Тёмный

Building a 1970 Dodge Charger from scratch 

Cam Racing
Подписаться 12 тыс.
Просмотров 64 тыс.
50% 1

It’s pretty exciting to finally see this look like a car again. Fitting these panels and getting the gaps lined up was a lot more work than I expected. It takes time, lots of it, and there is no way around that unfortunately. Now that everything is fitted up, it’s time to start modifying these and shape the appearance of this build.
New ‪@autometaldirect‬ Catalogs! :
www.autometaldirect.com/catal...
For daily updates follow my Instagram:
/ cam_racing
Follow the boys and their channels below:
‪@crewcabdart‬
‪@ThatGuyWithTheFords‬
‪@pylescustomzgarage‬
‪@SallysSpeedShop‬
​⁠‪@Theoldcarchannel.‬
‪@builtshouldaboughtgarage7543‬
‪@RidicULooseAutomotive‬
‪@DuheSpeedShop‬
‪@BryceCold‬

Опубликовано:

 

19 дек 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 183   
@bigospig
@bigospig 7 месяцев назад
Your work is incredible and the fact that you are doing it in a storage facility is mind blowing. I look forward to seeing what you do after college.
@camracing
@camracing 7 месяцев назад
Thank you. Just trying to make the best out of what I have.
@SteveVi0lence
@SteveVi0lence 6 месяцев назад
It's so he don't need to pay the electric bill after all that welding lol
@dennistwitchell8821
@dennistwitchell8821 7 месяцев назад
I used AAR fiberglass fenders on the front of mine 20 yrs ago. They were surprisingly good and required very little work.
@tedconroy5074
@tedconroy5074 7 месяцев назад
Cale, I've been watching you from the beginning. And you still blow my mind with what you can achieved. Keep being you!
@camracing
@camracing 7 месяцев назад
Thank you, I always appreciate your comments!
@albertchampigny9391
@albertchampigny9391 7 месяцев назад
Man I don't know why you do not have more subscribers, great stuff
@mingo2385
@mingo2385 7 месяцев назад
We have to get his likes count up
@Longduckdong2
@Longduckdong2 7 месяцев назад
I absolutely agree 👍
@novaaldo1735
@novaaldo1735 7 месяцев назад
Chris Birdsong had some videos of fitting charger quarters a couple of years ago and he had to use a big ass hammer and a 4X4 block of wood to get quarter to get in shape with the door.
@camracing
@camracing 7 месяцев назад
I did the same thing👍
@matt68rtj52
@matt68rtj52 6 месяцев назад
He also shows how to adjust the rear of quarter to line up better with the end caps!
@davidbisnette7673
@davidbisnette7673 6 месяцев назад
That tail section is amazing, can’t wait to see the finished product, masterful metal work young man, your are amazing
@camracing
@camracing 6 месяцев назад
Thank you, I appreciate you watching
@octane_matty
@octane_matty 6 месяцев назад
keep up the good work, YT needs more of this style DIY builds
@camracing
@camracing 6 месяцев назад
Thank you, I appreciate you watching
@rotangman5786
@rotangman5786 2 месяца назад
How the hell do you have the balls to do this while so young? Like how did you learn all this stuff already? Truly impressive dude!
@jackieboyd7545
@jackieboyd7545 7 месяцев назад
Your knowledge is so far ahead of your age I’m 71 yrs and enjoy watching and listening to you and hearing your ideas. Keep up the good work
@curtisdanielsforservice4131
@curtisdanielsforservice4131 7 месяцев назад
Almost lost confidence in you completing this project with the extent of the teardown this is a amazing car😊
@ericmeyer3264
@ericmeyer3264 7 месяцев назад
I enjoy you and the project. I am retired shop owner who had many restoration customers and not enough skilled craftsman - you would have been hired 😅
@camracing
@camracing 7 месяцев назад
Haha, hopefully one day I can make my way into a shop
@boujie-tr6pf
@boujie-tr6pf 7 месяцев назад
I'm about to the point of building my own charger since everyone thinks they're worth 150k
@FransvandenBergeMuziekschuur
@FransvandenBergeMuziekschuur 7 месяцев назад
Keep at it. There are alot of people who would jump on the opportunity to use your skills on a charger once your skill level matures.
@maxburner3500
@maxburner3500 6 месяцев назад
THIS is what I have been looking for: Somebody making a Charger out of AMD parts, giving others ideas on building their own with the bare minimum. Good job!
@camracing
@camracing 6 месяцев назад
Thank you
@GWBergen61
@GWBergen61 7 месяцев назад
I'm enjoying the progress slow and steady is the mark of a Craftsman.👍
@camracing
@camracing 7 месяцев назад
Yes sir, it takes time to do it right and learn along the way
@cuttersgoose
@cuttersgoose 6 месяцев назад
Well done, keep it up, your inspiring me to pull out my 68 hemi charger from storage and finally put the quarters on it that it’s needed for 20 years.
@camracing
@camracing 6 месяцев назад
Go for it! That’s awesome to hear, sounds like a special car
@cuttersgoose
@cuttersgoose 6 месяцев назад
@@camracing yes thanks, its 1 of 211 4 speed disc brake super trac pac dana hemi car, had it since high school 87., motor and trans are fresh, body needs typical charger lowers and trunk....theres a vid of the motor on the dyno on my utube channel...im definitively making room in the shop now..!! im not young like you, i need to get moving,..!! good luck with your 70...
@sadiejustin
@sadiejustin 7 месяцев назад
Badass dude! Big dreams come true with big work. You are not short on that work ethic, for sure!
@camracing
@camracing 7 месяцев назад
One step at a time, I know it’ll be a worth it
@38shaun
@38shaun 7 месяцев назад
Good stuff! Your video production and explanation is fantastic and very watchable. My job is in television production, my life long hobby is Mopar. Thanks for a great watch.
@camracing
@camracing 7 месяцев назад
Thank you, I appreciate you noticing that. I try to keep it simple and explain as much as possible.
@simon_hawk5758
@simon_hawk5758 6 месяцев назад
I don't have any decent garage space, looking at a storage unit to start work on my old truck. Nice work man!
@camracing
@camracing 6 месяцев назад
Thank you. It’s not ideal, but if the property owner allows you to work on your car in there, sky’s the limit.
@gerrymilidantri6457
@gerrymilidantri6457 7 месяцев назад
Cam your patience and methodical craftsmanship is second to none. I'm so impressed with your ability to keep motivated considering the complexity of your project. Great job and have a Happy Holiday !
@camracing
@camracing 7 месяцев назад
Thank you!
@ThatGuyWithTheFords
@ThatGuyWithTheFords 7 месяцев назад
I wanna be like you when I grow up 😩 Seriously dude keep up the great work 👏🏻
@camracing
@camracing 7 месяцев назад
Nooo, I wanna be like you🫶 Appreciate you brother
@nathanielpotanko7880
@nathanielpotanko7880 7 месяцев назад
I saw your duster on power tour this year my dad and I took his 68 charger hopefully my 69 corenet will be there next year. Awesome build btw heavy fab work is my favorite keep up the good work
@camracing
@camracing 7 месяцев назад
Thank you, I appreciate you following along
@pylescustomzgarage
@pylescustomzgarage 7 месяцев назад
Great work Cale. Watched this video on my way home from work LOL! Keep up the great content man!
@camracing
@camracing 7 месяцев назад
Appreciate you brother🫶
@kbsingleton
@kbsingleton 7 месяцев назад
Project is coming along great! We need some new CAM Racing shirts. 🙂
@camracing
@camracing 7 месяцев назад
I really should make some, it’s super expensive up front and a risk if they’ll sell or not😅
@sunbirdgarage2774
@sunbirdgarage2774 7 месяцев назад
Maybe a presale? Only make what people pay for in advance? 🤔
@pbush5440
@pbush5440 7 месяцев назад
Never underestimate what talent and desire can accomplish!
@camracing
@camracing 7 месяцев назад
Determination and the willingness to learn is key
@Viktorrhansen
@Viktorrhansen 7 месяцев назад
great handwork man!
@camracing
@camracing 7 месяцев назад
Appreciate it!
@monktraps
@monktraps 7 месяцев назад
Please have more frequent uploads, be it a few welds and what not. Would love to watch more of this project! ❤ Keep up the great work!
@camracing
@camracing 7 месяцев назад
I’d love to be able to do more uploads, it’s a lot of work between going to school, working full time and then trying to do quality work on the car and now rush anything for a RU-vid video. I have some ideas for more videos this next year, we’ll see how it plays out👍
@jeffreyevens2033
@jeffreyevens2033 7 месяцев назад
Projects looking super. You continue with the WOW factor every video with your skills and eye for detail. She's not going to a 50 footer. Merry Christmas!
@280zone
@280zone 7 месяцев назад
Keep up the great bodywork, strike that, body creating. stepping it up on the video editing too. Do I sense possible body widening?
@camracing
@camracing 7 месяцев назад
Potentially
@wht240sxka
@wht240sxka 7 месяцев назад
That’s a awesome Christmas present to yourself. Great work and approach. I have a complete car and sometimes don’t know where to start. I I know is if you don’t ever start, you won’t ever finish…
@camracing
@camracing 7 месяцев назад
That is correct, some times you have to just dive In and go for it.
@RCSN95
@RCSN95 7 месяцев назад
👑 Every Video I get more impressed Cam Hype to see the chargers future 🤙
@camracing
@camracing 7 месяцев назад
Much appreciated, thanks for following along
@jacoberler5622
@jacoberler5622 7 месяцев назад
Bro full respect for how your making that car right and when it’s done it’s gonna be worth so much
@camracing
@camracing 7 месяцев назад
I sure hope so, thank you man.
@jacoberler5622
@jacoberler5622 7 месяцев назад
@@camracing bro there super rare and in excellent condition they keep going up in value and I hope to own one some day
@tlr-nut7275
@tlr-nut7275 6 месяцев назад
​@@jacoberler5622Not that rare. They made 50,000 of them.
@DudesWithWrenches
@DudesWithWrenches 7 месяцев назад
more amazing work
@camracing
@camracing 7 месяцев назад
Thank you!
@roycervantes1341
@roycervantes1341 7 месяцев назад
Great video Cam Racing, the charger is gonna be awesome, Yee
@mopar4don
@mopar4don 6 месяцев назад
Great job, I'm looking forward to more videos! Keep in mind that you can bend those quarter extensions to make them fit better.
@RenegadeADV
@RenegadeADV 6 месяцев назад
Man, cool project, I Am here for it.
@camracing
@camracing 6 месяцев назад
Thank you, I appreciate you following along
@chadwright7614
@chadwright7614 7 месяцев назад
It's coming rite along
@camracing
@camracing 7 месяцев назад
One piece at a time
@josephrohn4780
@josephrohn4780 7 месяцев назад
Hey buddy! It’s awesome to see a young man with the skills that you have! Keep up the good work!
@camracing
@camracing 7 месяцев назад
Thank you, I appreciate you watching!
@jimmyterrell2467
@jimmyterrell2467 7 месяцев назад
Nice progress on your car. Your attention to detail is unmatched! Great video as always. Keep hitting it and you will soon be moving on from sheet metal work onto putting it back into driving condition. Merry Christmas to you and your family!
@ssindustries
@ssindustries 3 месяца назад
Also building a 70s car from scratch, see our cars at sema soon😎 rad to see us younger guys building old cars
@tombrenes2411
@tombrenes2411 7 месяцев назад
Wow what a great build I’d find a used nascar chassis or roller or a rolled hellcat Set it up as a race car track car and drift car
@kennethsonier1766
@kennethsonier1766 7 месяцев назад
I can't think of enough good things to say about your work, absolutely amazing! I wish you and your family a Merry Christmas 🎄✌️🇺🇲
@camracing
@camracing 7 месяцев назад
Thank you, just trying my best. Merry Christmas to you as well.
@rustbucketrestos6511
@rustbucketrestos6511 7 месяцев назад
Keep up the great work! She’s starting to take shape! 🤘😎🤘
@camracing
@camracing 7 месяцев назад
Yes sir, thank you!
@theguy9234
@theguy9234 6 месяцев назад
First time seeing this channel. Gotta say. You are doing a great job! Real talent. Should get your channel to graveyard garage and nicks garage
@camracing
@camracing 6 месяцев назад
Thank you, I appreciate you watching
@gpoetx
@gpoetx 7 месяцев назад
Watched you use that seymour black rust converter and bought some. Really really good. Think I'll try the weld though prime next
@camracing
@camracing 7 месяцев назад
It’s definitely some good stuff, I’d recommend it for sure👌
@zachschaefer1369
@zachschaefer1369 7 месяцев назад
Great work with the car as always! Your video editing is also getting very good, keep up the great work!
@camracing
@camracing 7 месяцев назад
Thank you, I’ve been trying to improve on that as well
@Dustinicus.
@Dustinicus. 6 месяцев назад
I have always wondered if one could boils a classic cat from body panels. I imagined a tube chassis for the most part with panels fit to it. Good work i look forward to updates
@camracing
@camracing 6 месяцев назад
Thank you. The plan is to do a tube chassis👌
@Dustinicus.
@Dustinicus. 6 месяцев назад
@@camracing looks good so far. Too bad the fenders are as rough as they are. Maybe you could neutralize the rust and use fiberglass to build up the inside for structure and to fill some of the fender
@SeaninMa
@SeaninMa 7 месяцев назад
Who the hell thinks a second gen Charger is boxy?? '68-'70 Chargers are a work of art. Probably one of the most beautiful American Musclecars.
@JAY-JAYcra
@JAY-JAYcra 7 месяцев назад
Looking good 💯
@camracing
@camracing 7 месяцев назад
Thank you
@lennym1636
@lennym1636 6 месяцев назад
Aftermarket parts are never plug and play they fit close to what you need but you HAVE to work them always, good luck I hope you get it all done the way you want it to be...
@davepriddy9263
@davepriddy9263 6 месяцев назад
Keep doing what you're doing. Looking pretty good so far.
@camracing
@camracing 6 месяцев назад
Thank you
@rafaelbertolotti
@rafaelbertolotti 6 месяцев назад
My hero!
@Amxracer
@Amxracer 7 месяцев назад
Cool 😎 ! Great work , love the progress !
@crashandcynder
@crashandcynder 6 месяцев назад
This will be good for a crown vic body swap too
@dieseltechjb
@dieseltechjb 7 месяцев назад
This is absolutely ridiculous and I love it! Deff will be following along. Great job.
@camracing
@camracing 7 месяцев назад
Haha I appreciate it, thanks!
@Project2gen
@Project2gen 7 месяцев назад
Subscribed! Very interested in how your doing this and can’t wait to see how it comes out! Good work!
@camracing
@camracing 7 месяцев назад
Thank you, just trying my best and using what I have👍
@exstacc1886
@exstacc1886 6 месяцев назад
as long as you put in a roll cage or some other safety feature, the side panels being rotted wouldn't be that bad of an issue.
@nickforbus378
@nickforbus378 7 месяцев назад
Great job!! Your going to have an awesome car!
@camracing
@camracing 7 месяцев назад
Thank you
@GreybeardGarage1972
@GreybeardGarage1972 6 месяцев назад
Just happened across the channel, damn bro, nice work!!
@camracing
@camracing 6 месяцев назад
Thank you!
@Tea-oc3gh
@Tea-oc3gh 7 месяцев назад
Built better than the factory ever did 🤣
@camracing
@camracing 7 месяцев назад
That is the hope
@aleksandarnikolic2743
@aleksandarnikolic2743 6 месяцев назад
Chargerman!👍
@KSIXRIDER
@KSIXRIDER 7 месяцев назад
Nice work
@camracing
@camracing 7 месяцев назад
Thank you
@JTGTX70
@JTGTX70 7 месяцев назад
Great work as usual man. AMD is the best out there but it's not perfect. You're going to have to cut stretch, shrink and manipulate it to get good fitment. Like the quarter extensions. My 69 pieces fit the original quarter ends perfectly but not the New AMD quarters I have.
@camracing
@camracing 7 месяцев назад
They definitely take some tweaking all across the board
@scottkovacs7634
@scottkovacs7634 7 месяцев назад
Your videos need to be a little longer it's looking great nice work
@gazza6348
@gazza6348 6 месяцев назад
G'day young fella been watching all along your a credit to yourself an excellent craftsman at your work good to see you doing well keep it up mate all the best buddy 👍👍🇦🇺🇦🇺
@camracing
@camracing 6 месяцев назад
Thank you, I appreciate your support!
@shawnkelley9169
@shawnkelley9169 7 месяцев назад
Looks great together I see your car show IDs 🧐nice collection going 💪
@camracing
@camracing 7 месяцев назад
Thank you
@heavensmopars
@heavensmopars 7 месяцев назад
I just subscribed. I’ve never done this big of a project before, but I’m about to pull the trigger on the complete back half and replacing the rooftop on my Charger. Thanks for the hints and pointers. 🤔👍
@camracing
@camracing 7 месяцев назад
The roof top is definitely a big project, I’ll be getting to that shortly possibly. Good luck!
@heavensmopars
@heavensmopars 7 месяцев назад
@@camracing if I can get to mine before you can do yours, I’ll try to pass on some acquired knowledge… 🤔👍😉
@DaPenceman
@DaPenceman 7 месяцев назад
Great respect for what your doing, I would be in a full panic attack mode if I was you. It appears you will have to base all your frame and chassis measurements off the external skin. If you stuck with stock replacement parts you would have a solid rolling chassis by now
@camracing
@camracing 7 месяцев назад
Correct, I have main frame built already. I built them about this time last year.
@TRAHAROCKER
@TRAHAROCKER 6 месяцев назад
Respect!!
@ckane510
@ckane510 7 месяцев назад
Nice work young man!!!
@camracing
@camracing 7 месяцев назад
Thank you!
@roycervantes1341
@roycervantes1341 7 месяцев назад
My favorite car too ,Yee
@autometaldirect
@autometaldirect 7 месяцев назад
so good! Nice work buddy!
@camracing
@camracing 7 месяцев назад
Thank you, I always appreciate you guys’ support!
@roycervantes1341
@roycervantes1341 7 месяцев назад
What’s up Cam Racing 👋
@camracing
@camracing 7 месяцев назад
Howdy🤙
@mohawk2416
@mohawk2416 27 дней назад
Thanks man , trying to figure out my 70 charger rt. Needs everything you are doing . WERE DO I START. THANKS MARK FROM CHESTERFIELD VA
@gabrielantoniomartin7995
@gabrielantoniomartin7995 7 месяцев назад
Amigo siempre miro tus videos También soy fans del Charger Saludos desde Argentina
@camracing
@camracing 7 месяцев назад
I appreciate your support
@torekristoffersen176
@torekristoffersen176 7 месяцев назад
I love AMD metal as well… the bad part is they never have anything in stock and it takes forever to get it back in inventory (I thought covid was over)?? It’s frustrating trying to complete my ‘68 Charger when there are no quarter panel patches ever available….😢
@camracing
@camracing 7 месяцев назад
Check summit and jegs if you haven’t already. They carry a lot of AMD products and generally have a good bit in stock
@torekristoffersen176
@torekristoffersen176 7 месяцев назад
@@camracing thank you, I’ll do that. Keep up the phenomenal work on that gorgeous’70 Charger Cam!
@lifewithkp7805
@lifewithkp7805 7 месяцев назад
I’m not sure if this has been done or if you’re set on the net goal of it but it would be BA see this mated to the newer chassis so you can use the current gen charger drivetrain/interior and graph it into a convertible style while steering away from just using the challenger stuff.
@ericmeyer3264
@ericmeyer3264 7 месяцев назад
Consider a tram gauge for point to point. Tape measure might vary.
@camracing
@camracing 7 месяцев назад
I’ll have to take a look into one, I appreciate it.
@scottschuler9547
@scottschuler9547 7 месяцев назад
Cam looks really good do you have an idea of what size motor you're going to put in please don't put LS 😊
@camracing
@camracing 7 месяцев назад
It won’t be an LS, the engine reveal will be saved for a later date
@sev3nsix485
@sev3nsix485 6 месяцев назад
Wow just stumbled onto this channel. I can’t wait to see this beauty being worked on. Are you building a custom frame?? And how do you know what dimensions to use?? This looks awesome so far!!!
@camracing
@camracing 6 месяцев назад
Thank you. I will be building my own chassis, yes. I started on one around this time last year but I may switch routes to a full tube chassis. As for the dimensions, it started out as a complete car so I mounted it to the table and took a lot of measurements off of pickup points. Old Chrysler manuals and forums have helped with them as well.
@sev3nsix485
@sev3nsix485 6 месяцев назад
@@camracing after asking my question I went back in time to binge watch the series. Can’t wait to see the finished project. Enjoying the content. New subscriber as well.
@lennym1636
@lennym1636 6 месяцев назад
Make a mold of the fenders and then make some out of fiberglass...
@VinnieboyFE
@VinnieboyFE 7 месяцев назад
Looks great! How wide is your storage unit?
@camracing
@camracing 7 месяцев назад
It’s a 10’x20’ unit
@Automated14
@Automated14 6 месяцев назад
If you need fenders anyway, how about converting that nose to 68/69? I have a 68 so I’m biased
@camracing
@camracing 6 месяцев назад
69 is my dream car, but this one will stay a 70. I’ve come to like this front end style now
@Automated14
@Automated14 6 месяцев назад
@@camracing fair enough, sir! Really awesome project. I feel this is the future for all but the rarest of the rare muscle cars. Those deserve to be preserved in factory form. As for the rest? Have at it! My 68 started life as a granny Charger 318/auto. It now wears stripes, 440, efi, 18’s/17’s and 4 wheel discs.
@Jon-O.
@Jon-O. 6 месяцев назад
Stupid question. Wouldnt building the inner substructure of the car body first be a better way?
@camracing
@camracing 6 месяцев назад
More than likely, if it were going back to a factory style chassis/inner structure. I am building a full chassis for this car, so those measurements will be based around the body.
@Jon-O.
@Jon-O. 6 месяцев назад
@@camracing I see so it's going to be more of a race chassis rather than oem factory spec.
@swakage13x
@swakage13x 6 месяцев назад
That's awesome but me personally I would use every part I could when it came to exterior body panels that did not include the rear quarter panels or trunk or rear bumper to make my own equivalent of a modern day charger and make it look like it should have instead of that hideous 4 door
@hooligangeneral300
@hooligangeneral300 7 месяцев назад
Did you sell your built model cars? I have heard people do that but not sure what kind of prices they bring. I’ve had many many years building models. Just curious about it if anyone knows.
@camracing
@camracing 7 месяцев назад
I did sell them, yes. I mainly built commission models, so replicas of customers cars.
@projectundrfire
@projectundrfire 6 месяцев назад
Wouldn't scratch mean you forged, molded and re created a design that someone else did...right?
@trickytrex5442
@trickytrex5442 2 месяца назад
Where did you find the parts for this
@camracing
@camracing 2 месяца назад
Auto Metal Direct (AMD) carry’s everything👌
@homer714
@homer714 7 месяцев назад
My boss has an original 70 charger rt/se if you need any pictures or measurements for reference let me know
@camracing
@camracing 7 месяцев назад
I appreciate it man, I’ll keep it in mind
@MrThestevster
@MrThestevster 7 месяцев назад
How do you get away with doing it in a storage place?
@camracing
@camracing 7 месяцев назад
On good terms with the property owner and I help him with a few projects here and there. I lucked out.
@nittygrittygarage5497
@nittygrittygarage5497 7 месяцев назад
Sadly bud, I think this is probably the best name for the project bud lol (it’s 100% for the best of the car though)
@camracing
@camracing 7 месяцев назад
It will be worth it
@AdamJacksonn
@AdamJacksonn 7 месяцев назад
no it wont. quit.
@nittygrittygarage5497
@nittygrittygarage5497 7 месяцев назад
P.S.: A good name for the charger would probably be Theseus
@camracing
@camracing 7 месяцев назад
@@nittygrittygarage5497that has been the unofficial nickname haha
@kramer26
@kramer26 6 месяцев назад
What are you doing for chassis and main structure?
@camracing
@camracing 6 месяцев назад
The plan is to build a tube chassis for it. If you look through some of my past videos, I’ve started on some of the main pieces for it.
@kramer26
@kramer26 6 месяцев назад
@@camracing nice. I've always been a Mopar fan n would love to do something similar but finding this in the UK is very difficult n expensive n importing from the US is always a risk, and again, very expensive, especially for large body panels! I just get my fix from watching Graveyard Carz lol 🤣
@ChrisJones-qj4xz
@ChrisJones-qj4xz 7 месяцев назад
Hey man. Who's the music from?
@camracing
@camracing 7 месяцев назад
RU-vid has their own library of music, I generally select it from there or an adobe program.
@firedemon2166
@firedemon2166 7 месяцев назад
Is this a real Charger (any parts from a real charger and VIN) or just a replica made body?
@camracing
@camracing 7 месяцев назад
It is a real charger. If you look back through some of my videos, you can see what it started as. It was a complete car, but a very rough one.
@Rebecca_The_Dragon
@Rebecca_The_Dragon 6 месяцев назад
Ok so...do you have the title to a VIN or are you literally building it from SCRATCH with no VIN? If so, how does one do that, legality wise?
@camracing
@camracing 6 месяцев назад
I have a vin and title for the car. If you look back through some of my videos, you can see what it started as👍
@StudioDaVeed
@StudioDaVeed 6 месяцев назад
Music SO bad I had to bail.
@jofat1266
@jofat1266 7 месяцев назад
What's with the gay music
Далее
HYDRAULIC PRESS VS ARMOR, USA AND RUSSIA
10:16
Просмотров 395 тыс.
Chemical dipping a BMW 2002 turbo
12:31
Просмотров 702 тыс.
Building a Custom CHASSIS TABLE From Scratch
17:25
Просмотров 18 тыс.
First Look at the Cars from Fast X
14:45
Просмотров 2,2 млн
FIELD FIND 1970 Dodge Charger rescued for $1,000!
13:07