Building A Freehand Pipe | First try - not too bad! 

That is actually one of my bucket list projects. Assuming you used Briar wood for the bowl. The acrylic stem with the white lace through the black was a nice touch. And who doesn't love the look of real copper like in the band. Loved this one.

My Uncle smoked a pipe and had a few of them , I think he would have been proud to have this one in his collection . Beautiful piece of Art mate.

A beautiful work of art!, well done to you. Best wishes. Gérard.

You are a beast. All freehand bandsaw and rasp. Beautiful. Thank you

Oh my! Auch als Nichtraucher darf ich das bewundern! Was für ein mega Projekt!!!! Eine der schönsten Pfeifen, die ich je gesehen habe! A piece of art for sure!

My godfather smoked a pipe. I can still remember the tobacco smell to this day. I don't know if he had anything as lovely as this in his collection. Thanks for sharing!

VERY NICE !!! To newbies, When " Roughing Out " Materiel, Always leave X-Tra - One can always remove Materiel , But , Once Removed , You can't put it back ! ALWAYS, Safety First , And , HAVE FUN !!!

If you ever decide to do this again, I would recommend drilling the holes for the bowl of the pipe and the stem before you take off the extra bulk in the pipe.

Very nice pipe, i gave up smoking 30 years ago, but i still sometimes fancy a smoke.

I just got in some Saint Espresso, I'd pack that into this pipe on its maiden voyage. Beautiful pipe, brother.

Nice Job! I love the contrast between the wood and the acrylic! The copper band is a perfect transition. LEGIT!

Brilliant lovely job.

That's beautiful!

That’s a beautiful pipe, I don’t smoke but now I want one

Took mine off the tree and then use one single electronic device. I appreciate your work it's a lot faster maybe we just have a difference between freehand and whatever

Ja, geht so! Ach was, sieht echt gut aus 👍🏽

Nice work! Make some throat inserts for your bandsaw with just a kerf cut. Use brass, aluminum, plastic.. Will keep small chunks from trying to jam and just might save a finger one day.

Schööönes Ding! Gefällt mir sehr! 😃🤙🏻

Habu never fails to impress me!

Really beautiful work, Hassan! It looks incredible! 😃 Stay safe there with your family! 🖖😊

You do very interesting projects. I stopped at 2 random videos tonight that caught my eye and they were both your's. I subscribed. Being creative is just plain fun. Kudos.

Beautiful pipe, my only detail would be drill first shape later cos any accidents with the drill could ruin it but other than that nice work

wunderschön geworden. Danke fürs Zeigen Gruß Sascha

Très jolie pipe ! Bravo !

nice. Always good to have a bowl you can set down.

Holy Crap, after watching this, I definitely don’t think smoking is bad for you anymore. The way you were using that band saw made me realise, we are more likely to get destroyed by machines we use daily, then by sucking back some pipe tobacco at he end of the day. 😮😮😮

Very nice block of briar to start with😊 Nice video I enjoyed watching...I am also a beginner pipemaker

Great film. Rad pipe. Mahalo for sharing! 🙂🐒🤙

Very classy! It needs a velvet lined box to live in.

Looks great and you did a fabulous job making it!! Enjoyed your video and I gave it a Thumbs Up for the support of your channel

What a pleasure to watch! Very nice work

Wow, I love this. My question is: where do you buy the acrylic for the stems?

Your's turned out a lot cleaner than mine. 😅 that's a beauty Habu. Well done. 🙌💚

Hi Habu good job beautifully done friend

Fürs erste mal echt gut. Hab mir gestern auch alles bestellt was ich so für meine eigene pfeife brauche zum bauen. Jedoch starte ich klein an mit einem Pfeifen Rohling ^^

Very nice job brother , make some more 👏

Beautiful, an art work!

That's beautiful

So, this summer camping will be next to a lake, or the sea, i see Captain Habu sailing and smoking already! 🧔🏻😄

when I make one freehand, I tend to use a branch that has a branch coming out of it, and I saw it to size. this is because its got the rough shape needed for a pipe and works perfectly imo

Здорово!,талантливый человек, талантлив во всем, ему хоть курительную трубку сделать, хоть легкий танк, очередная красивая работа.

Excellent work, dude.

Ey richtig schön geworden

Great job, HABU! 👍

wow sowas schön geworden. geniesse jeden zug 🍀

May I offer a suggestion? I don't mean to be condescending at all. I'm certainly not a pipe expert either. The form is quite simple and well established. The most exotic materials have been done. Pipes that look like photo realistic sculpture have been done. You know what has not gotten adequate creativity? The way they sit when not in use. I've seen several fancy pipes that came with a matching stand and I'm aware of stands for collections of a dozen pipes. But I cannot think of many examples where somebody took the angle and stance into account when designing the bottom of the pipe. Everybody reverts to the classy method of holding it. Just off the top of my head, having a vague sense of your style, I could imagine a set of brass knuckles that flows into the base of the pipe in a aqua linear manner. With a little focus on filing the far end of the brass knuckles, the weight would allow you to design the pipe at any angle or attitude. You can go even further in this direction; why should pipes always be held in the same manner? It's not particularly ergonomic. A clever enough design could potentially be marketable not only to the tobacco connoisseurs, but the quickly growing legal cannabis market. If you take a look around some of the websites of high-end dispensaries, it seems clear that the market for high-end smoking devices it's quite a bit larger than the pipe smoking crowd. You might want to keep this in mind. There are many inexpensive easily modifiable products that allow you to control the temperature down to the degree, allowing the same device to function as a vaporizer or a traditional pipe. Personally, I would love to see water integration. Particularly a design that would allow you to put it in your pocket without the water spilling. There are many variants on this available already, nobody makes one that is not plastic and at the $20 mark. I don't know how accurate of a view one gets of the market from Europe, but every corner in urban America sells bongs and pipes, even the smallest of stores usually have one or two items over $500. And they sell with regularity. I have no idea about the legality so you might want to do your own research, but I wanted to offer my two cents. I've always enjoyed your work, but I think a lot of the interest in camping and off grid life is starting to wane

Great looking pipe.

Hasil kerja tangan yang sangat mengesankan 🎉🎉🎉🎉🎉 Mari kita menikmatinya sambil minum secangkir kopi hitam ☕

Helk ya! Nice!

Beautifull Pipe👌

Great job…..talented guy

Your first try and my first try came out a bit different 😂, it was my first carving project at all tho so im not jealous

That is a first attempt? I think you made a work of art.

You gotta change the "not to bad" for an "almost perfect" bro, it looks awesome, good job

Beautiful. Very nice, how does it smoke? I woul love to do work like this but I lack the tools/workshop. I spent my time/money/space on other projects, like gun collecting, war games and scale models. I have about a dozen pipes but wife won't let me smoke them anymore since I started getting heart problems. Still have tobacco too. 😢

It’s none of my business but that’s the scariest way to use a lathe 🤣. Pipe looks great!

Extraordinária a peça!!!

Wooww voll schön 😍

Maa Syaa Allah So beautyfull

I want one. 😮

Was soll man sagen? Einfach top,Klasse,super!

Very Well done !

And for tour next video- a forged pipe tool, for packing the tobacco and cleaning it.

Lindo trabalho parabéns.

Amazing

Schönes Projekt. Gleich Mal wieder die eigene raus holen

Nice end product but there are a few things wrong here. 1. For the bowl you need to use a core box router bit 2. Don’t put epoxy on pipes it’s toxic.

Not too bad at all!

Super schone Pfeife!!

Thanks for the content man. its awsome

Beautiful job ✌️

NICE JOB sir!!!😲😲😲

Amazing 👍

What about the inside of the pipe? Do i need to put varnish or oil or something inside?

Vory tattoos,Black rose, Fingers rank known. Nice pipe

SUPER 👍👍👍 SUPER

Wirklich gut geworden Dein „erster Versuch“ - sieht auf jeden Fall sehr beeindruckend aus. Was hast Du für ein Material für das Mundstück verwendet? Grundsätzlich brauchst Du Dich mit diesem Projekt nicht zu verstecken. Glückwunsch.

Nice looking pipe.

Schönes teil!Top Arbeit mein Lieber !Gruß #BulatSchmiede 😊🤙

Looks good. I think Sherlock Holmes would definitely give it a try

As an amateur pipe maker, I'm wondering, with that wood (which I don't recognise), and considering it has an odd reddish colour, does it not give it's own taste when heated by the tobacco embers? And especially with the wood stain, that can often give off slight fumes you don't want to be inhaling.

Best produk sir

We're do I get the plastic blank. I like the one you used in this video.

Безумно !красиво!!!приятно наблюдать за работай))

Good job!

Beautiful work Hassan, beautiful. What type of wood did you use? Darlington, South Carolina USA

Lovely Pipe. Would love to take it Up in My Old Age. I'd like to Check out All Those different Flavoured Tobaccos, with the different Pipe Wood. Read some Poetry Online Maybe. I'd Like a Van Cleef Style Drooper. Solid Silver Collar.

Having a machine shop at home is a great advantage.

Good

Mount a compressor with the nozzle pointed at the plate to blow the woodchips away,operated with a footpedal. Stay safe

Nice

Sehr schick, welches Matrerial nimmst du für das Mundstück?

Habu: I'm going to just casually throw together something that's would sell as fine art. Here you go.

Sehr gut

Nice work but that's a lot of electric tools to be considered free-handed

Look great , have u try it

Dude, ur amazing......is there anything u can't do?

Popeye the sailor wants his pipe back! 😂👍😘

สวยมากครับ

All you need now is a deerstalker hat and you'll be set to solve some mysteries.