Building a Ford 9 Inch Rear Axle (The Easy Way)

Подписаться 756 тыс.

Просмотров 87 тыс.

50% 1

We put '79 Ford F150 big bearing axles on our Bronco with GearFX rear gear + Baer Brakes!
Subscribe to ‪@DGHD‬ | Merch: debossgarage.com/merch
Watch more episodes of this build: debossgarage.com/build/juiceb...
Thanks to our partners & sponsors for making this happen!
‪@toyotires‬🇺🇸 ‪@toyotirescanada‬🇨🇦
‪@HolleyPerformance‬
‪@Pennzoil‬
‪@peakauto‬
‪@BaerBrakesVideo‬
‪@Softopper‬
‪@SummitRacing‬
‪@gearfxdriveline7047‬
‪@Tmiproducts-Upholstery‬
‪@ididitinc‬
‪@LyellStainless‬
‪@EnergySuspension1‬
‪@DesignEngineering‬
‪@Usshift‬
All 4 Fun Offroad all4funoffroad.com
We are leveraging our partnerships with preferred automotive brands to get you significant discounts on tools, conversion and performance parts that deliver across North America and around the world so you can save money on your projects. debossgarage.com/membership
TOOLS & PARTS USED - Find the best prices using our affiliate links:
1979 F150 Axles (Early Big Bearing)
GearFX 9" SVO 4.11 Rear Gear geni.us/svo-411
Rear Brakes geni.us/baer4262261
Front Brakes geni.us/baer4261558
ReMaster Cylinder geni.us/baer-2bolt
Motor Mount Brackets all4funoffroad.com
TMI Seats geni.us/sport-r-lowback
TMI Console geni.us/sport-r-buddyseat
TMI Back Bench geni.us/sport-r-48in
Soft Top geni.us/softopper
Radius Arms geni.us/all4funlongtravext
Milwaukee Super Hawg geni.us/superhawg-12in
12.3" Pro Dash geni.us/123in-dash
12.3" Pro Dash (Standalone) geni.us/123in-dash-unltd
Holley Sniper EFI geni.us/550-511
LT285/75R16 Toyo Tires Open Country A/T III geni.us/opencountry-at3
Pro Comp Series 69 Rims 16x8 - 12mm 5x5.5 5x139.7 geni.us/procomp-69
All 4 Fun Offroad 6-point rollcage geni.us/br12
0:00 Coming up
1:41 Not really a high pinion
2:31 Big bearing or small bearing
6:43 Cleaning the rear axle
10:54 GearFX 4.11 Ford SVO N-Series
13:37 Axle shaft assembly
16:40 Measuring the axle & studs
20:26 Timken bearing & seals
21:03 Baer backing plate
25:17 Baer brake rotors
26:05 Baer brake calipers
27:24 Pennzoil 80w-90 GL-5 Gear & Axle Oil
Follow us:
debossgarage.com
/ debossgarage
/ project.black.jack
/ debossgarage
/ debossgarage
Send stuff to Filthy Rich
411 Darling Rd, Canfield, ON Canada N0A 1C0
Merch, Tape Boss & Car Parts: debossgarage.com/store
Tools I use: www.amazon.com/shop/debossgarage
Show us your build project: debossgarage.com/nation
Help us make awesome stuff: debossgarage.com/membership
Watch More Deboss Garage:
bit.ly/DG_EngineSwaps
bit.ly/DG_AutoShows
bit.ly/DG_Reviews
bit.ly/DG_HowTos
bit.ly/DG_QuickTips
About:
From American Muscle to Classics to Diesels, DG will show you how to build, swap, and repair anything with a throttle.
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
Theme Song: "Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
All Songs: / deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
© Red Egg Entertainment | made in Canada
--
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE ("DG") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DG specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DG recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DG assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DG.

Авто/Мото

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 176

@dereksimenac8844 Год назад

You know deep sockets fit through the hole in the wheel flange to remove the axle retainer bolts!

@centraltexasfoxbodies Год назад

Came here to leave the same comment

@dave1135 Год назад

Same here, worked at a dealership, done a ton of them. Got to beat flat rate.

@bearfoot25 Год назад

Same here!!! I was going to say the same thing. That and the 9 inch is not a High pinion.

@travissynnestvedt7468 Год назад

The first time I took mine apart I did the same thing he did. Then when I finally got the axle out I looked at it and noticed the hole that would be perfect for a socket to fit through.

@mittenstategarage9093 Год назад

@@bearfoot25 It's a high pinion if the rear end is upside down, like in the beginning of the video lol

@scottyknot7403 Год назад

It never gets old seeing the true customizer of custom parts keep customizing everything he touches.. your a legend. Love the channel and the hard work.

@DEBOSSGARAGE Год назад

thanks man

@scottyknot7403 Год назад

@@DEBOSSGARAGE thank you.. I spent 5 years out of the business, I used to fix and restore 77 to 96 Ford trucks.. and I'm slowly finding my hands again . I don't know if I'll ever make a business of it on a day to day basis once more but I'll keep doing my own major repairs just because if your not filthy your not rich... . Alot of it was just you being a genuine mechanic. I forgot how fun it was and how much it got me to get up everyday.. I'm a city mile 37yrs old.. lately I don't feel as old anymore. Be safe and don't hit nothing but the brakes out there. Your an inspiration. If your ever around Tampa I hope I find a way to shake your hand just for a simple thank you and a big dinner is on me.

@saltymofo5870 7 месяцев назад

Ford axles have a hole in them so you can use an impact, or ratchet to remove the retaining nuts, just rotate it around and you can get all 4 nuts very easy😎

@larrydavidson3402 Год назад

Anxious to see the Bronco come back from the body shop with a new paint. That is going to one of a kind Bronco.

@DEBOSSGARAGE Год назад

the video is getting edited right now, but it is back home pretty well out back together

@dennisthompson7707 Год назад

I'm sure you noticed after you said the 9" is high pinion you had it upside down, the 9" is actually a low pinion. Great video, I'm getting ready to go through one for my 61 F100 4x4 upgrading from a small bearing axle. I've love watching this Bronco build.

@mikekuschka998 Год назад

The true easy way is to have someone else do it. Keep up the cool videos.

@NoWr2Run Год назад

YES, 100% I'd be lost doing this rear.

@danf4616 Год назад

"Borrow Grandpa's old Lincoln AC stick welder in the corner..." Yep. Now it's in the corner of my garage! Pretty sure those things never die. They just get passed on. 😁

@kiiiisu Год назад

haha thats funny :D

@mikejburns Год назад

As a farmer who only ever uses a lincoln stick welder.. it is true.. my boys will learn how to weld with it, and it will be theirs eventually..

@nbrowser Год назад

Rich, right at about 4:27 when you started talking about the brake conversion and how it's important to upgrade the braking power to match to go power...not many folks think that way. It's just as important to WHOA as it is to GO!

@davidgleason6400 Год назад

Rich…two videos in one week…I couldn’t have asked for anything better. Love the content…excited to see the Bronco back from paint, the 55, C10, and waiting to see the wrap up on the F-tree-kitty! Best channel on you tube! Take care and God bless…David.

@grooveguy Год назад

Hell yeah Baby, DeBoss is in da house!!!!! Keep on dropping Vids Aaron. Absolutely loving the content of late Rich!!! ♥️♥️😎😎💯

@420Schmat Год назад

Can't wait to see it come back from paint

@RunninDPerformance Год назад

years ago, i used to drag race my daily. Roll up to the track, hop it up on the jack stands, 5 lugs per wheel, four bolts per axle, two for the drive and ten for the pumpkin, roll the street-able 3.23's out, drop in the posi 4.11's, reverse the process, switch to the fuel cell, give the dizzy a twist, and voila. an afternoon of fun... reverse the whole process and drive home dirty happy and truly satisfied. I caught shit from almost all of the trailer queen guys, and got some crazy envious looks from the built-to-barely street-able Chevy and Dodge guys, but my little F-100 kept it simple and me happy. The only real learning curve was the timing offset. but two fingernail paint marks when i got her good, stayed pretty true.

@truckericksdashcam Год назад

Some hot rodders like to gusset the rear of the pumpkin and drag racers truss the whole thing from flange to flange . One thing you might consider next time , install a drain plug . Nice work Rich , keep it up . 🙂

@justinwatch Год назад

That ain't no pumpkin, boy. That there's a hogshead.

@oneoldmansgarage7880 5 месяцев назад

I represent the remark about the stick welder in the corner Rich! 😁 I do have a mig welder now though.

@swampy6x659 5 месяцев назад

Axle depth into carrier . 1st I use painters/masking tape to get a rough measurement . 2nd use a ""special tool dog bone "" insert axle and take measurement from axle end to window in dog bone ,,lathe cut to suit . 3rd check your work ..... Once u have axles with bearing assembled install axle NO COLLAR YET and measure end float . Machine seal surface by hand on wet/dry paper to get end float . Once done press on collar . GM tapered roller are available with different thickness seals . Always had to machine seal

@dennisbailey4296 Год назад

Just wanted to compliment a Great Canadian that is made a channel very very very professional and it looks and feels as good as anybody's on RU-vid! Being from BC it's just great from my point of view to have a great Canadian be doing good work and giving a good quality build each time he does it!! All the best from Surrey BC Canada

@DEBOSSGARAGE Год назад

thanks eh!

@brianhaw9398 Год назад

Check out Make it custom,from BC and Halfass Kustoms from Manitoba

@craigmandall9420 Год назад

Nice of Baer to make calipers in Juice Box Brown for you

@Adrianzx Год назад

because the 9" pinion engages the ring gear very low, 2 pinion gear-teeth are meshed with the ring gear at all times. That results in more friction/heat being generated, and less hp getting out to the axles.

@braedon.builds Год назад

First time I’ve seen an in-depth video and an explanation on the popularity of the Ford 9”. Looks like a much easier set up than some GM diffs. Might have to upgrade my C10 with one!

@gerardfenn3988 5 месяцев назад

Watching this and loving it. That Baer Rotor sure looks super beefy. Just a little better than OEM, eh? Pricey yes but I guess it's buy the best once and cry once. Stop On A Dime surely.

@CloudHindlen Год назад

My grand dad's R2-D2 stick welder was actually stuck on one setting and I used it quite a bit growing up. It worked pretty good...then I bought a Hobart stick welder then officially retired R2-D2 back to the corner of the garage. 😂

@codymeyer1455 Год назад

Ball joint press and a 1/2 impact works awesome for installing wheel studs

@jayxtreme6 Год назад

BTW although the limited slip additive doesn't do any damage, it does reduce effectiveness of truetracs. They need some friction to work, so gear oil without the additive works better. Try it out and see, if the truetrac doesn't live up to your expectations just try a different gear oil.

@bbroken1 Год назад

Killer can't wait to see the bronc all done up 👍

@Xicor37 Год назад

Aaron is the best editor on RU-vid, bar none.

@K3NnY_G Год назад

All this time into this series and I still can't get over how good that damn intro is. (They all are)

@tomcleghorn4005 Год назад

Love this channel. So inspiring

@shanethompson7543 Год назад

Another awesome video 👊

@ricardorodriguez-se7tp Год назад

NOT THE ORANGE SILICONE 🤣🤣🤣🤣🤣🤣🤣

@stanleymartin1613 Год назад

Great video. Enjoyed watching ✌️ 😎

@Prariedog Год назад

Great informative video Always learning from you Thanks for sharing

@fonhollohan2908 Год назад

Can't wait to see this think after She's painted.

@richardthomas1743 Год назад

Lets do this!!

@michaelblacktree Год назад

I love the intro music. Not only is it period correct for the Bronco, but also period correct for me. 😎

@XK4153RX 3 месяца назад

What is the song on soundcloud?

@dwightmcintosh8511 Год назад

Rich thanks for another excellent video. I struggled with a Chevy differential until finally giving up and taking it to a shop but when you put it together yourself you know every detail and can enjoy it that much more when you’re tearing up the track.

@coreyandkristi Год назад

When using a tape measure and starting at the 1" mark, we always call it "burning an inch". Not sure why, just what we've always said!

@starinthesky8663 Год назад

beautiful!

@christopher20008 Год назад

Great job

@ricardboswell7490 Год назад

Thank you you saved me a lot of ti built Several 9" in my lifetime none with this break

@TheFastgeek Год назад

"... not going to paint the axel now... we can paint it anytime" *poof* Axel is suddenly painted. Feel like something might've been missed. 😉

@DonVDBorgh Год назад

Yep, my welder is an old Lincoln AC/DC bought at an estate sale for $125 w/long cables. Been doing me well for 15 years now. That went a bit smoother than the California driveway build. 👍👍

@Watchyn_Yarwood Год назад

And if you can't borrow a welder to get the race out, here's what I did on my Jeep. Can of air duster, turned upside down, spray it until the race is frozen and it popped right out.

@isaakunger7324 Год назад

Hoping to see your projects at the show

@adrianspeeder Год назад

It's still a 9". 8 lug full floating swap for life!

@markhammelman6995 Год назад

loved the welder comment!

@bigbird2100 Год назад

Great video 👍If you borrow your dad's or granddad's old stick welder then use it to weld the old collars or bearing's and then knock them off.

@coltonkruse2313 Год назад

Hahaha man all I have is the old stick welder. It gets me by for the repairs I make. So far I have been too cheap to buy my own MIG and I haven't actually needed one although they are obviously way easier to use. Someday I'll buy one.

@ryanc8188 Год назад

One thing you can do is get a 1/4 driver extension like what plumbers use for spade bits, then it won't fall off because it has some set screws to keep the end in place.

@jimmiehill9691 Год назад

Try a chimney brush to clean your housings.

@jeffdejong3786 Год назад

I have a 44 spline Currie built 9” with a spool. Disc brakes I would let go for about what you have in this diff. And a matching front Dana with track lock for not much more. I had it in a 71 k-10

@zackting622 Год назад

That's funny for the Lincoln welder have the corner on my dad's little work area and is now mine not even a month or so ago

@johnhenry8424 Год назад

I do it twice for you guys. Nice recovery !....lol

@olnamgrunt9857 Год назад

Haha, I saw what you went through with the California trip, stay safe friend.

@elesjuan Год назад

Bitchin! Love ya Rich! Can't wait to see Juice Box together!!!

@Camcodrummer Год назад

You can use brushes for boiler flue to clean out axle tubes.

@markharper4166 Год назад

"You're more manly than me." Awesome heritage.

@travisshephard5491 Год назад

Unless those aren't the correct axles for that housing you shouldn't have needed to cut them. And Eaton does state the true trac will not work optimally with the limited slip additive added in as it works by sensing the friction load. The additive will throw it off.

@g_force3857 Год назад

Hey bud… BAER will tell you to use studs with a shoulder on them and not mount the rotors on the thread, the rotor will move under hard braking apparently…. Interesting approach to the way you did this, certainly not how I do it but you got same result 👍👍👍 Looking forward to seeing it finished

@SCOPELITUS Год назад

So are you filling the gear oil with the axle upside down? Thought you said it was a high pinion gear set? It's low when you filled it.

@bearfoot25 Год назад

Also, you will need a longer drive shaft for the 9 inch. The pinion doesn’t stick out as far. (That Yoke you are using might make up for the difference though.)

@stevearsenault4898 Год назад

When removing the 4 axle retainer nuts to remove axles, use the hole in between the wheel studs to remove the 4 axle retainer nuts. That's what it's there for !

@stevearsenault4898 Год назад

@DEBOSSGARAGE1

@blindtomsadventures2067 Год назад

To remove the actual retainer bolts there’s a hole in the axle you can use a socket next time and extension and impact

@lucassvedlund3851 Год назад

@debossgarage which project was it where you got some super nice looking custom made headers? I think it was for a truck build but I can’t find it

@sa230e Год назад

Underdogs by Matthew Good Band was a great album.

@Torch4ya Год назад

Brother, You need Lubelocker diff gaskets. Trust me 😆

@paulthompson1654 Год назад

axle tapered roller end float .000---.012 new bearing . Max allowable used .024 Machine lip of mounting seal edge. Use Loktite either shaft LOk or bearing mount mid strength on splines of wheel studs . Baer brakes way better than some Wilwood versions .

@jyrrays Год назад

The hole in the hole in the hub is to get your extension through, you could use power tools.

@jes8235 Год назад

Respectfully, Are the parking brake brackets/ backing plates upside down? If there were drums, I would get it.... Most of the Wilwood and Baer kits I have installed through the years seem to have your parking brake cable located at the top... It would also leave that hole at the bottom so water does not develop at the bottom... I have also not seen this style where they slot the backing plate, new design?

@jacksonmarshallkramer5087 Год назад

40 inch Boggers or Super Swampers on 15 in rims would be cool.

@brentwelin3612 Год назад

The 1979-1994 toyota 4x4 pickup has an axle like the 9 inch tough as nails

@michael86532 Год назад

Are the rotors backwards?

@briantoga2626 Год назад

Old dodge front loads have a hole axles to bolts out flanges.

@stans5270 Год назад

Rich, that would be my uncle selling crap about your welding [but probably not]. He TIG welded subs during WWII. All the welds needed to be perfect.

@staceytumbleson7379 Год назад

I did the same thing on my 67 and my cousin showed me the hole in the flange

@malcolmyoung7866 Год назад

Measure once…. Surprised you’ve not invested in a Tape Boss…Dunno but some geezer invented one a few years back. Might be still available if you are very lucky… 🤔😏

@MacGyver-1 Год назад

Side note, the Ford 9 inch although being strong , it has the most friction when compared to other ring and pinion designs.

@davidrice4873 Год назад

7:10 for some reason I'm getting flashbacks to peg breaking a front axle and just shoving all of the mud and sh!t right into the diff

@baja5000 Год назад

lol I have to Oregon. Oreg-en or Oreg-in not so much Ore-gone But on a more serious note. I've never seen a 9" ran as a high pinion, I think you have it upside down. They do make a "Hi9". Am I wrong? I would love to have a high pinion 9" but I literally just built my regular full width like you did.

@dws5951 Год назад

" N " is nodular iron casting..very strong.

@Tinman97301 Год назад

👍

@wyattcollins6755 Год назад

I just used a hammer and punch to reinstall my bearings press is nice but not necessary.

@traumgeist Год назад

You are so good at masculine mythology speeches, it’s a shame you aren’t doing voice overs for pickup truck commercials (Yes I realize you were being sarcastic when you were talking about the welder).

@bearfoot25 Год назад

Shock mounts on that 9 inch are the same as what’s on your Bronco. Unless someone changed the set up of your Bronco. The shock mounts are in the same place pretty much from 1978 to 1996 on all the Broncos and F150’s.

@ungdern Год назад

You do realize that the large hole in the axle is for taking out the bearing plate bolts

@DEBOSSGARAGE Год назад

yeah, used it to tighten it again. I'm learning too!

@ungdern Год назад

Hey,brain farts are the way of life! Also hi from Saskatchewan 👍🏻

@deadeye4543 Год назад

Rather than beat the wheel studs in place use a nut and hardened washers to PULL the stud through the flange.

@quentinwarner5567 Год назад

There’s a hole in the axle so you can use a socket instead of a wrench

@jamesflake6601 Год назад

There is no E on the end of Oregon. It's still here. Frickin canAdians

@davidwalk9045 Год назад

Yes, a good video with just Rich. No goofy guess ......

@JimLahey21 Год назад

Did you paint the diff with a mop? 😂

@tealstutzman7589 Год назад

Please om606 swap a minty s-10 or ranger

@keithmunz4160 Год назад

So let me make sure I have this correct. In Canada you have a nice heated garage with all the tools. California you have a driveway and NOTHING else, deer sorry. One place you build a 9 inch, the other you buy one complete.

@CarswithNash Год назад

Cool, but the driveway version was actually more entertaining.🤷‍♂️

@DEBOSSGARAGE Год назад

a lot more fun with friends too

@davidmowat4056 Год назад

The 9” isn’t a high pinion. Unless you buy an aftermarket from Currie. The one you are using is clearly a factory style low pinion. The Dana 44 you have for the front is high pinion though.

@garydeaton1661 Год назад

If. It has taper bearing it is old big bearings

@mikenicholson2548 Год назад

Rich ahhhhhhhhhh why gasket sealant it has a gasket. Drives me nuts

@leemer1 Год назад

Anyone notice the chapter names dont correspond with the video?

@DEBOSSGARAGE Год назад

Thanks for noticing and commenting. We fixed it!

@leemer1 Год назад

@@DEBOSSGARAGE was this a hint the next video is the Bronco`s body work?

@DEBOSSGARAGE Год назад

@@leemer1 not a hint but that is next for the Bronco

@leemer1 Год назад

@@DEBOSSGARAGE looking forward to it Rich!

@centraltexasfoxbodies Год назад

9 inch rears also require more power to turn which is why alot of people have been going to ford 8.8 axles plus they are in so many vehicles and come with factory disc brakes if your a junk yard scavenger

@djdaxster Год назад

@2.21 The Ford 9" is not a high pinion differential.

@Whopoopedinmypants Год назад

Details a low pinion lol

@keithmerchant225 Год назад

There is a HOLE in the axle flange between the studs AND that's so you can put a scocket through to get the 4 nuts off. you didn't need to do what you did.