/vKm...
Balance Lead GoPro power cable: www.banggood.com/custlink/KvD...
DJI Air 2 S: amzn.to/3wfAxcy
GPS Module: bit.ly/3u3VTqR
QX7 Controller: www.banggood.com/custlink/vDm...
GoPro Hero 9: amzn.to/349z9Ju
GoPro Hero 10: amzn.to/3ILPAyC
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!

Опубликовано:

1 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,3 тыс.

@HectorMartinez 2 года назад

I have no intention of actually doing this but I still appreciate the thought and care you put into making this. I feel like I would ruin the soldering. Excellent flight at the end!

@TRONCATFPV 2 года назад

Thanks! I have alot of videos geared towards beginners and actually just published a "how to solder" video that you may find useful. check it out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2funvs3nU7U.html

@TheRealOrez 2 года назад

You can always practice on dead electronic boards as well. Definitely recommend that before potentially ruining a nice board :)

@TheNerdflixshow 2 года назад

You should try it out first, instead of sabotaging your abilities already.

@Nietsnebarg 2 года назад

@@TRONCATFPV I'm going to give fpv diy a shot thanks to the effort you've put forth in your videos, thanks for the easy sub!

@siawdanielkofi9310 2 года назад

Yh I really appreciate that

@alitatunertc1775 Год назад

This reminds me of building my first RC car in the 80s. Great job for introducing this subject to the community!!

@ridemx1416 Месяц назад

I was too young to build my first hobby grade by myself. I still have it. Back before they came rtr

@morkvakvarkva5381 2 года назад

Are you serious? 150 💰 for hand made? You crazy man😁 In my country for this money we would make a helicopter. Hallo from Ukraine 🙋

@Shish92 2 дня назад

Из богатейшей республики СССР в нищую страну третьего мира😢

@SwoleKitchen 11 часов назад

This didn’t age well

@402carkid9 Год назад

I really want to get into fpv flying and this was the exact video i was looking for. thanks for puttng in the time and even putting the links in the description to make everything so easy! awesome video!

@sharooheel Год назад

Euj❤

@adamcrux6829 2 года назад

Pro tip for making your solder look perfect every time. Always use flux! Even when using flux core solder it help's immensely to flux up the pads and wire tips before soldering and makes the solder joints look uniform and flat.

@TRONCATFPV 2 года назад

Since making this video I’ve started using flux more and it does make a difference. Thanks for the tip!

@Camlspence 2 года назад

Yup, flux is your best friend when soldering RC electronics! I prefer the paste as it's much easier to apply a precise amount.

@dcampbell8779 2 года назад

Also, clean that soldering iron tip. My goodness, my OCD kicked in and that is all I saw when the soldering was going on!! LOL!😮

@Goncalvesbrunot 2 года назад

@@dcampbell8779 That’s exactly what I was thinking. You can buy enough tip thinner to last half a lifetime for $10. In my experience a properly cleaned and tinned tip does WAY more for the quality of solder joints than using extra flux with flux cored solder.

@256alexdt 2 года назад

If you use very very good quality solder often it's not needed to use flux ... when I use cheap solder(Even with flux core because they're not all created equal) I use my flux pen all the time.

@Anthony_Gutierrez 2 года назад

Sweet build, good instructions. I just added all those parts to my cart and its $230 today. Damn economy

@randomdude4304 2 года назад

@@belliduradespicio8009 haha

@zakbrinkhoff324 2 года назад

Wack

@someonerandom2802 2 года назад

Now it's $253.93 Big Damn economy

@smoker308 2 года назад

@@someonerandom2802 I’m ordering my parts now let me know how the tuning goes please

@elchikito2788 2 года назад

It could be inflation, but often when video reviews are done. The item gets popular and prices go up. Blame the person who did the video or you the viewers that went out and bought it.

@da_SpiffR Год назад

I thoroughly enjoy this start to finish build. A great starting point for me since I am an absolute beginner to all of it. I appreciate all the links in the description; you have a new subscriber too! Thumbs up and bell rung. Thanks!

@K4hhny 2 года назад

21:00 damn that dental floss technique is GENIUS!

@taocop1763 2 года назад

I actually never thought about building a drone or even watched vids about freestyle. But now this rly inspired me to start this hobby.thank you!

@Dream4Design 4 месяца назад

same

@PerspectivEs 2 года назад

Algorithm hit the drone community today I guess, lol. Thanks for making a comprehensive guide as opposed to just showing off a parts list like most people, this is sure to get the new ones excited.

@rajhanravi Год назад

Wonderful built man! Kudos to your effort. The camera quality is good! Awesome flying skills!

@overtaker85 Год назад

wow what a great video. Im not in electronics but the way you showed that feels like it's easy tempting to start doing it by myself. Thanks

@JB-po2mv 2 года назад

definitely appreciate the straight forward simple approach. right to the point .great editing .clean build.it looked like it flew pretty decent too. thanks, man. keep em coming.

@TRONCATFPV 2 года назад

Thanks! yea this drone honestly flew alot better than I thought it would since the motors were some of the cheapest I could find haha. Thanks for watching!

@roberthowatson3288 2 года назад

Definitely would love to attempt this. I think some steps are beyond my scope and ability. The software piece seems to have a steep learning curve, and I wouldn't be able to 3D print parts. Really great step by step video with all the details that most others would miss. The cost has always been the biggest deterent to getting into this hobby, but you have reinvigorated my interest. Thank you.

@masonbarr8494 2 года назад

same here, so happy im able to 3D print parts but I will have to learn how to use the software to set it up.

@TRONCATFPV 2 года назад

I’m glad the video helped! I am going to make a betaflight basics video for beginners coming out in a couple weeks so that will helps with any software questions. Keep an eye out for that one!

@sportagus32 2 года назад

If you pay for shipping, I would be happy to 3D print and mail you the part you need, just to reduce the number of deterrents!

@ZT3X 2 года назад

@@sportagus32 how nice of you and @mason Barr looking forward to it🚀 & good video

@professorvoluck9311 2 года назад

I’ve been building quads since 2012 and the software has gotten very complex but quads today fly pretty well on the default settings, which means you don’t have to mess with all its features and fine tuning potentials right away. I still fly some of my old quads from six plus years ago. Keeping up with the latest and greatest isn’t necessary to have fun and it gets expensive. There is a wealth of tutorial information on RU-vid, give it a go! You won’t regret it!

@tokiburoak7457 20 часов назад

What a dope hobby to get in to. Building a drone seems so relaxing and rewarding.

@howey935 Год назад

I’m going to build my own fpv in the new year so appreciate this video

@bcuzicancuellar5478 2 года назад

OMG! One of the coolest vids I’ve seen in a long time. I desperately want to get into drone flying. When I was about 11-12 years old, I built the balsa wood u-control airplanes with .49 gas motors. Lots of fun but nothing like this. Had no idea what u were doing or talking about but loved every minute of it. And that flight vid, WOW! Subscribed…

@TRONCATFPV 2 года назад

Thank you! I will have more videos coming out soon where I break everything down into laymans terms so beginners can understand the parts that go into these drones. Thanks for watching!

@Justin666i 2 года назад

Here's how to solder: when removing insulation you want the wires to keep their braided, always remove more insulation than you need (account for the longer lead) use flux on the lead, making sure it penetrates the strands then tin leaving a bright silvery lead, if it's full or hazy the bond won't be complete. Then clip the lead to length, keeping the strands braided and brush flux and residue with isopropyl. When prepping the pads, use plenty of flux (another trick is to wipe the solder strand with alcohol, it cleans and residue and dirt?) You don't want a gob of solder, just a light tin, use flux and attach lead, you should have a nice even filet around the lead boding to the pad, you should barely be able to see the wire strands, if you can't you applied to much solder. Wipe with isopropyl and spray with electronic surface cleaner. The pull type wire strippers are better than the twist pull types for cleaner insulation cuts and keeps wire strands intact without fraying at the top. The wire needs to be intact and not frayed or hand twisted, keep the original form for better contact distribution. Once you lay down the wire to the pad, you want to do it in one go, so use the right tip and make sure it's clean and lightly tinned with solder.

@DoktrDub 2 года назад

I feel like I should mention this is a good comment, but also some solders especially some unleaded ones do leave a dull non shiny finish but have a good connection, something to keep in mind, and if they do add too much solder to a joint, as long as it’s a good connection and it isn’t interfering with anything then just leave it be and learn to use less next time :)

@AirumFao 2 года назад

@@DoktrDub my eyes was bleeding while he was soldering too

@asad6244 Год назад

Love your picture, Decepticreeps :)

@Ameno-io Год назад

amazing build! I'm new to this and just discovered it, but man now I'm hyped will def. try it out! Thanks for your vids!

@YordanNenov-pn8bc 11 месяцев назад

Great video and realy apreciate the background music and the levels of sound

@IdShift 2 года назад

great tutorial. thanks for taking the time to put this together so well. the beat loop helps a lot too 💪🏿

@TRONCATFPV 2 года назад

Glad it was helpful! Thanks for watching 🙌

@_Wags_ 2 года назад

Learned so much from this video, Video is informative, easy to follow, has all the tips and tricks for setting up the drone correctly the first time! Definitely looking forward to more videos from you!

@TRONCATFPV 2 года назад

I'm glad it was helpful! I'm going to have some more drone build videos coming out very soon!

@hanokil Год назад

Could you pls advise maximum payload of this drone?

@Bodhi1satva 2 года назад

Impressive! I obviously have a great deal to learn and it looks like its going to be a pretty steep learning curve!

@Valisk 2 года назад

Hey, thanks for this video. I had a drone about six years ago, but I ended up losing it. I've often thought about getting back in to the hobby. I love electronics/3D printing projects, so I'm seriously considering trying this build. Gonna have to look into FPV kit!

@RS-lo2zj Год назад

did u build it?

@jnrivers 2 года назад

This looks like a fun hobby. I was not expecting the flight at the end to be so impressive. I'll have to check out some of your other videos.

@InsertHere 2 года назад

Thanks a lot, took me a couple months but i have a fully functional 5' quad! This guide helped me a lot, but couldn't build it with this video only. There are some missing parts

@razorreaper8440 2 года назад

The flips are very aggressive 😳 and it is pulsing like a dragon fly. Nice build

@jacquesb5248 Год назад

you made it look so easy

@youngone697 2 года назад

Damn it brother you have some serious drone skills. You fly that new drone like if u had it for years. Mad respects to the end of ur video you flying that drone at the end is bad ass 💯💯🙏🙏

@TRONCATFPV 2 года назад

Thank ya! 🙌🙌

@djbis 2 года назад

20:57 alone was worth my time spent watching this video. Man, what a nice little life-hack that was! Awesome video. I dig the choice of parts and most specially appreciate the well edited, well shot tutorial that ought to be a great way to encourage new people to join this awesome hobby. Thanks for the hard work!

@TRONCATFPV 2 года назад

Thanks! I have an "FPV tips tricks and tools" video coming out in a few days where I cover that dental floss trick as well as a couple other things that have helped me when building FPV drones 👍. Thanks for watching!

@djbis 2 года назад

@@TRONCATFPV I'm here for it! #subbed

@projato 2 года назад

YesYes

@piercejordan2518 11 месяцев назад

@@TRONCATFPV How do you get the drone into beta flight? Is it necessary to take it in the beta flight.

@jaysbrowseraccount 5 месяцев назад

Looking at all the methods and tricks he used you can tell he is skilled

@JonathanBaileyn2u 10 месяцев назад

I just went to my first airfield to watch hobbiest fly… I’m hooked after taking a try… but I’m a builder… so this video really helped spice my interest up !! Ty

@indrakheela1715 2 года назад

you gave a best guild for everyone im happy with this viedeo

@kablamo554 2 года назад

Excellent video, very cool man! Something I would suggest for your smaller wiring considering the PCB terminals have the holes in the board is strip and tin the small wires then stick them into the terminal holes on the under side then proceed to solder them on the top on the board it'll give you a stronger mechanical connection and help tidy up the board as well! Looks great otherwise!

@TRONCATFPV 2 года назад

Thanks for the suggestion!

@christopherdickinson4291 2 года назад

I concur

@littlejackalo5326 2 года назад

Those are not holes for wires. Those are heat sinking vias. Those jokes are not meant for wires to be inserted. The edges of the board use castellations for the wire to be placed in.

@danielwhyatt3278 2 года назад

Yeah that’s a good shout out. I haven’t done any soldering in quite a long time since I was in school, but I remember using a soldering iron through circuit board holes was much more efficient as it keeps it more tidy and means the connection is generally stronger, even if the cable has to bend closer to the connection point if you are wanting it to lie down flat.

@connorshamlian5185 2 года назад

Hey man great video! I’m building my first drone and using this as a reference. I know nothing about drones for building them, or configuring or flying them lol. I hope I learn a lot along the way. So far I have the frame,motors, and props

@TRONCATFPV 2 года назад

I’m glad this video can help ya along the way! If you have any questions along the way please don’t hesitate to reach out!

@zaytele5094 6 месяцев назад

i swear this is freaking awesome

@einwilderzwerg4288 Год назад

oh my gosh finaly i see a video of a guy making a cheap fpv racing drone without every link being not working! thank you

@anthonyjones9900 9 месяцев назад

New to the hobby and wanted to start by building my own, this is a perfect introductions, much appreciated! Parts have started coming through today!

@fredfred2363 2 года назад

Just found your channel. As an old electronics designer, i'd love to get into this. The only thing you gloss over without much detail is the programming and setup config. Seems to me that that is the bit where you need to understand what and why... The physical build looks just like a model kit build, where everything naturally goes together quite easily (assuming you can solder and use a screwdriver). You see, i'd have just unsoldered the wires to get the motors to run the right direction.... Nice vid. Subscribed 👍🏻🇬🇧

@simpl3lang 2 месяца назад

Yep....got me all confused in that section 😅

@your_boi_junior4531 Год назад

Done subscribed, amazing video. ( Haven’t build it but sat through and watched ever part of it)

@royjohnson2988 2 года назад

Wow Great job, You are one kind of a guy, Couldn't wait till the end to see you fly it, well done...

@everlastingmedia Год назад

necro maybe, but you might design and print some landing buffers out of TPU for softer landings in case you cut power a few inches above the pavement. You could also try printing TPU pads for reinforcing / protecting other bits on impacts/crashes.

@TRONCATFPV Год назад

We ended up printing tons of parts for this build. Theres so much stuff out there for the apex frame that fit this one 👍

@intensegamer7559 2 года назад

Nice build. I‘m running 2205 2300 kv Xing motors in a 4 inch Apex 6S configuration. Way lighter and quieter than a 5 inch. Lots of fun, too. Cheers

@0oo033 2 года назад

What's your flight time with those motors?

@intensegamer7559 2 года назад

@@0oo033 Between ~3 and ~7 minutes depending on battery size (550 - 700 mah) and flight style (ripping like crazy - lazy cruising). Very often a bit below 3 minutes and very rarely close to 7 XD I run them on blheli 32 ESCs (Mamba F722 mini mk3). Cheers

@0oo033 2 года назад

@@intensegamer7559 ok thanks!

@thorboyo Год назад

10/10 for the wire tips !!

@everythindrone2092 Год назад

This is actually quite inspiring I am going to give this a go thanks for the informative content.

@Julian-yx4we 2 года назад

Wow, thank you for this! Really appreciate a more or less “idiot-proof” video instruction and full parts list! Liked and subbed!

@TRONCATFPV 2 года назад

Thanks 🙌🙌 glad the video helped!

@caveymon 2 года назад

Just one comment: you've got two antenna's on the rxsr for diversity reception. You should have put one on either side of the central stack, instead of on just one arm together :D Otherwise, excellent build. Great editing, and easy to follow.

@danoid7998 2 года назад

doing this this week. Thank you.

@imkavindu 10 месяцев назад

This is a really cool video. I don't have much knowledge about DIY drones. But this actually made me DIYing one!

@vektr6278 2 года назад

The emax eco ii motors are a good low budget choice. I dont recommend flying around cars for maiden, never know when things could go wrong after fresh build.

@TRONCATFPV 2 года назад

Agreed! I just added the eco ii motors to the description! This wasn't the drones maiden flight, we flew it in a park beforehand. This flight is after making sure everything was working good. Thanks for watching!

@The1188am 2 года назад

Bigger motor = higher ESC specs.

@mr.animegod_yt 2 года назад

@@The1188am so the recommended esc wouldnt work with the upgraded motor?

@BowOneFire 2 года назад

@@mr.animegod_yt it would, the mamba esc in this video should be able to handle emax eco ii just fine

@dalewhitmore143 2 года назад

Thanks for the video I never knew these things were so modular and easy to build, I'm sold. Question is what is the price for an entry level controller that doesn't feel jank?

@TRONCATFPV 2 года назад

This is a great controller for under $99 www.banggood.com/custlink/KKmhbOi1Aa

@jackhartsough3 2 года назад

Amazing piloting skillz

@Dartheomus Год назад

Amazingly thorough video. This is exactly what I was looking for!

@TRONCATFPV Год назад

Awesome, i'm glad it helped!

@stevefpv4669 2 года назад

Wow! Many many thanks for putting this video together man, very good breakdown to get started, I was sitting on parts I ordered, this should get me where I'm going! Still working on that frustrating acro nightmare on sim and meteor75, hope it is possible to learn that dark art and get to fly decent eventually, feeling so lame, my 9y old son seems to pick it up faster than I am ;-( :-)

@TRONCATFPV 2 года назад

Haha you'll get there! Hope this video is able to help ya get yours together! 🤙

@JacobSnover 2 года назад

Awesome build! I ride off-road a lot and wonder how hard/expensive it'd be to make this into a follow drone like the skydio? Cool build though either way!

@TRONCATFPV 2 года назад

I'm not sure how a follow me function could be added to an FPV drone. I'm sure it could be done though!

@ArmTheCreative 8 месяцев назад

Looks like so much fun once you know what you are doing.

@lucasfrancisco537 9 месяцев назад

I’m so excited to build my own drone. I like the challenge

@petarcuber2504 7 месяцев назад

What controller do you use with this drone

@RokDAWG1 8 месяцев назад

Wow this is so awesome! You seriously crushed it! I would love to be able to do this!

@lazydachshund 2 года назад

Thanks for the in depth video! Keep up the great content!

@DiogoSantos-ln1nz 2 года назад

I was considering buying the Emax Tinyhawk II Freestyle as my first drone, but I would definitely prefer to build my own as I already have the tools. You think something like this would be nicer?

@TRONCATFPV 2 года назад

I think starting off you would probably be best with the tinyhawk. If you get the package with the controller and goggles you can use those goggles with any analog drones you get in the future. Also, the tinyhawk is relatively durable and is actually alot of fun for its size. I would recommend going with the tinyhawk then eventually upgrading to a simple build like this. Hope this helps!

@Olafaloofian 2 года назад

I started off with the Tinyhawk II and I'd recommend that to all pilots new to FPV. It's super durable and can be flown inside which is a ton of fun!

@johnzapata8954 2 года назад

Hey thanks for the wonderful upload. Couple questions. Instead of the 20x20mm flight control and the 20x20 vtx… could I just use a 30x30 flight controller and 30x30vtx? Or a 30x30 flight controller with a 20x20 vtx? Hopefully I’m making sense with my questionslol Also, the Mount for the fpv cam, was that also 3d printed? Could you provide the specs that please?

@TRONCATFPV 2 года назад

Absolutely! Only reason I went with 20x20 was because of the quality of the stack and the price that I was able to get it for. the 30x30 stacks are typically more expensive. you could definitely do a 30x30 FC and 30x30 VTX as long as you can mount it on top of the FC. the rear holes on this specific frame are 20x20. So the camera that I went with is a nano. it came with an adapter for nano to micro but the frame I'm using holds a mini camera. so basically I have two brackets on there holding it on lol. the bracket that came with the camera and one that is 3d printed. I just posted a link to the adapter I used in the description (www.thingiverse.com/thing:4070488). Hope this helps!

@johnzapata8954 2 года назад

@@TRONCATFPV nice! Thank you for that link! So I can use a 30x30 fc with a 20x20 vtx as long as the vtx is mounted at the bottom?

@TRONCATFPV 2 года назад

If by bottom you mean the rear of the drone then yea that would work perfect 👍

@johnzapata8954 2 года назад

@@TRONCATFPV yes, that’s what I meant lol thanks again!

@BlackMamba-lt8oe 2 года назад

@@johnzapata8954 ron zacapa

@HellSolo 2 года назад

Excellent work!

@bobstovall9570 9 месяцев назад

I truly enjoyed watching this build video. I'm not an electronics guy but have always been fascinated by and, somewhat, drawn to the field. I'm an IT Geek by trade. I'm looking forward to viewing much more of your work. I think I can see a way to get my 9-year-old grandson hooked on this technology which I hope will draw him into other technologies in the bargain.

@aaryanx1809 2 года назад

Bro, It was completely awesome. Can you tell me what is the max range of this drone? And up to what max time it flies in one charge?

@TRONCATFPV 2 года назад

flight range and time varies depending on what battery and receiver you're using. On this build with an XM+ and 1300mah battery we were getting about 1km range and about 4 minute flight times. Thanks for watching!

@satyamevjayate2123 2 года назад

@@TRONCATFPV what battery should I use if I want to get flight time 15-20 mins on the same build.

@anthonyvega155 2 года назад

@@satyamevjayate2123 just buy 4 batteries then haha, you'll see lots of pilots bring multiple batteries to practice/any other application

@BasicBrick 2 года назад

@@satyamevjayate2123 this is a fpv drone they dont fly that long because of how fast it flies

@Solidmorph 2 года назад

Id like to get in to the FPV drones world, in order to complete the build Im guessing a set of goggles are needed and some kind of controller. Could someone point me in the right direction? Thanks.

@jordanbentley 2 года назад

joshua bardwell

@UrbTac-7 Год назад

As a beginner in this I love this budget build

@graspinginfinity7655 Год назад

Nice. Thanks for the parts list

@clutchclan3569 2 года назад

I would do this if I had 300 dollars to spare

@Marten_vls 6 месяцев назад

But the controller? And the battery? If you include these prices its still like 500$

@GarrettBShaw Месяц назад

You can get a couple batteries for $50 to $60. You can get a good controller, radiomaster pocket, for $55 (Edit: $65 for elrs plus shipping) (pre tax) Finally a budget pair of FPV goggles for a $100. Additional $215 in cost. Grand total: 150+215= $365 (Edit: $375 elrs radio)

@cubingwithnick Месяц назад

He never said rtf 🤦‍♂️

@cubingwithnick Месяц назад

And most drones are over 250

@xXEshanXx Месяц назад

@@GarrettBShawwhich goggles costs 100 ? Ahahah 😅

@ItzBoshNet Год назад

i was just searching for how to videos to learn something new. Found a very pleasant one thx dude!

@TRONCATFPV Год назад

Glad I could help!

@neilclay5835 11 месяцев назад

Love the grommet trick

@brianfpv Год назад

Planning on building this 🔥🔥🔥

@robertwilliams7090 Год назад

Wow you are the man!! Thank you!!

@andrewshakurov1935 Год назад

Thanks! I enjoyed the video and definitely picked up a few new things for myself.

@paullewis8569 Год назад

def gonna need a 2022 version of this video!!

@TRONCATFPV Год назад

Keep an eye out in the coming weeks 😉

@smilingxassassin 11 месяцев назад

I saw this now the inner child want a new drone and I'm hooked at FPV drone's thanks for the insight sharing & I'm just starting off and OMG this is gonna put some punctures holes in my bank account but no worries I'll use good old trusty ducktape.

@ryanowen1118 11 месяцев назад

I wish every video was done this well. thank you!

@SuburbanBeard 2 года назад

i had no idea this was a thing! i am so excited right now

@vincentevans7730 2 года назад

I will love to buy that same exact one!

@robertoshea6227 2 года назад

WOW MATE REALLY IMPRESSED WITH YOU… GREAT KNOWLEDGE AND SKILLS GONNA TRY AND GET MYKIDS TO BUILD THEM… THANKS

@dozzborn2118 2 года назад

Definitely doing this

@johnhardesty79 2 года назад

Badass flying!!

@NiftyNodes 2 года назад

I really appreciate this vid. Seemed like most these things were in stock and you had a back up list which is why I did this one. Used your links for all my purchases. Hope it helps if only a little!

@TRONCATFPV 2 года назад

Thank ya! Using the affiliate links always helps 🙏🙏🙏 Glad the video has helped!

@kcchiok Год назад

your pilot skill is amazing

@garethwalker9414 2 года назад

Quality vid brother 👌

@judas74205 8 месяцев назад

Great video! It encourages me to build my own in a near future. I am still in Sim mode though and cant wait. I will follow you for future advices. thanks for the video again thumbs up all the way and you earned a subscriber.

@nda_77 Год назад

How amazing is thisss👏🏻

@CheffHD 2 года назад

thanks bro really inspired me to build my first drone

@scotthoover6689 Год назад

Wicked! Love it man. I need to build one badly. Thanks

@Long_Snap Год назад

This was super helpful for me, this was my first every try at building my own fpv and this vid help a lot

@TRONCATFPV Год назад

Glad it helped!

@YuriyPohranychnyy 11 месяцев назад

Awesome test flight!! Thank you

@georgehernandez9131 2 месяца назад

Cool stuff bro!👍👍👍 good video lots of knowledge smart guy 😎

@rikvah9817 Год назад

That's so sick! Great video

@salmonbuiltdesigns8984 2 года назад

You're an absolute legend! Thank you sir

@CHARDIEMOTOVLOG Год назад

im enjoying watching and getting ideas

@gratchgratch7919 2 года назад

Wow that was cool especially the end

@dr.andreasdanner6795 2 года назад

Excellent job!

@MiBrCo4177 Год назад

this came up in my feed and the entire time all i can hear is Kirby sucking in air to destroy his enemies lol. 10/10 would watch again, plus it's a cool af vid! great job! this makes me wanna get a drone or build my first one ever.

@user-uw3nx3bc7p 2 года назад

great video, I do not understand English well, but watching how you put it together and did a piloted test was very interesting, you fly the doron very well, a real ace