Building a 1987 RC Car: Tamiya Lunch Box CW-01 Chassis Build (Time Lapse)

Подписаться 24 тыс.

Просмотров 7 тыс.

50% 1

Time to build a real classic! The RC Elf visited Scandinavia ... and brought me my first ever Tamiya Lunch Box! First released in 19987 and now one of the most famous Tamiya RC Car classics of all time. This is the 2005 re-release and the Black Edition from in 2012. Completely (well, almost!) stock! Let the Fun Begin!
Watch the complete unboxing here: • My First Tamiya Lunch ...
Body and first runs coming up soon ! More info below!
Thank you for watching!
Subscribe here for future RC content: www.youtube.co...
Second RC channel with vlogs, reviews, updates, behind the scenes and more RC cars: / @nordichobbyvisions719
See the video list in my channels for many more previous RC videos!
New videos every week!
Please comment and like ... if you like! Subscribe and "Ring the bell" to stay notified! Don't miss out! All support is greatly appreciated!
Happy Hobby Days and Keep 'em Running!
See you soon!
----------------------
This is the complete build of the chassis of the Tamiya Lunch Box 2005 Re-Release Black Edition from 2012. As close to stock as possible with standard Tamiya electronics and ball bearings.
It's been a while since I did a time lapse build. So here it is! Apart from the time spend locating the correct parts and screws this is the complete chassis build. Including my mistakes and corrections along the way.
I am sure there will be plenty of comments over time suggesting (commanding?) upgrades. Well, this is my first Lunch Box and I wanted to experience it completely stock. Over time I am sure there will be added a few changes: Stronger body mounts, oil filled shocks, transmission brace, stronger servo, and maybe even a bit faster motor. But that is for another time. Now I must get the body finished so I can go out with it and enjoy the my first run!
Tamiya Lunch Box 2005 Re-Release Specifications:
2012 Black Edition (Item 58546)
First released in 1987 (Item 58063)
First re-release in 2005 (Item 58347)
Scale: 1/12
Drive Line/Transmission Type: 2WD (Rear Wheel Drive)
Hard Plastic Body
Hard Plastic CW-01 Chassis
Length: 385 mm
Width: 290 mm
Height: 225 mm
Weight: 1560 g
Springs (non-oil-filled)
Plastic & Brass Bushings
Electric Motor Included: Mabuchi RS-540SH Brushed 27T
ESC Included: TBLE-04S 75A Brushed/Brushless (2021 release)
Black plastic body & wheels, manual & decals special to the Black Edition
Optional parts used (this particular unit):
Tamiya TEU-105BK ESC
Tamiya TSU-03 Servo
Tamiya TRU-08 Receiver
Tamiya Finespec 2.4G Transmitter
Carson DT-01 Full Ball Bearings
-----------------------------------------------
#NordicRCVisions Statement:
This video features homemade footage of my own #RcCar #TamiyaLunchBox #TamiyaLunchBoxBlack #TamiyaRCCar #TamiyaClassic #TamiyaMonsterTruck from my personal #RC collection. All rights reserved.
All #RcCars and RC parts in this video are hobby-grade and intended for adults and ages +14 years.

Опубликовано:

11 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@madsrcbuggy 2 года назад

Oh, I missed this video, almost at least... Happy I finally managed to watch it, very pleasant to see this car come together, and you added the testing as well... It's quite torque'y when you hold it with just one hand, as you found out, ha ha! I'm looking forward to next episode, see it fully assembled, and of course a run video, too! Have a nice weekend there!

@NordicRC 2 года назад

Hi Mads! Ha ha, yeah, a bit more torque than I expected 😅😅 Final result up now. Building the actual car was easy compared to the body 🙃 Hope you are having a great Sunday in Finland

@hollyhillrc 3 года назад

Welcome to the Lunchbox club. Prepare yourself for an enormous amount of fun 😁👍👍

@NordicRC 3 года назад

Thank you, Derek! And thank you for tempting me with your own Black Edition 😊

@menso3852 Год назад

Gotta say i'm loving your video. I'm building a 3d model of a lunchbox from reference images and videos found online. I don't actually currently own a lunchbox. My mum threw my childhood one away (i suspect). Mums have a lot to answer for. Anyway I'm about 1000 hours in and your hi def video that shows every single angle of each part being assembled is really helping the process.

@NordicRC Год назад

Very cool project you got! And glad the video was helpful

@MarkBryanRC 3 года назад

Goddag, Mikael! I bet you really enjoyed putting this one together, such a simple chassis, but just so Tamiya! Hehe, I see you had your first Lunchbox crash on the workbench! Plenty more to come when out on the dirt and grass, but this RC can take a beating and come back for more. Can't wait to see the body finished and your new truck in action. Take care, friend! 😁

@NordicRC 3 года назад

Goddag, Mark! You are very right - such an enjoyable build. Reminds me so much of building a Hopper - just a really chubby one 😊 Ha ha, yes, it already started wheelin’ in my hands 😅😅 A good start I would say. Take care my friend and enjoy the Sunday.

@PeteWylieRC 2 года назад

Hiya Mikael. Hooray your first lunchbox build! Love the mournful music to go with this rather comical truck! Obviously too much power as you couldn't keep hold of it! Anyway be good to see it completed. I'd go brushless but you know me! Have a great weekend matey 😁

@NordicRC 2 года назад

Hejsa Pete! Yeah mournful music to a comical truck. My kind of combo 😅😀 Uhh, I think I will try it stock before I try anything else … it might already be too powerful for my driving skills. Couldn’t even hold it without crashing it 😂 Hope you are enjoying your Sunday Pete

@ronniecreason7870 3 года назад

Lunch box is Dope

@NordicRC 3 года назад

Hi Ronnie! I agree 😊

@camrowdrone6497 3 года назад

Love my lunch box, I used soapy water when adding the stickers , gives you a second chance when you got big fingers 👊🏻👍🏻

@NordicRC 3 года назад

Looking forward trying it out! Yeah, seen some people do it too. It’s a good tip. I messed up the paint job a little so I think I will just try to see how it goes the usual way 😊 It can’t get any worse

@rexrcs 3 года назад

This elf, making quite the elf family, hes incredible

@NordicRC 3 года назад

He really is remarkable and generous!

@robbrennanrc 3 года назад

I hope the build of this beauty was enjoyable Mikael. Fairly straight forward but those shocks were a bit weird and fiddly. Looking forward to bodywork video. All the best and hope you and the family are safe and well.

@NordicRC 2 года назад

Yeah, the shocks where weird to assemble. Otherwise it was pretty much like building a Hopper. Bodywork video up now. All the best to you too my mate. I enjoyed the videos with your black edition

@UncleBobsRC 3 года назад

Awesome build again my friend!!! Watch out for that torque, those things will jump right out of your hands (Been there, Done that). I to will soon be joining the CW-01 chassis club (but not a lunchy), my first ever as well!!!! ATB to you & yours my friend, stay safe and stay healthy!!!

@NordicRC 3 года назад

Thank you, Bob! Ha ha, yeah, I better hold on a bit better next time 😅 Nice with your CW-01. A Pumkin’? All the best to you and yours too my buddy

@UncleBobsRC 3 года назад

@@NordicRC You are very welcome my friend. The "RC Elf" got us a CW-01 kit, should be here tomorrow. I'm not saying what one yet. LOL

@HaydadRC 3 года назад

Very nice build Mikael; big,big fan of the Lunchie! I really like the black wheels, quite sharp!👍😊 The RC Elf is truly remarkable!😀

@NordicRC 3 года назад

Hi Jeremy! Yes! Looking forward trying it out after years and years of watching it on RU-vid 😅 And yes, quite remarkable ! I noticed a recent thumb mail from you too ! Looking forward watching the video later today

@EnjoyLifeLikeaKid 3 года назад

Great stuff. Love it.

@NordicRC 3 года назад

Thank you! Love your name 😊 That’s what it is all about this hobby

@Manufalket 3 года назад

Super like 🤩👍

@NordicRC 3 года назад

Thank you my mate!

@theoagrc 3 года назад

Looks really neat! Bet you can’t wait to get it out running?? 🙌🏻

@NordicRC 3 года назад

Thank you! You got that right 😊😀

@Andym1159 2 года назад

Great build and you’ve inspired me to get one 👍 I’ve always wanted to do a lunchbox and I’ve found the black edition for £99.99 without the esc. I’ve a couple of Tamiya esc’s so I’m ok 🙂. I think the stock motor is enough power?? I’d go brushless but I think it may be too much for it?? Anyway great build great video and have a great weekend 🙏👍

@NordicRC 2 года назад

Thank you my friend! Nice you got one too now. It’s a pleasant build. And sounds like a good deal you got. I will definitely try out the stock motor at first. Think it will be plenty of fun for me to start with 😊

@Andym1159 2 года назад

@@NordicRC thanks Mikael and yes I’m going to start stock but like you the weather is not good over here in Wales. It’s winter so it’s cold 🥶, raining 🌧 all the time and finding myself not getting much run time so I thought I’d do a build and take my time. I’m just tending to go to my little HBX’s atm as I can take one out in a small shoe bag and when I find somewhere dry or the tide is out on the beach I can just let it rip. Have a nice weekend I’m staying in you take care 😎👍

@BasBoyRC 3 года назад

Great simple chassis a real classic. But not quite a 1987 chassis as the later ones had better steering rods.

@NordicRC 3 года назад

Hi Mal! Yeah, a real classic. Wonder what took me so long yo get one. The RC Elf provided the way. 😊 Ahh, yeah, but the Essence and Vibe still screams the 1980s 😊 But luckily also without the MSC 😅😅

@BasBoyRC 3 года назад

@@NordicRC It was a surprise it took you so long to own one, I had one when they first came out. 12AA batteries to run the radio and car receiver. Then the BEC converter switch came out to convert my old Acoms receiver and down to 8AA a blessing. Radio's in those days went though AA fast.

@MechanicallyFun 3 года назад

I'm never able to balance the left and right steering with this kit regardless I change the length of steering rod many times. Right turn is stronger than left for me. Do you have the same issue? Thanks🙂 Oh and I found that the HBX 1/16 oil shocks is a good replacement for this kit👍

@NordicRC 3 года назад

Hi bro! Not sure yet. Only tried once as here in the video. I think a stronger servo that is more able to self center could be good. Uhh. The HBX 1/16 shocks? I do have a set of those lying around. Maybe I should try it 😊

@MechanicallyFun 3 года назад

@Jessi I'm not sure, I'll take it apart and have a look. I've seen someone actually shift the servo to the side and it end up in the centre and have both steering rod same size. I might even try the Tamiya high torque servo saver, which may not be worth an upgrade as well as the front wheel is mostly up in the air 🤣 thanks