Build a Small Dual Rail Linear Bench Power Supply.

Подписаться 8 тыс.

Просмотров 14 тыс.

50% 1

Designing and building a small low noise dual rail linear power supply.
Dual +/- 30V output at up to 950mA (or single 60V output)
All details needed to build your own in the link below, leave a comment if you have any questions.
Download Link: www.dropbox.com/sh/ecy9k822xz...

Наука

Опубликовано:

29 дек 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@GapRecordingsNamibia 2 года назад

It is refreshing to find someone on youtube who has actually completed a linear PSU albeit a small one, Congrats and well done!

@TheStuffMade 2 года назад

Thanks, yeah you can't beat a linear power supply in low noise and general performance especially if you're working with analog circuits. Switch mode supplies are good when you need a lot of power. Cheers, Jake

@GapRecordingsNamibia 2 года назад

@@TheStuffMade WOW! You replied? You are the first one on RU-vid that has replied to a comment I've left on their channel regarding ACTUAL BULT PSU,s, what I mean by that is not taking an already made solution and modifying it to suit your needs but actually building it from scratch. I am currently building one for myself, purely because of price and my location, stuff out here costs 10 times what it does in other countries so DIY it is the only way for us I'm afraid. Not that I'll ever get all the accuracy of a bought supply but hey ho, one has to make certain trade offs given ones skills. Which mine aren't the best but I do try. Regards Charles from Namibia

@karlmartell9279 4 месяца назад

I'm very impressed how well build this device is! Very well done!

@boonedockjourneyman7979 4 года назад

Great stuff. Thank you. You are paying a serious price by using the LM series “regulators” rather than discrete components. It has been interesting watching the art of transistor based PSUs die over the last 40 years.

@TheStuffMade 4 года назад

Thanks, agree, there is both a downside and an upside to using the good old LM317/337, they do ensure simplicity in design and documented reasonable performance but of course they also present some serious limitations. I do however believe the linear PSU still belongs on every bench side by side with the high power (but noisy) switch mode alternatives.

@carlgradolph9676 Год назад

Excellent work from start to finish. I have never built a power supply before, but with the help of this video I think I'm ready to try. Thanks for taking the time to make and share this video. One more subscriber added!

@adrianm2782 4 года назад

Beautiful work. Thanks for sharing

@TheStuffMade 4 года назад

Thanks

@albertvalientecasas3553 4 года назад

Very nice power supply design.

@TheStuffMade 4 года назад

Thanks!

@klave8511 2 года назад

Thanks for this video. I agree with the choice of a ic regulator, known specs known overloading performance. I know it costs more but the work is much less so very much worthwhile, probably cost less when all is considered. I don’t recall the lid but don’t see the venting for heat dissipation for those heat sinks, a small fan and airflow over the heat sink would be very effective. They are huge so maybe not a problem, the 317/337 are designed to shutdown when overheating. I didn’t know about the clear paint over paper, I will use that in future! I like an indicator for overcurrent, the meters are nice, analog is definitely a better choice for a multimeter. I recently made a linear power supply, not too different to yours and I realized that I can’t remember the last time I needed a negative power supply. So many op amps are rail to rail and work off such low voltages that I never need the negative rail. Admittedly I don’t really do audio work, that would likely need the negative rail more often. I also rarely use my switching supply, the noise depends on the load and I don’t want to introduce unknown noise. Even the radiated noise is a problem never mind the noise conducted in the wiring.

@TheStuffMade 2 года назад

Thanks, It's been some time since I built this little power supply and I can say it's served me really well without any problems. Using standard regulators really does simplify everything and avoids any nasty surprises. There is about 10 mm spacing between the heatsinks and the bottom of the casing, so even the vents are not perfectly aligned with the heatsinks they still work fine to draw cold air in at the bottom and vent it out at the top. The only thing I wish I had added is a power indicator led or perhaps some backlights in the meters, just to easily indicate that it's switched on, but it's not critical and something I can always add at any time. I've done another video where I put it through various tests and compare with a couple of other power supplies and it performed very well. Cheers, Jake

@tecnisdaimondm.g9321 Год назад

Excelente 👌

@anurasenarathna1703 3 года назад

Great

@TheStuffMade 4 года назад

Build a small low noise linear dual rail bench power supply, download details in description.

@EngineeringVignettes 4 года назад

Looking good. I have made more than one power supply in my past :) I guess you could put an earth terminal on the back panel... The 2 main filter caps are a bit in the way for 2 of the screws on the TO-220 parts... moving them out of the way for a screwdriver could be a future improvement... Are you going to add a +/- balance trimpot to get both outputs aligned? Have a good new year now, thanks for your contributions in 2019, especially the audio analyzer software... good stuff. Cheers,

@TheStuffMade 4 года назад

Thank you, wish you a happy new year as well. I decided to build this little bench supply because my large dual output bench supply is so large I don't really have space for it on my bench anymore and 99% of the time I don't need much current. Well spotted that it's hard to screw in the heatsink for the first two regulators, impressive, I didn't even think of that when I designed the board, but it was the reason I went with hex screws instead of regular phillips screws.

@EngineeringVignettes 4 года назад

@@TheStuffMade - Using allen (hex) head screw was a good idea. I have a personal distaste for phillips head screws in audio equipment, when one cannot get a good angle on the head to loosen it; that goes back to my technician days... cheers,

@fursino Год назад

I did build the same following your schematics. I had a problem with the negative supply that in particular was not negative keeping the potential difference vout(neg)-gnd= 2.33V. I did remove the lm334 on the negative side and now is regulating down to zero. Current regulations needs to be tested.

@TheStuffMade Год назад

Hello, that sounds strange, it works fine in my build and you can see in the schematic it's correct. Did you use the circuit board layout I provided or just some perf board? Maybe a wrong connection of the LM334 on the negative side? I recommend you add the LM334 again and make sure it's connected like the schematic shows, also make sure the LM334 isn't faulty. Cheers, Jake

@fursino Год назад

@TheStuffMade yes, I did follow you schematic, and the more I look, the more I can't see where the error lies. It must be a wrong connection. I did create the schematic on easyEDA and have the pcb delivered. I will let pass sometime before looking again. Anyway, it is a great experience to learn. Thanks a lot.

@amoontube Год назад

Thanks for a really useful video. Can the pcb's be obtained anywhere? thankyou

@amoontube Год назад

uploaded gerber to pcbway - 5 on the way

@GapRecordingsNamibia 10 месяцев назад

Hi Jake, Hope you are well? I have a question about your voltage config please if I may ask... Why do you have R13 across your 10K pot? how does this change the resistance, is it now a 15K pot? The same on the negative side? Sorry for bugging, but would like to understand why it is being done. Thank you very much... Have a great day!

@TheStuffMade 10 месяцев назад

Hi, actually it changes the potentiometer to around 6.7k (1/R = 1/10k + 1/20k) which is not a standard value and without the 20k across the pot you will not get full use of the potentiometer travel. Cheers, Jake

@GapRecordingsNamibia 10 месяцев назад

@@TheStuffMade Thank you Jake, Understood.