Build the Fast & Furious Dodge Charger R/T - Part 103-110 - The Completed Vehicle

Подписаться 75 тыс.

Просмотров 22 тыс.

50% 1

To Build the Dodge Charger yourself head on over to
bit.ly/3lVXJF3
This is the 1:8 scale release from the folks over at Fanhome of the Fast & Furious release of the
Dodge Charger R/T
This collection is complete in 110 issues
00:00 - Introduction
01:09 - Stage 103 - The Reverse Lights and the Rear Valence
04:04 - Stage 104 - Installing the Rear Wheel Arches
05:36 - Stage 105 - Spare Wheel Carrier
06:45 - Stage 106 - Installing the Fuel Tank and Joining the Car
13:47 - Stage 107 - The Front Section of the Bodywork
17:59 - Stage 108 - The Front Left Wheel Arch
20:41 - Stage 109 - The Front Right Wheel Arch
21:37 - Stage 110 - The Sill Reinforcement Struts
24:17 - The Completed Vehicle
Subscribe to World of Wayne at bit.ly/307c9rj
You can now support the channel and see behind the scenes videos on my Patreon at
/ worldofwayne
----------------------------------------------------------------------------------------
My Social Media, Store and Merchandise can be found at :
www.linktr.ee/worldofwayne
Hope you enjoy this build.
#dodge #charger #fanhome #fastandfurious

Хобби

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 124

@WorldofWayneUK Год назад

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne

@markmccormack635 Год назад

I only brought the first one but sadly I had money issues which stopped me from carrying it on , hopefully it will get better so I can get to start and finished a build .

@davidspencer8373 Год назад

Like video

@davidspencer8373 Год назад

Like video

@wisherleelee7138 11 месяцев назад

@@markmccormack635 So you have to buy the part

@bolt7881 25 дней назад

I did it! Thanks for all the tips along the way. After I finished each package, I’d watch your videos of the next one to let me know what was coming next. I’ve got 6 ready to go of the skyline so I’ll see you on that build soon!

@randytaylor1258 Год назад

During the final build, Wayne, it would have been nice to hear the sound effects, too. It's the final time we're going to see this beast, Fantastic job!

@anthonyhoward4718 Год назад

I followed the instructions in the magazine which said to fit the body from the back first. It didn't work. I am away at the moment and picked this video up on my phone and, hopefully, it will fit when I follow you method from the front. Pray for me.

@jamieotoole6828 Год назад

This is a sad one as I'm building the charger alongside you I found your channel through this build so this will be a sad one.

@team_Green562 Год назад

Hi Wayne, I am one of your biggest fans and I was watching the entire dodge charger RT video or episodes and I finally got one for myself and I’m going to start building it

@WorldofWayneUK Год назад

Great build

@rljensen3 Год назад

I found your channel during mid 2020 while in pandemic lockdown. Really enjoy all your builds.

@johntreloar8203 Год назад

Another one bites the dust, wow that seemed to be a quicker build, looks great, nice work Wayne.

@peterarmitage2745 Год назад

Have enjoy the build can't get it in Australia so was good to watch

@dashriptide Год назад

Congratulations on finishing this car. It was my second completed build

@richarddoyle7476 Год назад

Wow what a build I’m a little behind you. Your step by step build has been a massive help thank you

@marksatterfield5989 Год назад

Can't wait to get to that point I'm on stage 46.Thank you for the tutorials it helps alot!

@Cin0s3 Год назад

Congrats on finishing another one Wayne! This one seemed to take forever!!

@Kauye1 Год назад

Hi world of wayne brilliant work on the Dodge charger 👏 it looks really epic you Done a good Job good video

@stevenwheaton874 Год назад

What a gorgeous looking car. I love the black paint job. It's definitely rewarding to see it completed. Great job, Wayne. See you on your next video.

@thedaveymukify Год назад

Such a fun build I've still got 37 issues to go but won't take long the build has flown by

@damianplays3810 Год назад

I finished my dodge charger a few weeks ago it's a great build

@marcelodeniz3932 6 месяцев назад

Amazing building

@spidersprue Год назад

Always emotional when you finish a build. great work as always

@jamiemarshall9765 Год назад

Very awesome looks amazing completed really enjoying your page

@derrellreynolds6226 Год назад

Really enjoyed the build series 👌. Fine job sirrrrrrrrrr. 👍

@milanondrak5564 Год назад

Awesome. Another iconic car in your collection. Keep going at this rate and your garage will put Jay Leno's garage to shame Wayne.

@WorldofWayneUK Год назад

😂

@jenniferbeyer6412 Год назад

Beautiful car. Love these Mopars. Great build.

@jesselewis261 7 месяцев назад

I love your model train

@julianmhall Год назад

Funny, when you said KP I thought 'Crisps!' Wayne *lol* Fabulous build.. the first time I ever watched one of your videos was part one of this model :)

@josephmahoney7292 Год назад

❤ love it and looks awesome. Keep it up with those videos.

@thunderrobots1980s Год назад

a kids batman costume might fit that hardak , awesome looking

@bedfordshiremodeller4491 Год назад

Well done fantastic job nice smooth flush fit for once🤩👏🚗

@ryanburke3782 Год назад

Wow that look amazing

@alantoms3263 Год назад

Very nice!!

@Rognvaldthepartworkbuilder Год назад

I’m done up to pack 10 of the dodge charger

@back-n-actionmodelcollecti2522 Год назад

Nice build Wayne. I'm still waiting on all the parts to my Charger before I start building it. Shouldn't take me as long as I have waiting on the parts....

@crescenciogarcia3837 Год назад

Desde que observe tus vídeos me gusto y empeze armar el mio excelente video

@stephenedwards5254 Год назад

I'm currently building this. I'm currently on issue 74. But I'm really disappointed that the engine didn't have a electric motor inside so when you pressed the button for the sound of the engine the engine went around. But I'm really am enjoying building this car

@raccoondinner4009 Год назад

Nice! I love mine, even though I don't really care for the FF franchise. I'd still be all-in on a DofH Charger.

@swpowell1226 Год назад

NICE !!!!!

@robinaroundtown...2194 Год назад

Hi Wayne...I love how you put the "World of Wayne" on the roof of the car...and even backwards yet so you can see it in a mirror... lololol 😂😂 You can see it around 17:50 till the end of the video...lolol Ok... just kidding ya...it's your sign on the wall reflecting on the roof ... Gee...think how much more it would show up and shine on the car if it had a wash and a polish job...lolol 😂😂 Great build mate... Best regards always across the pond...

@Simon-rt3qu 9 месяцев назад

You're missing the little red bit on the front of the engine block :) Think it's the last bit to put on the car.. it is a tiny little bit.

@williamtrask1582 Год назад

just take easy wayne and you will do alright

@scottrandell4281 Год назад

Looks good Wayne. That body went on way too easily, hopefully when I get to that part will be just as easy for me (I'm about 4-5 packs behind you). Car looks awesome. This and the Cobra both look great. If you can, get yourself the Pocher Lotus F1. Fantastic build, but also the most challenging of all the 1/8 car builds I've done. Mainly due to the fact that there is so much detail and the instructions are horrible (plus they are also wrong in lots of places but there are updated ones online that also have a few flaws in them). Totally separate topic is the Bismarck case. Don't get it if you were planning on it. It's insanely huge, about 8 inches wider than the model and 6 inches longer. Its so ridiculously big, I can't use it. It's just a complete waste and also just flimsy clear plastic. So I packaged it back up and put it down my basement and I'll just leave the Bismarck out in the open. Have a good one.

@WorldofWayneUK Год назад

Yer. I didn’t get the case. I would have no room for it

@WondersChannel Год назад

I hope you completed this both fastly and furiously. 😎

@WorldofWayneUK Год назад

😂

@davidsliwinski2839 Год назад

Let's hear the motor!!!!

@williamtrask1582 Год назад

YEAH

@project.jericho Год назад

Wayne, I'm curious if you've heard of anyone doing a General Lee conversion. I'm buying the kit specifically for this reason. So far I've got 62 issues, still boxed. I might have to one-off it but if there are any resources, it would obviously be easier.

@WorldofWayneUK Год назад

It’s been talked about but I haven’t seen anyone do it

@davidspencer8373 Год назад

Like video

@aaronvandoorn1276 Год назад

I'm glad you got it done looks great. Are you still gonna be Finishing the enterprise when it comes back ?

@WorldofWayneUK Год назад

I haven’t decided yet

@kevinpayne5584 Год назад

Hay Wayne when do you suppose we will get the gauntlet

@WorldofWayneUK Год назад

No idea. I’m thinking May/June

@jeroendesmit7381 Год назад

Hi Wayne, Thanks as always for the awesome build video's. I'm planning on doing a customised Shelby Super Snake / Mustang and I want to put these classic wheels on it. Can you please tell me what wheels would fit better, the front or back? Or maybe a combi just like the Dodge Charger. Would be awesome if you could let me know. If they can be mounted is not important, I'll find a way :) Kind regards, Jeroen de Smit

@WorldofWayneUK Год назад

I think the back wheels are a little wide

@rickgregory9616 Год назад

FANTASTIC! A 2-Year Build completed! I'm disappointed that the hood (bonnet) does not lay flat or hinge up to view the engine. I suppose that's true on the real car, but Fanhome could have used from 'creative license.' Maybe instead of the clips that hold the hood down, you can use 22, or 25g wire that you can easy slip in/out? Shame the engine is going to be hidden from view. All that work gone! You confirmed two things for me that are worrisome: (1) Fitting the body to the chassis. I hope mine will be as easy as yours! (2) Removing the wheels. I have a Pavlov Experiment fear from my Shelby Cobra where I stripped the screw that secured the wheel to the car that resulted in ordering a replacement part. No way to get around this. The wheels have to be removed! That stage is going to give me nightmares - and I'm on Stage 58! 🥴🤪!

@chipwalker3610 Год назад

I found out about the hood / bug catcher a few months back, also found out that the Japanese have thrir own version that has more detail then we received. I've been trying to find out if these parts are available.

@thedman2009 Год назад

So the peanut screw

@williamtrask1582 Год назад

aw i see that you clean the car up

@jim8640 11 месяцев назад

Did you receive the display case ? Thank you for very detail videos

@WorldofWayneUK 11 месяцев назад

@jim8640 11 месяцев назад

Supposed to with the 28th issue. Ohh well i am wairing on 27th and 28th issue's can't wait to finish it

@bradleyjames5130 7 месяцев назад

Hi your link is only for UK I have stared to build because of your videos my fist is going to be robo

@carlturner3184 Год назад

One absolute saddo builder...in model cars

@wisherleelee7138 11 месяцев назад

Do you have to buy the part

@Charris2007 6 месяцев назад

Hi Wayne. Happy New Year. I put the batteries and switch on the car but the front lights inside car and front outside do not light on. The back cable of the lights was cut off and I tried to fix it with a soldering iron heated... the beep and engine sound I hear them ok. what would be the problem..?

@WorldofWayneUK 6 месяцев назад

Sounds like a broken wire

@Charris2007 6 месяцев назад

@@WorldofWayneUK the back wire is broken and I tried to fix it 😔 but the front wire of LEDs is ok I tested it and lights working when I connect it to the back but when I connect in front LEDs were off

@brettcharger1 Год назад

Did you not get the clear case in your last pack ??? As I'm hoping it is and if so how it comes !?? Ie do I have to put that together too ?

@WorldofWayneUK Год назад

Nope

@blackwolf-4236 11 месяцев назад

Hello! I have been collecting this one also, right now on number 37, but still haven't started building it. So I have a question, what kind of oil should I use since you mentioned it in the beginning of the video? Is it necessary?

@WorldofWayneUK 11 месяцев назад

I use 3 in 1 oil. It will just make your life easier screwing into metal

@blackwolf-4236 11 месяцев назад

@@WorldofWayneUK Ok, thanks for the reply. I guess that goes the same for plastic parts, since as I see it's 80% of the model, or...? Anyways, I couldn't find 3 in 1 oil, so I bought some kind of wide use machining oil, I guess it'll have to do.

@user-os9su7sk6t 6 месяцев назад

How can get

@totoelbosse1000 Год назад

12:17 I hope you freed that poor green cable at the left exhaust?😬

@WorldofWayneUK Год назад

I got it

@Christopherhawl Год назад

In the US Army KP means kitchen duty for soldiers in trouble means peeling potatoes and scrubbing pots

@jamiegraham5679 6 месяцев назад

just found your channel i’m on issue 66. they have just realised the skyline from the 2nd film will you be building that?

@WorldofWayneUK 6 месяцев назад

Yep

@jamiegraham5679 6 месяцев назад

i actually can’t wait to start it. i’m getting doms charger put in a glass case and the same for the skyline.

@jamiegraham5679 6 месяцев назад

getting the first part of the skyline soon can’t wait!

@tymbershade Год назад

Wayne, how many models have you put together for your Chanel?

@WorldofWayneUK Год назад

No idea. Over 20-30 I think

@dgphilip1 7 месяцев назад

Hi Wayne, I see that fanhome now have the preorder available for the Fast & Furious Build Brian O'Connor's Nissan Skyline GTR (R34)… It Starts sometime in January 2024, will you be building this one too???

@WorldofWayneUK 7 месяцев назад

Yep

@dgphilip1 7 месяцев назад

I tell you what though Wayne, I think the monthly cost is going to put a lot of people off this time around, (especially with the cost of living crisis going on)… The fact that it’s not only considerably more expensive than any of the previous fanhome building ups, but it only comes with a minimum of six issues per month option (that’s £83.94 per month as opposed to the usual £47.96 per month for the previous fast & furious premium build up)… Which is a little steep me thinks given the current climate, but what do you think?