Build a MOTORIZED monitor lift (on a budget!)

Подписаться 4,6 млн

Просмотров 2,7 млн

50% 1

In this video we'll be building a motorized lift for your desk setup, all on a tight budget!
OFFICIAL LINKS:
Support me on Patreon: / diyperks
Official Website: www.diyperks.com/
Discord: diyperks.com/discord-server/
Forums: diyperks.com/community/
Twitter: / diyperks
Parts links:
Disclosure: These are affiliate links. If you click them and make a purchase from the various merchants they link to, DIY Perks may earn a commission. Affiliate programs and affiliations include, but are not limited to the eBay Partner Network and Amazon Associates.
Motor: rover.ebay.com/rover/1/711-532...
Bracket for motor: rover.ebay.com/rover/1/711-532...
Pulley for motor: rover.ebay.com/rover/1/711-532...
Smooth Idler Pulleys: rover.ebay.com/rover/1/711-532...
Pulleys for threaded bar: rover.ebay.com/rover/1/711-532...
Timing Belt: rover.ebay.com/rover/1/711-532...
Threaded Bar (this one is UK only): rover.ebay.com/rover/1/710-534...
Locking Nuts: rover.ebay.com/rover/1/711-532...
Captive T Nuts, also called 'blind nuts': rover.ebay.com/rover/1/711-532...
Switch: rover.ebay.com/rover/1/711-532...
Legend has it that the schematic is available here: drive.google.com/file/d/1gZTO...
Tags: monitor, lift, desk, pc, setup, tv, diy, build, make, pin, how to, mechanism, motorized, project, electronics, guide, matthew perks, diy perks

Хобби

Опубликовано:

6 апр 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,4 тыс.

@DIYPerks 7 лет назад

Wow, you guys are totally obliterating that like button! Thanks a lot! Let me know if you have any questions about the project and I'll answer them in an FAQ section amended to this comment.

@DarrenDIY 7 лет назад

DIY Perks very awesome

@gloggare 7 лет назад

awesome build, to bad the lid was manual... 2.0 perhaps :)

@ro734 7 лет назад

DIY Perks is it possible to make it faster, seems a bit slow for my taste

@cameronb8503 7 лет назад

Do you think that I could use this to lift a motherboard tray out of a custom PC case? I have considered doing that for repair ease of access

@shajarali6252 7 лет назад

DIY Perks Awesome built, can you share which components should be used for a more heavy duty setup?

@damonmay7752 7 лет назад

it only costs like 45 bucks usually when RU-vidrs say cheap it's means around $700 impressed

@comradesky5931 4 года назад

Plus a day half day of work…

@Florizk 4 года назад

Exactly! Now THIS is what i call cheap and real! (Also i did my first ever restauration video on my channel, would be great if some of you gave it some thoughts and ideas, tips or tricks! Thanks in advance, see you on to the next one!

@moa132 4 года назад

@@Florizk you're advertising your channel on a 3 year old video

@Florizk 4 года назад

@@moa132 never know.who stops by!

@jackleihs499 4 года назад

@@Florizk i will take a look

@island03z 4 года назад

You're the only one that shows a mechanism build instead of buying an expensive device. Bravo, sir.

@Z_place_holder1234 7 лет назад

now just add Alexa support and you can just say "Alexa, turn on my PC." and it will rise in glory

@gamdslngr1008 5 лет назад

Arduino or Sonof will add the ability for voice commands through Alexa

@bland9876 4 года назад

Why not say Hey Cortana can you turn on my computer after all your computer has Cortana on it not Siri

@MrAirbleed 4 года назад

Thats what great scott say in paralel universe

@basementbuilds 4 года назад

@@bland9876 Because your pc has to be on to use cortana

@patricknally1177 3 года назад

@@bland9876 What if he uses linux

@LTT.Official 7 лет назад

This channel is the definition of Quality over Quantity.

@AnthPerri 7 лет назад

love this! I would love to see a desk lift too! [sitting to standing]

@stuff5056 7 лет назад

That would be cool.

@gabesennheiser 7 лет назад

with 2 more motors and rods i bet it would work well

@norwik 7 лет назад

I think a thin (maybe spring loaded) piece of matching desk plywood will do... Monitor should lift it easily.

@Drunken_Hamster 7 лет назад

One more motor and two rods. But it might take 4 motors. IDK the load limit of the motors but guys are saying that those two bearing will easily take 100kg together even though they're the wrong type for this application.

@AnthPerri 7 лет назад

Drunken Hamster awesome, thanks!

@sheepiscool 3 года назад

This would go perfectly with the pc-in-a-desk desk!

@djmips 3 года назад

I think he has something up his sleeve for that....

@sheepiscool 3 года назад

djmips This video is 3 years old...

@RANDOM-nl2mg 3 года назад

@@djmips he always does 😂

@iridium8562 3 года назад

DeathForce Airsoft well after watching the latest video, i confirm that..

@frankowalker4662 3 года назад

You would see the monitor and all the wood under the desk. LOL.

4 года назад

"Coolest desk in your neighbourhood" More like in a 100km radius.

@stevethea5250 3 года назад

Jillene Magill-Lewis, R.Ph. Based in Washington State, the author writes frequently on health-related subjects. TIPS TO REMEMBER: Clarinex Dose adjustments are necessary for patients with hepatic or renal dysfunction. Clarinex is contraindicated in patients allergic to it or to Claritin. Patients may take Clarinex without regard to meals. The most common adverse reactions during trials were throat irritation and dry mouth. Drowsiness is possible, especially if patients take more than the recommended 5-mg daily dose. Tachycardia was reported in some patients during foreign marketing of the drug. Jillene Lewis. Will Clarinex take over the mantle of Claritin?. Drug Topics 2002;2:15.

@hahahhaha8146 3 года назад

@@stevethea5250 ??????

@bodimullen5204 2 года назад

What am I reading

@John3K21 7 лет назад

I think it would be really cool if you gave a tour of (parts of) your home with all of the diy's throughout it. I'm sure you have a bunch, and not only would it make for a fun video, but it would also be a great example for a great direction that people can go with their diy's over time.

@julianpiper240 6 лет назад

I love your content and how you don’t have a long and obnoxious intro scene. Just simple, clear instructions and voice overs. Love love love it!

@dorandan100 6 лет назад

The screw + washer bearing mounts are brilliant. Anytime you can avoid a custom bearing and go with cheap standardized one, like skateboard bearings, you can save big bucks. Your method of mounting them simply and cheaply is the real find for me - Thanks!

@Nut_Banana 5 лет назад

"Holy moly, It's a little bit wobbly" You broke me really, but this lift is awesome

@ComputersAndTechAndAndrew 7 лет назад

When i watch your videos i have filling like i watching " How it's made " series :D

@Space. 3 года назад

Hi andrew

@hahahhaha8146 3 года назад

Andrew is here guys!!!

@nonowords7857 3 года назад

I love both yours and diy perks videos! You guys are legends. Cat's videos are also awesome!

@brownmuta7537 3 года назад

Literally just thought the same thing and that's kinda awesome though

@I_killed_that_beard_guy 3 года назад

Hey I watch your videos with 90% isopropyl alcohol

@techydiy2378 7 лет назад

Colin Furze version .... jet engine, no limit switches

@kalleklp7291 7 лет назад

He'd put the whole damn desk on wheels and add a ramjet engine. World's fastest work desk...🚀

@TypicalNerds 6 лет назад

I agree and he would get a world record WORLDS STUPIDEST AND FASTEST WORK DESK THAT GOES TO SPACE IN THE PROCESS

@fergusyoung6782 6 лет назад

How to never see your monitor, keyboard or mouse EVER again. its like magic!!

@eugenearella6189 6 лет назад

The monitor rises with a jet engine!...

@jameswalker199 5 лет назад

@@kalleklp7291 *pulse jet

@jamesdevlinalexander8460 6 лет назад

This guy is a freaking GENIUS!!!! I love this type of stuff. I love the way he made the limit switch circuit, couldn't have made it more simple, this is as simple as it gets. You sir have gained a new subscriber!!! 😊

@GuitarSamurai17 7 лет назад

i love this channel, best diy vids youtube!!

@elaineseney6183 6 лет назад

Exodarion j

@pcarrierorange 7 лет назад

Wow, I had the Stingray "Standby For Action" tune playing in my head while the monitor rose, like the reverse town-sinking scene... Awesome!

@dgentertainment9302 7 лет назад

Have been looking for a DIY idea for a sit/stand desk. Love how budget friendly this option is, wouldn't take much to modify the design to make it sit/stand vs being a magician.

@technic23 Год назад

I am too! Have you gone Forward with the Idea?

@tn9274 3 года назад

His channel is so underrated with not too many subscribers given so many creative, fun, and quality ideas and efforts he pour out.

@horatioswrld 3 года назад

I just found this channel like a month ago. There are better maker channels, there are better makers, there are better channels. The one think Matt has over literally everyone is the utter sheer joy he has in ever video. Which is why I like making things! It’s fun! My things aren’t the best, not done the best ways but it’s fun cause I solved a problem and that’s why I like watching maker videos! Love ya Matt.

@pg1171 5 лет назад

Wonderful idea! I do like PJ's idea of a board that will flip back out of the way on opening, and close down on lowering, creating a smooth, uninterrupted surface. It would also help to keep dust accumulation down somewhat. It would add a little bit of complexity, but it would possibly be worth the effort. Great job! You deserve way more subscribers!

@loonymiko 7 лет назад

You can try building a frame around the monitor so you can avoid having to place that plank of wood every time you lower the monitor. The frame can also act as a shelving unit for small objects or books. Awesome project man!

@bennylofgren3208 7 лет назад

Michael Lee My thought exactly! That would even look cool. You can have your cactus collection on the shelf or something. :-) (Cactuses? Cacti? Collection of prickly plants! There, nailed it.)

@kangkim150 7 лет назад

Succulent

@Daunlouded 7 лет назад

Then he would have to clear up that shelf to get the added workspace. This is about getting more space, not about hiding the monitor and other accessories.

@midassandahl5076 7 лет назад

A board ontop would look pretty tacky. A better solution would be just mounting hinges to the plank so it would just get pushed out of the way and automatically close when lowering/raising the monitor

@SimpleComplicity 6 лет назад

It is a budget version and it fulfilled it's purpose just fine, but I like that idea!

@MsBettyRubble 7 лет назад

You are amazing!!! Your channel is my absolute favorite.

@CriticalRoleHighlights 4 года назад

I thought about attaching the extra plank to a piano hinge at the back so that it acts like a lid and then make an aesthetically pleasing frame on top of the platform that acts as a lever that pushes it out of the way when the platform rises and lets it back down gently when it lowers again. It wouldn't cost very much to add something like that. Luxury model: add an extra smaller motor connected to the switch that runs the lid itself with a relay of sorts to delay the signal so that it doesn't lower the lid too early when lowering the platform.

@sianifiction 7 лет назад

This is so cool! It would also work with things like sewing machines, I'm forever having to move mine on and off my desk and with two of them it can be really annoying and now I'll have a proper place to store them when they're not being used 🙂

@mafq53 2 года назад

Did you ever figure this out for your sewing machines?

@PJPEE 7 лет назад

If you put the platform on top of the monitor, it will close the gap itself

@Maffinnator 7 лет назад

Yeah but it is ugly ... he could make a bord, which flips back, when the monitor comes out, and flips over the gab when the monitor goes down

@PJPEE 7 лет назад

Maffinnator that is true. Although a hinge or other mechanism would have to be attached to the wall and the board may get in the way of space necessary behind the monitor

@chex4923 7 лет назад

Maff Yes, but having a wood block on the side of your desk would look weird

@raja777m 7 лет назад

not necessarily, you can add a bonsai, or google home, or wireless lightweight speaker on to the top shelf. On the desk is brought down, it acts like rest of the table, and have those above mentioned items.

@raja777m 7 лет назад

that was the first thing that came to my mind, but after watching the video, I changed my mind from it :)

@Benn25 5 лет назад

What a wonderful project! perfectly executed. You can also put the upper shelf (the one you use to close the hole when the monitor is down) permanently with the elevator, using some kind of columns, and the whole thing will go up and down. Even more handy and neat!

@pw.70 Год назад

Using this idea to put a TV in my daughter's cabin bed. Brilliant job - thanks Matt!

@nshezz8562 7 лет назад

You sir make me want to create anything! Thanks for the video.

@BishyFTW 7 лет назад

could you attach the plank of wood to the wall with hinges and have a piece of string attached to it and the platform, cut to the right length so when it hits the bottom it pulls the wood down closing the gap automatically?

@MillionaireDubMind 6 лет назад

Holy moly your videos, I just realised, are amazingly dedicated to detail! Enthralling!

@HannahRoot55 Год назад

Yeah

@HowlingWolves77 6 лет назад

I just discovered your videos about 30 min ago and now I can't stop watching... WHAT HAVE YOU DONE TO ME?! These builds are freaking awesome!! :D

@ChiefFabio 7 лет назад

Such a talented boy

@SuperBillybabe 2 года назад

Awesome, probably consider attaching the panel permanently to the lift with aluminum posts wood posts etc., so whenever you hide your monitor it automatically attaches your panel.

@HannahRoot55 Год назад

Varela

@jackavery3740 Год назад

I'm now working on scaling this mechanism up for a rising desk leg design. Thanks for the inspiration, you've just very much so earned a new subscriber!

@antruys646 4 года назад

found this man around a week ago. Could listen to this man narrating quite literally anything. Not to mention the builds are neat too

@SianaGearz 7 лет назад

The timing belt is likely made out of chloroprene rubber with carbon pigment and reinforced by cord such as Kevlar. You could glue angle cut ends of the belt together using Contact Cement, which is a glue that consists of chloroprene rubber dissolved in volatile solvent, that should weld it together like it was made in one piece. Additionally you could take some thin synthetic cloth and glue some of that along the back side of the seam with contact cement to reinforce it, or maybe a piece of bike tubing. This is not tested by me, just an idea.

@DIYPerks 7 лет назад

Thanks for the tip! I will try it at some point.

@fd3871 7 лет назад

they actually make specific mechanisms to do exactly this cdn.thingiverse.com/renders/77/87/f7/ca/82/clampy_preview_featured.jpg

@SianaGearz 7 лет назад

Alexander Fagard that works in a machine where the clasp moves along the axis opposite whatever it's supposed to be moving along, so the clasp never hits the pulley, because the range of the belt motion is less than half the bell's length. In this build, the belt is used in an unusual manner and for the complete range of motion, the belt must take dozens of turns, and the clasp will be hitting the pulleys. Like uhhh, the platform travels 1.25mm per revolution of rod, a pulley has 16-60 teeth, let's say it's 20, with a pitch of 2mm, so to get the monitor to travel 40cm, that's 320 revolutions of the rods, or about 13 meters of belt motion, and the desk is obviously less than 13 meters long, so you have a problem. If it was me I probably wouldn't bother with belts at all and would synchronise a bunch of stepper motors instead. Apropos that, it shouldn't require any microcontroller work. Just a $1 stepper driver from a 3d printer and a 555 circuit to give it step pulses. But the motors aren't cheap unless very slow and very wimpy is fine, in which case there is 28BYJ-48 toy stepper which needs to be converted by cutting out a center tap. But no, I wouldn't support a desk on top of those, but it would be fine for a camera slider.

@fd3871 7 лет назад

yea i see what you mean, didnt fully think it through

@craigroberts5965 7 лет назад

I think I'd have bought an endless timing belt at roughly the correct side and worked the mechanism dimensions around that.

@spicymemeboi2646 7 лет назад

4:48 DEEZ NUTZ!

@vartiksingla8416 7 лет назад

Moritz Hanschen these nuts..😂😂

@benjilaunchpad5736 7 лет назад

LOLOLOLOLOLOLOLOLOLOL

@delcambekevin 7 лет назад

went right to the comment sector when i heard it XD

@Koutsn_ 7 лет назад

They must also be strong nuts, they support the entire weight of the platfrom after all

@neoqueto 7 лет назад

I can't stop laughing lmao

@Spykersan 6 лет назад

Part of the fun with DIY projects is thinking of extra things that could potentially be done. Like perhaps attaching the extra board right to the whole set up, that way it'll lift when the whole thing lifts, giving a sort of shelf when in the raised position, which could then potentially allow you to add some lighting.

@tamyhanafi456 4 года назад

Simple and smart..good job👍🏻👍🏻👍🏻

@JyLMGroup 7 лет назад

New vid. FINALLY!

@sarasagar76 7 лет назад

you are awesome man... big thumps up 👍

@leslielandberg5620 2 года назад

I'm converting my shuttle bus to a live work rolling studio and need to hide my electronics and iMac away under the counters! This is perfect, thanks so much.

@gmc07joe 6 лет назад

This is a amazing production, thanks for sharing!

@EthanMLego 6 лет назад

Its about $45 USD, to purchase all of the parts.

@marecek223 6 лет назад

Thanks, i wanted to look at it but im too lazy xd

@EthanMLego 6 лет назад

Lol

@user-pe5pq1wq6c 5 лет назад

SAAAAAAAAAAAme

@cebelicaklara 5 лет назад

Thx

@oxoConstantinEoxo 4 года назад

For 45 bucks I can buy a while desk already hihi

@jonvdveen 7 лет назад

Watched three seconds and then subscribed.

@kreuzbergligokhan3256 6 лет назад

Jonathan Vander Veen You are right , this channel includes really well good videos and thinks.

@deepchill1397 3 года назад

the best part for me was when i caught you saying "DEEZ NUTS'' at 3:50 lol🤣

@Davvybunns 4 года назад

Dude your the man , good job and well informing you the audience, lots a luck on future builds . 👍👍👍👍👍

@pavanshinde6762 5 лет назад

"Schematic and wiring will be added later." Can you please add these?

@ossenhoresdofraque3324 5 лет назад

He forgot... damn it!

@Ed19601 5 лет назад

The switch is simply reversing the polarity, but it won't work without adding some diodes arduinodiy.wordpress.com/2019/03/24/using-limitswitches-with-diodes/

@dickzhard7379 5 лет назад

@@Ed19601 thanks, very helpful...

@jzbreezio 4 года назад

lets see if he sees another request for the schems.

@mohitmethi1185 4 года назад

Hey bro i think you live in india if yes then can you tell me which motor should i use for this project

@BStark00 6 лет назад

really! I though this like 5 years ago but never done xD, Thank you ! now I have a better idea how to do it :_)

@DanteYewToob 4 года назад

This is a good idea, I tried this a few years back with an old window mechanism from a car, I kept the switch and everything so I'd "roll up" my monitor, but it died after just a few uses because the scissor mechanism wasn't too efficient at the bottom of the stroke and my monitor was a bit too heavy. I might try this one out, since my computer desk doubles as my crafting and leather work station and I have to work around a bunch of crap. Thanks again for the inspiration! "Calmin' Furze" Strikes again!

@ominoustoaster 4 года назад

Thank you so much for making this video! I thought of this once as a concept and seeing this irl is really cool!

@wingedsword93 5 лет назад

Came here for the budget build for my desk, stayed for that silky smooth voice

@slartibartfast4260 7 лет назад

"If that's not cool, I don't know what is" :D

@Skeptycal 6 лет назад

Very cool! I was looking for something exactly like this for adding a TV to my RV retrofit. The original TV was a huge tube one from ages ago and I thought replacing the table with a hidden LED panel would work well. Thanks for sharing this.

@Michael_NL 7 лет назад

This is why i am on RU-vid! Amazing build and GREAT explanation! Saved for later use! Thanks a lot man!

@HannahRoot55 Год назад

Michael

@drakemasta9655 7 лет назад

what about making the lid have a hinge so the top of the monitor opens the cubby as it rises?

@vuurwekbeer8031 7 лет назад

So how about that schematic?

@geokandas 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-id5usTwHwtY.html

@King12Daniel 3 года назад

I've been looking for something like this for a long time! Thank you very much 😊

@mrb8467 10 месяцев назад

Wow this is amazing. I was looking for something like this for our dual monitors at home to stash away on the weekend and make the room look cleaner. Definitely have the skills to make this! Thanks

@j1nchuika 7 лет назад

Could you do a kit like the one you did for the PC case? It looks so awesome!

@Alex-oz9eh 7 лет назад

Luis Contreras ikr

@aayushs.3935 7 лет назад

Luis Contreras v

@BryantBeers 4 месяца назад

Do you have an updated parts list? It looks like the ebay links are dead.

@MrMyleys 4 года назад

Just watched this again! SOOOO love this idea! Gonna do it with my TV. Thanks for the inspiration!

@Spavocado 4 года назад

A tv can be a bit too heavy for this motor so try putting a counter weight to ease the lift

@koushikkumardey6069 4 года назад

Just amazing,awesome, extraordinary, fantastic, mindblowing 🤯

@DanteYewToob 4 года назад

Why not make that cover an automatic hinged cover? Just throw some cheap piano hinge onto the board, make it hinge behind the monitor on the wall side, and put a little arm on the moving platform that pushes the hinged cover out of the way as it rises so the monitor doesn't hit the hinged door. That way, it automatically covers and uncovers itself with no extra mechanisms or moving parts... just a simple hinge.

@makproductions06 7 лет назад

"Since this is a simple DIY build" hahah.. just as I was thinking, "man this is complicated."

@HannahRoot55 Год назад

Hey Matt

@MusicDAH91 6 лет назад

You make some seriously cool gadgets! They appear to be extremely well made too. Keep up the great work!

@GLACIOUS13 4 года назад

I've been waiting for this since I built my first PC! Thanks!

@mindseyerobot 7 лет назад

this is just straight up pimp'n.. i however would do it with a liquor arrangement instead of a monitor

@alyssa2242 Год назад

What are the specs of the motor you used? The links in the description are dead.

@jrose2533 5 лет назад

This was my accidental watch I don't even know your channel exist until now and I got hook on it automatically. Dude you just gave a ton of ideas on how to improve my entertainment center and my computer build I like what you are doing keep it up and I'm a forever fan. Please include all the parts and schematics specially the electronics I'm not an electronic savvy kind of person but I try to learn. Thanks again love your channel keep it up...from New Jersey fan.

@carlangeloaposaga7377 6 лет назад

I love how your brain works, brilliant. Love your vids man

@yoma8798 4 года назад

0:36 dammit, i thought someone really knocking on my door. pause it for a second and there's nothing, hit 'play' again and i thought someone's knocking again at 0:39. replayed the part and it's relieving.

@ozarkhillsrt9610 6 лет назад

I love this! I'm gonna use it to hide my TV in my camper. Thank you and God Bless you.

@ashleybuccaneer985 4 года назад

I'm doing the same now but need the schematics badly!

@mr.c.3760 7 лет назад

Wow, that blew me away...i don't think I could do it but it was just so enjoyable watching you do it!

@ImKsrSze 7 лет назад

Super cool build. I'm going to have to do something like this for my garage. Thanks.

@elvinrivera5638 5 лет назад

DIY Perks could you please add schamtics and wiring

@LuxBacelo 5 лет назад

It's a very good job but I don't find it useful. The fact of hide the monitor Is to use that space for another task or to keep it away form dust if you are working close. A simple solution would be put a wood table with the same size of the base in te top part of the monitor. So when your monitor is hidden the top table will fill the gap. Also, probably will be a good idea put a wood covering the front part of the monitor when is hidden to prevent accidentally hitting it. By the way, I'm impressed with that little DC motor to lift that weight. I would have used a similar motor but with a planetary reductor to prevent the weight pushing down (some planetary gearbox are unidirectional). Again, very good job!

@sandyrush6835 6 лет назад

I've been wanting to make something like this for a long time! Thanks 🙉

@DIYBuilder 6 лет назад

awesome project :)

@SoelbergFamilien 7 лет назад

i am really curious as to how you did the wiring mate. could you please put up a link, to how its done?

@Addy187a1 7 лет назад

www.dropbox.com/s/abtv2gf8755zjl2/Diagrama.png?dl=0

@lorenzolenti4485 4 года назад

@@Addy187a1 Thank's!

@ericbazinga 7 лет назад

Imagine making one of these and putting a TV on it

@tomf6920 6 лет назад

thats what im trying to do for an college project. havent attached the TV to it because it doesnt work as smoothly as his

@pg1171 5 лет назад

Some has already done that one...

@sophias6318 4 года назад

Cool stuff!!! and I really loved the way you promoted - seamless :). I liked the video

@Stelios.Posantzis 5 лет назад

Wow! This surely makes you the king of diy!

@chema8360 7 лет назад

Tim Allen would add more horsepower (yes, I'm old)... Great work, by the way!

@peterbury691 4 года назад

Tim Allen would “re-wire it”, I guess I am older lol. Love this video! And the others. Well presented, clever designs!

@bobbymoore4851 7 лет назад

Schematic and wiring will be added later? Its been three months later still not there!!!

@geokandas 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WbbhBocbl8A.html

@Alexpage1111 6 лет назад

an amazing video, made it seem simple to make with those easy to understand instructions

@diogor420 Год назад

The links are broken

@IamIanOficial Месяц назад

You want ebay links from *7 years ago* to still work?

@bernhardstillger1026 3 года назад

Hi Matt, following your projects is always a pleasure. Now I have found some time to (re-) build the monitor lift desk. But ... parts are not available any more. So, which motor is required regarding the rpm? I assume we do not need to have 10000rpm for the lifter. Could you share some technical details for us regarding the rpm and maybe the recommended power so we can search and find a proper model on ... the web. For sure I will pst an update of "my" project.

@edgarveen2600 2 года назад

Hi Bernard, same issue here. Do you have found the parts?

@bernhardstillger1026 2 года назад

@@edgarveen2600 no. I had to „reinvent „ it with other, available parts. But the idea is the same.

@edgarveen2600 2 года назад

@@bernhardstillger1026 most parts are easy to find. But I have difficulty to find the right motor which has enough strength and speed.

@MikeRuse 2 года назад

@@bernhardstillger1026 What parts did you end up using (I'm late to the party and so the links no longer work and am interested in what type of motor to use (i.e. correct rpm, voltage etc). Any help greatly appreciated

@blackbear92201 3 года назад

Awesome video - thanks for posting! :D

@DomenecSosValles 8 месяцев назад

This is what I was looking for and hope to implement in the coming months. When done I'll video reply for: - Extra rigidity of the moving shelf (just add a couple of L shaped metal bar below, like the vertical ones in the fourth corners). - Improved join of both ends of the drive belt (just sew an opposed teeth bit covering both ends and wrap it with some solid enough metal sheet). - One touch operation in both directions. Yes, could be an Arduino or similar microcontroller, but let's go old school: Two time pulse circuits (one for up, one for down) with a 555 timer with enough time to reach the disconnecting switch. Some TTL (or CMOS if we operate at 12 volts) logic gates and relays will come handy in case Mr. Thick Fingers presses both buttons up & down at the same time so that only one direction of the actuator engine is active. - Panic button to switch everything off, just in case :D - And as someone said, a flipping board. Excellent work, matey :)

@BladeRunner21577 7 лет назад

I got a glass desk :( Pretty damn cool though.

@xxoan.1613 4 года назад

it is also fun to see all the systems and mechanisms behind anything, moving up and down

@Shugoist 7 лет назад

When do we see the Schematic and wiring? My Parts are waiting to get wired up ;)

@Peter-ft8nl 7 лет назад

I asked him on twitter and he said this week :-) p.s see here: twitter.com/DIYPerks/status/861318508831006721

@Shugoist 7 лет назад

cool thx

@DIYPerks 7 лет назад

Yep, will have it up later this week.

@Shugoist 7 лет назад

Matt hope you are doin fine. Would be realy cool to have them. ;) But realy lovin this idea of a motorized lift for the monitors.

@klkmenol 7 лет назад

www.dropbox.com/s/abtv2gf8755zjl2/Diagrama.png?dl=0

@cozmikpcs7708 6 лет назад

This channel is brilliant, its like a tech savvy Art Attack.

@edward20049 5 лет назад

Love the video; I like these projects for my hobby.

@badhonebrahim7707 7 лет назад

dude, mke a motorized table,.... thats much cooler... and super useful..

@IgorMujan 6 лет назад

"Schematic and wiring will be added later." When?

@thehaircut 5 лет назад

It would be really nice to have the schematic!

@geokandas 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-id5usTwHwtY.html

@Ursus_Green 5 лет назад

@@geokandas But how do you add those limit switches to the circuit with that dpdt switch? That's the question :)

@geokandas 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WbbhBocbl8A.html here you are!

@dickzhard7379 5 лет назад

@@geokandas thx, saved me a lot of time...

@edwardkan66 6 лет назад

I love your vids Matt keep up the good work!

@KincadePavich 5 лет назад

So I am working on a footboard for my bed that has this design inside it. I have it all built out, but a few issues... - Motor is ridiculously loud. Why is yours so quiet?! What have I done wrong? - Timing belt is so difficult to get to right tension. Sewing isn't the difficult part, but correct tension is. Tips? - Works with just my plank of wood, but won't spin with weight added. I bought a 775 motor, though maybe not exactly the same on as you. - Struggles once plank is more than halfway down as tension on the board seems to change a bit. Maybe just need to measure more precisely... You made this look so flawless and easy! I am struggling! Haha