Building a Boat with Plastic Barrels and Wood in the House | by  

I think your boat needs an inner shell as a floor cover. In fact, the body should be two layers.

HDPE can be weded with hot air gun and is guaranteed 100%waterproof. With the nails sooner or later water enters

아주 멋진 배 입니다. 저라면 플라스틱과 목재 사이에 고무 타이어 조각을 넣어 밀봉을 할것 같습니다....

SUPER IDEA . POZDRAWIAM .

Ładny projekt łodzi! Ta, wykonana przez ciebie jest fajna ale wykonana wg. mnie dopiero w połowie. Brakuje przede wszystkim podłogi oraz zabudowy burt od środka. Bez zabudowy podłogi, stanięcie nogą na dnie łodzi grozi po prostu jej rozerwaniem i zatonięciem! Pozdrawiam

Now reinforce the outside of the hull with fiberglass for rigidity and sealing all the leaks that will come up when the mechanical resistance of the water roughens up and thins the plastic. The workmanship was good... But there is a best practice to making anything that floats on the water that significantly reduces the potential for accidents and/or failures in the material/construction.

ধন্যবাদ ওস্তাদজীকে আমি ১৯৯৪/৯৫ সাধু যোসেপ কারিগরী শিক্ষা গ্রহণ করেছি লেদ মেশিনে প্রশিক্ষণ নিয়েছি এখও এ কাজে নিয়োযিত আছি আপনার কাজে প্রসংশা করি খুবই চমৎকার হাতের কাজ আপনার।

More work than necessary. I would have made a couple of pontoons, built a frame and structure on top. Mounted a motor and been on my way.

While good work the best use of these barrels is in pontoon boats.

Hadir nyimak salam kenal dari kisaran city Asahan Sumut Indonesia 🇮🇩🇮🇩

Economiquement intéressant ,mais le problème c'est que rien ne colle sur le polyéthylène , donc pas facile de faire l'étanchéité !

Что то грызут меня сомненья что все эти соединения при помощи гвоздей будут достаточно хорошо держать , особенно в полу лодки когда люди начнут туда наступать изнутри давя на пластик рядом с деревом

That's a pretty awesome build. I don't know how we expected that not to leak. I think I put a roll of butyl and some stainless screws in. Let's go fishin!!

Nicely done! The difficulty is all the woodwork to get a solid wooden frame.

Very good job I likeit

Thanks for sharing sir Godbless

Love it . Looks easy enought. Built a few boats out of plywood, this looks great.

Greetings coming from Indonesia, healthy greetings and creative greetings

So creative. Fantastic.

wow very nice lake

👍 excelente y éxitos

I really don't think that butt jointing the wooden frames and nailing some plastic patches on will last very long.

Amazing tanks perkonsian nya cukup sempal best k

Araújo caiaque do Brasil

Excellent effort , viewing from Detroit Michigan USA 🇺🇸

This is pretty cool, not sure how safe these boats are compared to boats created in traditional materials such as various fibber or just wooden boats. I can imagine these are ok on rivers, but how does that plastic handle sea water? Also I think an improvement would be to use a heated wire cutter to cut plastic or a similar tool. And recycle the scraps too. Using a saw creates a lot of plastic dust, which is both bad for environment and everyone else, while also being very bad for the worker(s). Of course, just reusing the barrel for their original purpose would be an even better use.

Deffo fit for purpose 😊 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿😁✌️

최고 멋진 보트제작영상 잘보고 구독하고 응원하고갑니다 최고십니다

Genial!!.😅

It is better to weld the seams using a soldering iron and pieces of plastic. Polyethylene terephthalate should be welded. Or you can seal them with silicone sealant. Well, or spend 5-10 bucks on one or two layers of fiberglass, and also make a deck from the same plastic to make it easier to remove water, and add weight to the bottom to make it harder to turn over while standing on the water..

Goose wasn't bothered by the guy sawing right next to it.

Como proceder para ver experiment nav egabilidade de um desses barcos?

Excellent travail simple et moins cher je note 20/20 , j'aimerais bien si quelqu'un peut transmettre ça à nos frères en Afrique .Le bois augmente de prix.

Very nice!

On peut faire un bateau avec a peu prés tous type de matériaux, il faut tenir compte de la résistance, du poids et de la facilité a mettre en œuvre. le gars fait avec ce qu'il a sous la main, des barils en plastiques, mais disons-le clairement ce n'est surement pas la meilleure solution, la fibre de verre, le bois ou l'alu seront évidement bien préférable plus durable et fiable! bravo tout de même pour le travail et la patience! Je vois tout de même un inconvénient majeur sur cette réalisation, indépendamment de l’étanchéité qui pourrait être moins bonne a longue échéance, il n'y a aucun fond de sol rigide et si on pose les pieds sur les ptastiques en dehors des longerons de bois, il y a fort a parier qu'on pourrait passer a travers ou affaiblir l'assemblage.

1:00 I'm glad i'm not the only goose watching this!

Keep up the good work ...love making...

The video was incredibly informative and inspiring. Watching the entire process of building a boat from plastic barrels and wood was fascinating. Thank you for sharing such a creative and eco-friendly project. Highly recommended for anyone interested in DIY projects!

He is a true craftsman. Incredible!

My neighbor who was a brainiac made a catamaran using oil drums halves back when they didn't have plastic drums. He put them 4ea long ways and brazed them together Then added copper tubing over it. He reinforced the hull by also bridging it with copper tubing. When he was done he sprayed the bottom a lot of coats as he did with the inside. He put an aluminum wave shield in the front. He put a 20hp motor on the starboard side as he operated it on the port side. The first trial checked out but it was completely under powered. So he kept increasing the Hp until the boat balance out. Eventually heard it sank due to an retaliation for stealing someone's girlfriend.

wow... good job.

ich Liebe auch diese PE Tonnen daraus kann man viel Machen unkaputtbar

No deck inside? I'd probably step right through the hull... With all those tacks, this would be for calm, fresh water lakes only!

Nice boat

Verry nice

Cool 😊

Hay lắm xin cám ơn bạn

Wouldn't take it offshore or out of sight of land. Always wear a life vest.

Cool 👍

...and it creates microplastics with the saw blade cutting through the plastic.

Everyone has not been on a boat at some point in their life. you are extremely privileged.

Super

Amazing very nice boat making

Genio

Intelligent

В следующий раз сделайте и говна и палок!

Did not see any waterproofing did not see any silicon it would leak water.

最多玩幾日,隻船肯定自己解體!成隻船嘅結構只不過比模型船好少少!但模型船吾會坐人!😲😲😲希望佢自己用好啦,吾好害人😐😐😐😐😐😐!

слишком легкая, такие манёвры могут привести к перевороту, надо делать тяжелее.

Кажется в стыках не совсем герметично , или " все лодки текут - знай себе вычёрпывай " . Не мне плавать на ней .

الترجمة تحجب المشاهدة

not a ship it's a boat

Need some fiberglass now

ไม่ทนทานเป็นมลพิษต่อสิ่งแวดล้ม

A Ship!! Lmfao 😂 It's a canoe! 8hp way over kill for that with a flimsy transom! Crazy and dangerous!

What about the Kill Cord?

Yeah yeah, but shop duck! SHOP DUCK!

Recycling isn't using working barrels :D

whats wrong with screws instead of nails?

İskelet sağlam olmazsa bogulursun reis...

Benar berarti bagus😂🎉

help the environment by recycling (uses only new barrels) lol

접합부들 틈 사이로 물이 안 세게 하는 방법은 안 나오네. 가장 중요한 과정인데 ㅎ

That barrel he had in the front was full of water, the boat is too light for that motor and was trimming up way too high.

how does this not leak?

Jika rumahku dekat pantai pasti kubuat

На коленке, из говна и палок, Человек делает настоящую лодку лодку!

So did you just steal this guy's video and narrate over it?

Norm for river

I saw this video from its original owner :-(

техника безопасности почти нет . обтекаемость очень слабая.слишком лёгкая на развороте перевернётся.

Cheaper to just buy a boat . Here in Tampa used plastic barrels are $100 each

Ich sehe nur Mikroplastik

I think you need to make original content instead of stealing views from other creators.

Мужик молодец, рукастый. Однако инженерная составляющая слабовата- у лодки нет единого жёсткого каркаса, а потому вся конструкция получилась хлипкой, и для нормального использования не пригодной

So how did he really seal that PP?

Прочно ли это?

ボートの強度の基本となる龍骨から造るのでは無く…被覆する船体の形状に合わせて内殻を端材で釘打ちして防水塗料を薄く手塗りする…手の込んだ船外機付き手桶…命がいくつあっても足らんわ!!!まぁ池で水遊びするくらいなら趣味としてアリカモね!! 外洋に出たらお陀仏物件 by 沈水艦

Y quebnonfiltre aguaby se unda esta rarobeso

E tutto bello ma secondo me in italia non puoi metterla in acqua la legge quà fa schifo tutto vietato senza la normativa cee

Дешевле купить ПНД , чем бочку бу .

I am wonder, where can I get these plastic barrels ?

You need a helper

eso no tiene la categoría de barco. Es un objeto flotante.

De eenvoudige Indonesiers was al lang begonnen Out koek.😅En 😅

working w ducks

Я тебя слепила из того что было🤣

why nails?

Did the thumbnail make anyone else think this guy was going to hit a plank of wood on a water slide? Haha

Pang ilog lang..MAHINA DI MATIBAY...KULANG SA MGA SUPORTA.. DI ANGKOP SA KARAGATAN..BAWAL DAPAT ITO WALANG SAFETY