Build An Amazing Motorbike 200cc From Damaged Car Wheels 

ОргСТЕКЛО в колёса - СУПЕР - Лайк:))))💪💪

These are type of people corporations hate!😅

Невероятно надежные колеса...

Я так и понял, что одних колёс не достаточно😂

I really appreciate the creativity in the introduction of the video and the creation of the bike, these wheels having their new opportunity to do what they were made for.Congratulations!

I think it’s hilarious how he makes it look like he’s just eye-balling “center“ for concentricity. Haha

That turned out great overall my man! And while yes the plexiglass looks cool in the wheels, feel like if you hit something hard or go over something like rough-terrain it's just going to shatter on you. Might want to consider redoing those with some steel. But great job either way!

My only suggestion is to make sure your wheels are centered properly and balanced, if they aren’t it can lead to a pretty drastic speed drop. Otherwise great job!!

アクリル板って、ピンポイントで力が掛かるとすぐヒビが入るから、大して走らないうちにボルト周りがヒビだらけになっただろうね。 まぁ、ネタ動画だろう。 実際にはアルミ板に交換して乗ってるんだろうな。

И размер деталей и гиометрию мотоцикла он знает? Движок он тоже в кустах нашел или уже припасеный был?🤔😂

Колесо 🥚яйцом😊👍

Uu wooow amazing 👍👍👍👍

The mind human is awesome! 👏🏻👏🏻👏🏻👏🏻👏🏻

Всё круто и качественно сварено ,меня смущают вставки в диски из оргстекла ,а так супер👍

Be interesting to see how how long does Wheels last maybe you can give us an update

Отличная работа . Но на мой взгляд есть два слабых места у этой конструкции . Первое глушитель будет от вибрации постоянно рвать в разных местах второе крепление оргстекла винтами напрямую к ступице без приставочной шайбы . А так неплохой получился байк . Удачи вам

Молодец 👍

Пластик по центру колёс порвёт, и авария неминуема

Guys one hell of a machinist, I like watching a pro at work

Было уже такое: солдат кашу из топора варил.

Круто👍

muybuen video congratulations

Acrylic is a nice plastic, but polycarbonate or lexan is more durable, and won't shatter when cut or drilled. I think it gives those wheels a nice look.

❤ Молодец 🎉класс😊

Sangat bagus, saya suka sekali. Cara kerjanya..

Эх было бы из чего и деньги я с удовольствием собрал но чуть по другому а так огонь🔥 мотоцикл 🏍🏍💥💥😎👍

Phá quá brother

Amazing how easy you make it look! I really enjoyed your video, well done.

Молодец ,руки от куда надо растут.

bravo pour votre idée ❤

Бесподобно, шедеврально, аплодисменты!!! Полёт фантазии на высшем уровне !!!! Зачёт .

Supper.....Bike . Good Work ❤❤❤

Красиво выполненно и не более.

Super! like this. 😀👍

crazy!! super cool

Superb build

It's nice and it's a beautiful object but it is very dangerous. Plexiglass for the wheel is not a good idea. Ok for 45 kg but not for 94 kg like me. But bravo for the work.

Looks good.

Love you design guys! Keep up the great work.😎👍

Яхшы Матай жиеп алдын Син молодец!!!Вот бу мотай ичмасам

Ручная разметка колеса - супер

I arrived at it by watching RU-vid about making things. very impressive.

Nyimak bang n Kren bang inovatifnya...

أرق تحياتى وأحترامى للجميع

Now that's a cool build. I would be adding lock washers with those nuts and bolts.

Thank you for knowledge SIR you are great very good idea sar you are really great Hare Krishna Hari bol

Buena idea amigo vale la pena poder fabricar en casa y disfrutarlo adelante Arg

Au man, Masken im Freien. Unfassbar

Great job... Pls make it electric next time

U doing will we love u,

This is one interesting video Fawa Bros. I do believe that i will be making me one this coming winter. Thanks for the idea fellas. I will owe you one for sure.

Я бы на этом ездить не стал. 😂 А так идея классная

فنان عبقري

Просто молодец!

Interesting build, I also like how you used the seat as suspension 😄 I know others have mentioned how the wheels are off center and I agree, they need to be centered with better precision to make the ride a little less bumpy and possibly improve steering, possibly with a lathe if you own one. The locking nuts someone mentioned are a good idea, though you could also use split pins. While the above were small things of not, I note two things I wasn't a fan of: The first was your using countersunk screws to secure the wheels to the hubs, I believe bolts with washers to secure them in place are less likely to wear through the plastic or rip them out Lastly, I am slightly concerned about the front suspension since I believe the way it levers forward when you hit a bump or when the vehicle us under additional stress. So, if standard motorbike suspension is not an option, I suggest you look up brampton forks which use a form of pantograph frame to keep the wheel in line, then try fabricating your own version 😉 Niggles aside, I found the build quite entertaining and plan to view more in the future

I am really impressed, it turned out fantastic, brilliant, congratulations, big hugs from the Brazilian brothers. Thanks for sharing

i love your work

Почему я пересмотрю Зелёный слоник? Элементарно от того, что идеи фильма, в быту, намного безопаснее.

Kerennn..goog job .

Нашёл снаряд решил танк построить😊

Что такое стапель, угломер, делитель, балансировка, Гровер.....? Да нафиг надо. Надеюсь, автор понимает , что на этом ездить не только неудобно, но и опасно.

Muito bom, excelente projeto e magnifica construção, fez parecer fácil, mesmo diante de tanta complexidade. Parabéns.

Sangat profesional cara buatnya terima kasih sharing nya 👍🇲🇾

quedo excelente ese proyecto para una buena rodada

Very good

Класс!!!Лайк однозначно!!!

Çok mükemmel bir, çalışma eline, emeğine sağlık.🇹🇷👍

Человек, человечек, ты аккуратно качественно собираешь и идеи интересные, но ведь конструкция - это страшный сон человека, который хоть немного в этом понимает! Ну найди ты человека, который ходь немного в этом разбирается, чтобы он на недостатки конструкции указывал.

Good job

Admittedly the concept and design are quite feasible, but the actual construction might leave a few things to be desired. First are those plastic centre wheels. If that material is acrylic or Plexiglas it will crack and fail under load as both are prone to cracking. It might work is you used polycarbonate but even them there is a design flaw. You need to put bushings between the bolt and the plastic and the bushing length must be identical to the plastic thickness.. If you just bolt it on as shown here the wheels will crack from the holes out. In any event those wheels can also fail because the loading on them will cause the bolt heads to wear against the plastic causing them to loosen off. Once loose, the bolt heads will start to chew up the surface of the plastic and weaken it and create notches which will allow cracks to start forming Second, the accuracy of the hub parts is almost nonexistent. Every flange on those hubs must be concentric to one another and parallel to one another. There are more than a few instances where you can see that this is not the case which will cause pulsing on the brakes and accelerated wear on the chain. Regarding the chain, you have installed the master link clip backwards. Third, the exhaust pipe will last literally miles before it rips the studs out of the engine cylinder head. The assembly is fairly heavy and you need to put secondary supports on it to prevent point loading on the head studs. Fourth, the use of car tires on a motorcycle is called dark siding and it will work if properly done. I have dark sided for a number of years on my touring bike and had no problems. The trick is to select the right tire. You need a run flat tire meant for winter service. If you use just a regular car tire the sidewall flex will be too great and you can walk the tire right off the bead on the rim. Summer or all season radials are not sticky enough to give you a good grip on the road. Winter tires are made with softer rubber compounds that will provide the grip you need. Fifth, you might want to put some more gusseting where the rear suspension attaches to the main frame. You have 90 degree angles there that will act as stress risers and it might be prone to cracking and failure. I have ridden and built bikes for over 50 years so I have accumulated a fair degree of knowledge on what will and will not work. Unlike cars, a very simple mistake can cost you your life.

guys; great build. 2 quick thing that would make it safer for you. I would add a second hub and rim mounting plate to give the swrews and bolts to bite into. I also would use lock washers and blue locktight to keep them where they are supposed to. it would make it a lot safer.

Pretty cool bike and I have to agree, the wheels were slightly off centre but great looking bike

Wow ang ganda

Yeah, very Harley Davidson. 😏

Я не стал бы доверять свою жизнь колесам сделанным из акрила.

I wish i can have this i like it and it will help me saves a lot to my dailies

Excellent work 👍👍👍 . Thank you for sharing. Take care of yourself, be safe🇨🇦

Bravissimi geniali mi auguro che le mascherine siano per le polveri

😎😎👍👍👍👍👍👍👍👍👍👍

what a great creation. not sure i would trust the plastic in the wheels but they sure look great.

genius engineer?

Nice autokill motorcicle man...

шпонка ступицы - огонь

Spr bro

สุดยอดเลยครับ

Overall loved the creativity of this whole project, Only thing not worthy was the plexy-glass centers on the wheels. Overall a really cool build.

El tambor de acrílico se va romper en los baches y sobresaltos. Tratar con más cariño😊 lindo proyecto de lujo

That's so cool ! Awesome job on the build !

GOSTEI MUITO DESTA SUA INVENÇÃO...E CREIO SER BEM ECONÔMICA MOTOCRIADA ..PARABENS AMIGO ..JAÚ SP.BRASIL 😊

🔥 Прикольно!!! 👍

Канечно ведь так легко найти двс и все остальное... а вот колеса самое трудное

REALLY AMAZING

Fantastic !!!

Sensacional como sempre

Why can't you use metal for where you put transparent plastic?

Skill nya luar biasa

Well-done job

I didn't take the fenders out.

엔진을 앞바퀴쪽에있어야 자연공냉이 잘된다,,!저런식으로 엔진이 뒤에있으면 겨울에는 따뜻해서좋으나 여름에는 알이익을수도있다,,,,

First it was the classic walk and stumble on some street rubbish now kick ball and stumble upon some rims haha