While building the laundry room (not too long ago), we wanted to install butcher block for our countertop for the pantry side and above the washer/dryer. I've never done anything like this before so I wanted to give it a try.
First I found someone local that milled slabs of maple. Brought it home ripped it into around 2" sticks then glued them together. NOTE: One thing I didn't do right was the amount of clamps I used. I should of tripled it and used about 10+ clamps per butcher block. However, it turned out well regardless, the I sanded it, and just sealed it. Didn't used stain since this wood has a pretty color to it as well. Then I installed it! We're pretty happy about it! Give it a try, great DIY project! Takes about a week with drying time.
WATCH NEXT:
○ Timelapse | Stunning Laundry Room Transformation - • Stunning Laundry Room ...
___
HAVE HOME PROJECTS TO TACKEL?:
Use this Home Depot affiliate link!
(I'll get few cents or bucks from whatever you buy)
- homedepot.sjv....
___
FOLLOW ALONG HERE:
Instagram: / tbuzyan
Pinterest: / homemadenew. .
Website: www.homemadene...
___
Make sure you subscribe to our channel!
Thank you for the support and thanks for watching! - Tim
27 авг 2024