No video :(

Build your own Motorcycle carrier!

Подписаться 75 тыс.

Просмотров 115 тыс.

50% 1

Hey guys, just wanted to show you my latest little project, my motorcycle carrier for the back of my truck. I get tired of trying to get the bikes in and out of the bed on my truck. even though I don't have a big truck, it's still a pain, and I usually have to ask someone to help me, which usually ends up being my wife. She doesn't like to do it because she's worried about the bike falling over, and I don't blame her for that.
So I finally did what I've been planning on doing for a couple years now, building a one man only carrier. I'm so glad I did build it, it only took a few hours to do, and it works perfectly. I've already taken the bike on a two hour drive for my trackday with no issues.
If you have any questions at all on how I built it, let me know in the comments and I'll get back to you as soon as possible.
As always, thanks for watching!
Here is a list of the most commonly used tools on my channel, I'm only listing actual tools that I have been using for years and that I have a proven track record with. I've been a certified dealer tech for over a decade, and I use these tools day in and day out. The camera and microphone you can see and hear their quality in every video. Obviously if you purchase a tool using one of these affiliate links I'll get a small commission on it and every little bit helps me to continue generating more content! Thank you guys so much for watching and interacting!
Amazon Affiliate links:
My absolutely amazing gloves I've been wearing for 7 years now: amzn.to/3oOMMqy
Canon M50 camera bundle: amzn.to/2HclRUD
Saramonic Blink 500 mic bundle: amzn.to/3m00fcC
Milwaukee 1/2" Fuel impact kit with case, battery and charger: amzn.to/2H973FT
Milwaukee 1/4" impact with battery and charger: amzn.to/3dzvGb3
Ingersoll Rand 3/8" impact :amzn.to/2HjJx92
My favorite wrenches! Gear wrench double box end set 8-19mm: amzn.to/2FDKxEN
Gear wrench stubby wrenches 10-19mm: amzn.to/3k9zm5K
Gear wrench reversible ratcheting wrench set Metric 8-25mm: amzn.to/3462zsA
Milwaukee 3/8 ratchet, tool only: amzn.to/348j1J6
Milwaukee 1/4 ratchet, tool only: amzn.to/31dewej
Gearwrench 1/4 swivel sockets 5-15mm: amzn.to/2T3MmOn
Autel professional scan tool: amzn.to/35abxVa
Gear wrench 21-25mm wrenches: amzn.to/2FHvBWe
U.S. general tool cart 5 drawer: amzn.to/3j4emvH
Double flex head ATD offset wrenches 8-19mm: amzn.to/348rewB
Vacuum coolant bleed machine- amzn.to/2TvUO98
My Instagram: @reignited.tx
Email: Reignitedsales@gmail.com
Music by Bensound.com

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 236

@mobileempire5522 2 года назад

That looks better then the ones that I see for sale online

@oldoldpilgrim7898 4 года назад

Asking my wife for help with anything like that is more trouble than it's worth, too. I've got to build one of those. Thanks for a good video.

@Darkmatter321 5 лет назад

Great design. The only thing I'd change would be to load from the right side. That would make it easier to kick the jack down once I unload the bike. Also I wouldn't have to unload into the street, but into the sidewalk, if i have 2.

@ReignitedAuto 5 лет назад

Both solid points. I mainly built it on that side because most motorcycles I've owned have the exhaust on the right side and I didn't want to worry about smacking the exhaust on my tailgate. But realistically I'm sure it would be fine on either side.

@clarktm1275 6 лет назад

Much better than the old bumper carrier I used back when I was a teenager hauling my Yamaha DT250 on my 1979 Lincoln's bumper. These carriers have gotten much safer!

@Richard.Hybels 4 года назад

Nice. I can’t see why the bike stands there by itself just because the front wheel is between the stops. But it obviously does. Good work. I love making stuff with my welder.

@ReignitedAuto 4 года назад

Thanks! I need to make an update video on this, it's still one of my favorite things I've made 👍

@brianpaige4884 3 года назад

Yep well done simple but very efficient.i like it.

@ReignitedAuto 3 года назад

Thanks man, I'm actually building a new one right now, and I'm doing a full video to show how it's made. 👍 This one has served me very well over the last 3 years, but there's a couple improvements I want to make on the new one.

@mbzarate839 3 года назад

Amaizing job! Thanks for sharing. Regards from B A, Argentina.

@ReignitedAuto 3 года назад

Thank you! This is probably my favorite thing I've ever fabricated 👍

@glenns6923 4 года назад

Awesome! Thanks for the video, gets me thinking...I have big GS, may make mine three hitch points so I'm not worrying about the weight.

@ReignitedAuto 4 года назад

Glenn S Sounds good! My favorite part about putting out this video are all the comments that people have given with ideas for improving my basic design, now if only I had a patent for it 😄

@yellowrice1453 8 месяцев назад

This is a great idea. Think I’m going to do something similar but maybe with a wider base that comes off the hitch to support it. Or at least some gussets too. I trust my welds but I like peace of mind too lol

@idahopotato5837 5 лет назад

great job. I think I will make the outriggers collapsible or removable though. If I kept it on the rig I would walk into it sooner or later.

@ReignitedAuto 5 лет назад

I think one of the coolest things about making this video has been all the people offering their opinions on it, and I'm like, I should have thought of that! Removable out riggers is a great idea.

@Fdztinkerbox. Год назад

love the tire lock...ill add that to mine...good ideah...cause half the time after biking u are tired af...haha fyi i found a used 500 pound dirt bike one..for 40$ cad....that's a steel!!!

@GR8WHITEC5 5 лет назад

Can't do that with a 454 lb ZX-10RR. I have to run it at idle. I also upgraded my hitch to a Class 4 and used a solid 2" × 2" hitch arm. Also had two brace arms bolted to the bottom of the hitch to control yaw. Drove 1,987 miles out to Florida and back with zero issues.

@gotdirt66 2 года назад

I really like the front tire lock. About to fabricate out of cargo carrier

@david667766 3 года назад

Good mate I just bought a bunch of steel to build one of these myself, got some design ideas from your video. I will be making it multifunctional so I can use it as a carry rack too for camping equipment etc

@ReignitedAuto 3 года назад

Sounds awesome! One of my favorite things about putting this video out is everyone has their input on how to make it better/more functional. I'm going to build an updated one soon that incorporates some of those ideas. 👍

@heindrivisser8278 2 года назад

This is awesome bro, I've been pondering on how to build myself one of these for a while now and I love how simple yet effective your design is. Top effort.

@carlhouse3793 4 года назад

Good job dude. I just have one suggestion. on the tube that goes into the hitch I would weld some bracing there. like the black widow motorcycle carrier. That way there will be less stress on those welds when you're driving. It would give me just a little bit more peace of mind when I'm driving with the bike on there. Just think about it bro because if that thing fails while you're driving down the highway and someone gets killed there's no one to blame because you made it. I'm always thinking about the what if. You know how people are these days looking for a quick dollar from someone else's pocket.

@ReignitedAuto 4 года назад

For sure, I actually feel the same way. I'm working on version 2 of this design now, hoping to incorporate more bracing there somehow. I will say that the primary tube that connects to the hitch is .25" wall tubing, and after three years and countless uses, there is no deflection or deformation of the tube that I can tell. Still, there's always room for improvement!

@srinivasarchinapalli2354 2 года назад

this is awesome. You need to apply for patent. This is what I was eaxctly looking for in MC carrier

@jdawg219dawson8 2 года назад

Gret job looks like ya did it right

@cuetesalinas 7 лет назад

Its the same as the trackside dirt bike carriers at cycle gear... Cool vid

@peteryates9153 6 месяцев назад

Wicked 👍

@mgbgtv8888 3 года назад

Thanks bro I’m going to build one now.

@ReignitedAuto 3 года назад

Do it, it's my favorite thing I've ever fabricated, comes in handy all the time. 👍

@MrPyro2498 4 года назад

Good job👍🏻👍🏻

@ReignitedAuto 4 года назад

Thanks man, this video is about three years old now, I want to make an updated version with improvements and also more detail. I still love this thing! 👍

@martyhonda6983 3 года назад

Nice job

@ReignitedAuto 3 года назад

Thanks Marty, I've been using this thing for over three years now, works awesome!

@IRISH4486 5 лет назад

Biggest problem I can see is it loads from the drivers side of the vehicle. Which means when you park at the side of the road you will have to set your ramp in traffic and push your bike up the ramp while be in the middle of the street and oncoming traffic. This works in a large empty parking lot but in town , at the beach or in any public venue it will create problems for you.

@ReignitedAuto 5 лет назад

declan duffy For sure I hear what you are saying. I’ve been using this thing for almost two years now, and the situation doesn’t come up very often where you are loading in the street, but it does happen from time to time. My thinking when building it was that the exhaust on almost all sport bikes is on the right side so I wanted that side of the motorcycle facing outward so there wouldn’t be any clearance issues with the tail gate. It’s also been pointed out since by other viewers that I’m more comfortable loading from this side since I’m left handed 😄

@chadliggett7988 4 года назад

13 Motorsports you did an awesome job!

@logmeindangit 5 лет назад

I like the front wheel stopper and locking flip-gadget. I might add that to the rack I built using steel tube and aluminum U-channel. I bought twice the length of channel, so half became the ramp. I store the ramp by wing-nut fastening it (with lock washers!) parallel to and against the inside of the man track. Also, I added lights below the track, with some extra U-channel as housings around the lights. Bikes often block the vehicle's lights, and i didn't eever want to have that discussion with the Serve and Protect people.

@ReignitedAuto 5 лет назад

Good call, it was always my intention to add some lights along the bottom of the rack for exactly the reasons you mentioned.

@bloneyo1 5 лет назад

Great Job , Thanks for Sharing. Be Safe Out There.

@TheCrunkrockjoseph 2 года назад

Thanks for sharing. Looks great. I'd love some more specifics if you have time. Cheers!

@chadliggett7988 4 года назад

13 motorsports Awesome Video, Brother!

@mikeskidmore6754 5 лет назад

Why not make the whole thing pivot to the ground so you don't need a ramp ??

@ReignitedAuto 5 лет назад

I've seen something like that on the back of a motorhome before. It would be really neat, but I think on this project I was trying to keep it pretty simple overall, and easily portable from vehicle to vehicle.

@mikeskidmore6754 5 лет назад

@@ReignitedAuto www.discountramps.com/black-widow-folding-dirt-bike-carrier/p/MCC-500-F/?msclkid=7bbffe1782f71540c57fa2e7013c76d8&Shopping%20-%20Catchall%20by%20Product%20Class%20-%20OTHER&Motorcycle%20Carriers%20-%20POW

@mikeskidmore6754 5 лет назад

@@ReignitedAuto Have to say an aluminum one for $1120.00 is not too bad Aluminum is so expensive.. They use Angle iron between the holding area thus the front wheel drops into the gab between the cross braces so you don't need a device to hold the bike in place while you tie it down.. www.discountramps.com/motorcycle-carrier/p/AMC-400/

@soundslikeaplan841 5 лет назад

Cheers for that mate, that's just what I was looking to make! 👌

@kermit337 4 года назад

thats great sir really simple but great job

@davecox900 6 лет назад

Great job mate well done, going to build one myself like the wheel gripper you have fitted

@Itz_SlooMax 4 года назад

Awesome I like it good job my friend

@lynnyazzie5495 6 лет назад

I think you did a very nice job on your bike carrier and looks awesome!

@ReignitedAuto 6 лет назад

Thank you very much!

@edkennedy6120 5 лет назад

great carrier you have made there, thinking of making one for my old motorhome to carry my suzuki tu 250 ,got good info thanks again.

@myreality7817 6 лет назад

Important to note that you must have a hitch with a rated tongue weight appropriate for the load and your vehicle should also be rated to carry such a load.

@ReignitedAuto 6 лет назад

My Reality absolutely!

@edzupetz7848 6 лет назад

Should start selling them I'd buy one

@kauaisfinest14 5 лет назад

Ed Zupetz there’s brands that already do make and sell these

@jc5112 4 года назад

That was bad ass I love it,

@jamespolucha6911 4 года назад

Nice job I think I’ll try to build one, thanks for the video

@jamespolucha6911 4 года назад

Could I get some dimensions on the tubing ?

@rayfioravanti7620 3 года назад

Very impressive. I bought a black widow for around $450. I like your longer ramp and your idea of cotter pins on the bolts holding the “flipper” wheel chock-superior to my store-bought. I’m a smaller dude however and getting the bike safely up the ramp is a real adventure (someday you’ll be old too, son). I’m considering mounting a winch. Winches are cheap. Only problem is having a place to mount it, power it, and run a pulley out front. That would be the bomb.

@ReignitedAuto 3 года назад

😄 You're not wrong Ray! I actually am making a redesigned version of this right now, that has a drop mount from the hitch so it's not so high up. I like the winch idea as well!

@kirkjohnson9353 6 лет назад

Nice job man! I like the simplicity of it.

@murraymadness4674 2 года назад

well done, although I think I would make it lower to the ground and put a drop from the hitch.

@ReignitedAuto 2 года назад

Great minds think alike, the new version has exactly that. 👍

@85chevysw 5 лет назад

Nice! I like it, but i do have a question... Why not just buy or make a folding triple ramp and ride the bike up? Both feet safely on the ramp as you power walk the bike up. There for, not needing help from anyone and not sacrificing your bike in the event of a rear end collision.

@ReignitedAuto 5 лет назад

Not a bad plan, every idea can be improved on :)

@85chevysw 5 лет назад

@@ReignitedAuto true, i was just curious if maybe you needed the extra room for track gear or what not? I do like like it alot though, its perfect for someone who has a suv.

@neomatrixfree8031 5 лет назад

I'd recommend you sell the plans. I don't weld, but my son is learning this year. I like the no trailer, license, title, registration control-crapola that this avoids. I would buy a set of plans, and as of when I watched this, over 47,000 people had watched it too! 4,700 (10%) x $10 = $47,000! There's everything right about getting paid for a proven great idea!

@googdigitalmedia 5 лет назад

awesome. you inspired me

@ricardomargara 6 месяцев назад

Nice idea! have you think about to put 2 side brackets? Regards

@wjb111 5 лет назад

Very nice

@peetstruwig488 2 года назад

Thanks

@FrankHurtAuto Год назад

Loved the video, going to try making one. What is the name or number of the part that tilts and holds the back of front wheel. Thanks

@ReignitedAuto Год назад

Check either of these part numbers on the harbor freight website and it'll get you there 👍 SKU(s)61670, 97841

@kellyjohnson7208 7 лет назад

I got to see you use it last week in person. It is beefy, and was really stable with the bike on it. I was impressed! So when are the track videos coming?!!?😁😆

@ReignitedAuto 7 лет назад

Soon, trying to edit them now. But I hate to tell ya, most of the forward facing ones didn't turn out :( the camera was pointed too far down so I only got a lot of video of my gauge cluster.... only the first session was ok really. but the rear facing ones turned out great! haha.

@Edge_Az 4 года назад

good job mate

@jeepinjohnny2898 6 лет назад

hey - good bit of engineering.

@wilmer2754 6 лет назад

Great Job Mate; Would you have a basic plans/video so I can follow. Many Thanks

@tp7393 5 лет назад

Good job... Thanks for the video! 🙃

@michaelsweet8327 4 года назад

Love it! Awesome build! If you can, could you share the dimensions for the build. I wondered what you used to connect the long 2x2's etc. Thanks! I'm building one like yours and need to add a space for a Honda 2k gen.

@jimbrowning9906 6 лет назад

I liked your rack, particularly the front wheel holder feature! Any drawings, patterns or info on the Harbor Freight piece? jb

@cameronwood7760 4 года назад

Thankyou for putting your carrier to video. Could you please send me some more details of your plan. Regards Cameron (Darwin Australia)

@killajr51 Год назад

I’m just wondering bout the tongue weight max.. because it mostly refers to max weight when towing for sway risks.. I just don’t know if the hitch Would rip off or what

@oscardominguez5786 10 месяцев назад

Exelent

@thepeach12345 3 года назад

Ill trust it as bout as far as I can stand watching this video...

@ReignitedAuto 3 года назад

Ouch, well I've been using it for over three years now with no issues 🤔

@thepeach12345 3 года назад

@@ReignitedAuto Wow really? Thats good, my opinion has changed as result of this great video and conversation. Keep posting the great videos!

@nevillebrown2811 2 года назад

It looks great works well is it possible to get the dimensions of it as it’s a bit heavier duty than the ones you buy thanks

@jvidrio31 6 лет назад

Great idea thanks.

@bullzye101 6 лет назад

AWESOME STUFF ,, THUMBS UP

@gcgordon6993 3 года назад

Awesome build wondering how I could build something similar to load my Harley to my Hummer H2 SUT Pickup

@ReignitedAuto 3 года назад

I'm going to post an update soon for building one yourself, however, for putting a Harley on it I think you'd have to brace it up a little stronger, I only designed this thing to take about 500lbs total. Unless you've got a sportster your bike is likely heavier than that. I need to work on a more robust design for bigger bikes 👍

@simontopspreadplastering5209 5 лет назад

Excellent!!

@harleybob7315 2 года назад

I would have it turned around to get to the side stand easier

@alansmith5616 2 года назад

I've priced motorized lifts for an 800lb Harley in the $3K area. What about the highlighted ramp type with a steel cable winch (as on a boat trailer), either manual or motorized, to pull the bike forward rather pushing it?

@VehicleHunter 5 лет назад

Well done, will a bike like yours be able to be carried in a carrier on a tacoma or frontier pickup?

@ReignitedAuto 5 лет назад

Shouldn't be an issue at all. I think there would be a negligible difference between my half ton and a frontier, only real difference might be width, but I wouldn't have any concerns.

@VehicleHunter 5 лет назад

@@ReignitedAuto Thanks! Subscribed, keep up the good work.

@great2c4me 5 лет назад

I've got a R51 pathfinder. Definitely needed airbag supports installed.

@DigitalminiDV 7 лет назад

I was thinking of buying such as a thing myself if there one exists.

@ReignitedAuto 7 лет назад

I'm not sure if anyone makes one exactly like mine with the flip style for the front wheel. But with their increased popularity lately I wouldn't be surprised if there is one just like it before long. Thanks for watching!

@seanhortillas1 5 лет назад

Awesome build!but You’re a big man look easy for you pushing on and pulling out the bike,but someone small guy or skinny guy I don’t think they’re be able to pull out the bike.

@davidmacmurchie1443 4 года назад

This is a great idea and I have searched here in the UK for something to use similar for my Landrover discovery 3. The problem for the Landy is the nose weight is not enough to cary my old Africa Twin. Any help you can give me will be most welcome.

@puppy2334 6 лет назад

Hey man any way I can get the plans off you to build that

@matbailey53 4 года назад

Awesome man! I’d like what you used etc! Thx.

@ReignitedAuto 4 года назад

Working on an updated version now, I'll get you a link to the video when it's up 👍

@danoldsbb4558 5 лет назад

hi nice rig, can you tell us de distance from the pivot pin of the wheel lockthingy to the vertical stop? thanks

@great2c4me 5 лет назад

I've got the front wheel chock from cyclegear. The pivot point measures 18 1/8" from the resting point of the front end of the tire. For my 120/70 17 front tire... Locks it in perfectly.

@TMcGee_3 5 лет назад

Its awesome

@salsan8896 6 лет назад

thanks for your videos , please can you put sizes , long ,wide, how far from the truck bumper, etc ,thanks.

@ALASAN76 2 года назад

Good day sir, how do you connect the bike rack to the body of the car, hoping for your next vlog so that people know where is connected

@archiekupski905 2 года назад

Right into the receiver

@gambhirahcaitanya4393 2 года назад

thanks for the video, do you know the bike's weights?

@ReignitedAuto 2 года назад

right around 500lbs

@markdiekman2437 7 лет назад

I like it I like to biuld one could you put together a cut sheet for the steel thanks

@agrwave 6 лет назад

Awesome!!

@jasonefteland4856 6 лет назад

Do you have any measurements? I’m looking to build one for my sons Moto cross bike for Xmas and I really like the way you built yours.

@stevebillow395 6 лет назад

Nice

@davelangton5097 Год назад

What is the weight of your bike..and you do long run i am a snow bird from Quebec i have scooter 480 pounds anny advise many Merci i use a express 1500 wit 5000 hitch tow ..

@onemeangreen 4 года назад

ever try this with a road king?:)

@ReignitedAuto 4 года назад

I'm going to go with a solid NO on that one :)

@wrenchesandcars5161 3 года назад

Im looking to build one for a atv that weights 700lbs so I was just wondering for comparison

@vegasborn8111 6 лет назад

Silly question, is there any purpose on why you built it so you load your bike from the driver side instead of the passenger side? Good job looks sturdy and I like the idea of the swivel to hold your bike.

@ReignitedAuto 6 лет назад

Actually there is a reason, most sportbikes have the exhaust exit on the right side of the bike, so i made it this way because you don't have to worry about clearance to the tailgate when you load the bike. Thanks for watching!

@paultiller6175 6 лет назад

Another positive is that you have the front brake within easy reach to keep control of bike. Great vid!!

@myreality7817 6 лет назад

Loading curbside while parked at the side of the street enables you to have less of an incline on the ramp.

@JavierBlanchardBJJ 2 года назад

How much would you charge to make one that would carry 1000 pounds motorcycle

@drewappleget1325 4 года назад

Looks very well made, do you have the dimensions of how you made it? Looking to build one for a trip from Iowa to Kentucky and back. Thanks!

@adamh4756 3 года назад

do you have a prroblem with the out rigger hitting your bumper or straps rubbing your bumper?

@ReignitedAuto 3 года назад

Nope, it's worked perfectly in the 3 years since I've built it. I'm actually making a new one right now that has a 6" drop built into the hitch to make for easier loading. 👍

@billwiley7216 2 года назад

@@ReignitedAuto Be careful with the drop as pulling in and of driveways or parking lot entrances with the carrier so far behind the rear axle you may end up dragging. May want to put some small wheels like you see on some low slung motorhomes on the rear of the rack to safeguard against it. Actually unless the bike is broken down why not start it and put it in first gear and walk beside it and let it pull its own self up the ramp and onto the carrier? I have always put my bike in gear after loading even if manually loading to help maintain the bike in position on the carrier as a safety precaution. Actually another reason to load from the passenger side of the vehicle as then the gearshift and the kickstand will be on the side of the bike you are guiding it onto the carrier from. I have one of the regular harbor freight hitch carriers and have loaded a KLR650 up using that method although that in my opinion is pushing it weight wise for a receiver hitch carrier regardless of what it is made from. All that weight is still technically bouncing up and down on one 2" piece of square tubing being held in by a single hitch pin! My opinion if you are going to be carrying a bike that weighs more than about 350 lbs regularly I would get two of the step bumper receivers and weld up some brackets to mount them to the vehicles frame rails to make the carrier have 3 mounting points to better distribute and carry the weight more evenly across the entire carrier and also to eliminate the stress and any sway from side to side movement which only using the single center hitch attaching point is subjected too.

@mohammedshafras9611 3 года назад

Hi i like build one like this so please can you help with this can you please tell me how did you do this ? do you thank this is safe

@waynedunne4507 7 месяцев назад

Hi chief, do you have any dimensions for the build?

@notabiker1 6 лет назад

How's the weld holding the platform to the 2" tubing holding up and did you end up reinforcing it at all? Also did you do anything to tighten up the tubing to receiver connection slop?

@jayvalenz1930 4 года назад

If buy that in a heartbeat! Have you thought of making a few & selling them? I’m in the market for my ZX6R stunt bike. Before I buy one, I would like to know if your willing to make one & sell it. I would be willing to pick it up..I’m in the Midwest. Give me your thoughts. Serious buyer..

@funmax05 4 года назад

Can you please share the link of the flipper to lock the tire.

@vicmcb4375 6 лет назад

Don't you think this would brake the hitch of you travel for 24 hours straight?

@bill45colt 7 лет назад

neat,,,thanks

@ReignitedAuto 7 лет назад

Thank you for watching!

@viktorrotkiv1698 4 года назад

Very interesting, I’m starting to think to make my self one , too. How heavy it is .?.

@ReignitedAuto 4 года назад

One of the biggest drawbacks, it's probably over 80lbs 😯

@maxjoey197 2 года назад

I was guessing how much your bike wight

@ReignitedAuto 2 года назад

I think full of fuel it's just under 500lbs.

@BIKEMAN21 3 года назад

would it not be safer using a trailer ?

@ReignitedAuto 3 года назад

Generally yes it's easier to load using a trailer. This is just an alternate option for someone who doesn't want to buy a trailer or doesn't have room to store one.

@BIKEMAN21 3 года назад

@@ReignitedAuto With that kind of heavy bike i would run a load chain or a 5000 lb rated strap to the hitch mounts in case something fails.

@ReignitedAuto 3 года назад

@@BIKEMAN21 Extra precautions are never a bad idea. I've been using this carrier for three years now, and it's been my favorite thing I've ever made. Super useful!