Building a Loaded 5.3L LS - Engine Power S7, E11

Подписаться 1,6 млн

Просмотров 1,4 млн

50% 1

NEW 2020 episode! Our 5.3L street machine powerplant gets updated with sequential EFI and more.
Enter to win the 5.3L LS Engine here: pntv.us/lnk_013...
*Sweepstakes ends 7/13/20*
Check out the PowerNation store for shirts, hats, and more: pntv.us/lnk_f8a...
Want to watch POWERNATION completely ad-free? Subscribe at the link below and receive the first month for just 99 cents:
pntv.us/lnk_3d0...
Follow POWERNATION Everywhere:
www.powernation...
/ powernationtv
/ powernationtv
PARTS USED IN THIS EPISODE:
ARP: Bolts and Fasteners
More Info: pntv.us/pn_pt_1...
Continental Tire: Continental Extreme Contact
More Info: pntv.us/pn_pt_1...
E3 Spark Plugs: E3 Spark Plugs
More Info: pntv.us/pn_pt_1...
Holley: Holley EFI Throttle Body
More Info: pntv.us/pn_pt_1...
Holley: Holley Terminator X wiring harness and ECU for LS Engines
More Info: pntv.us/pn_pt_1...
Holley: MSD Atomic Airforce Intake
More Info: pntv.us/pn_pt_1...
MSD Ignition: MSD Atomic Fuel Rail
More Info: pntv.us/pn_pt_1...
MSD Ignition: MSD Spark Plug Wires
More Info: pntv.us/pn_pt_1...
Permatex: Permatex Orange Thread Locker
More Info: pntv.us/pn_pt_1...
Trick Flow Specialties: Trick Flow Gen X 205 Heads
More Info: pntv.us/pn_pt_1...
Trick Flow Specialties: Trick Flow Track Max Hydraulic Roller Cam for LS Engines
More Info: pntv.us/pn_pt_1...
Supplied by Summit: Harland Sharp Aluminum Roller Rockers
More Info: pntv.us/pn_pt_1...
Supplied by Summit: Summit Racing Billet Timing Set
More Info: pntv.us/pn_pt_1...
Supplied by Summit: Summit Racing Harmonic Balancer for LS
More Info: pntv.us/pn_pt_1...
Supplied by Summit: Trick Flow Cam and Cylinder Heads
More Info: pntv.us/pn_pt_1...
Matco Tools: MATCO Tools are the Official Tool Supplier to PowerNation
MR SPEED COATINGS
The Industrial Depot: Tools, Hardware, Shop Supplies

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 891

@wunkskorks2623 4 года назад

I love how giddy Pat always gets when they’re working the dyno. Dude’s lovin life.

@TheBb6prelude 4 года назад

Mans living his purpose.

@strongjohnful 3 года назад

Pat Fenis a lot happens behind the scenes though. Can’t assume its the same way as they show on cam. Not to mention they have a nice setup to start with.

@chaoszombie9995 3 года назад

thats the most exciting part about building an engine! i dont blame him

@illestk24civic 3 года назад

The man is single

@adamantium1983 3 года назад

@@illestk24civic he is married to a drag racing column writer

@Rgmekanic 4 года назад

My father and I picked out a Z71 Silverado brand new in 1999. He and I worked for 10+ years side by side in that truck every day, every family vacation was taken in it, and tons of awesome adventures. My father passed away, but I still drive it every day to and from work. Several things I refuse to change on it just because it reminds me of him. Nearly 21 years and almost 300k miles have been done with either my dad or myself at the wheel. A new engine will be in it's future, as I will never live a day without that truck in my life. This engine would be awesome to make sure it keeps going for many more years.

@AviewFromUnder 3 года назад

James loves power coating so much he decided to powder coat his lungs as well!

@cristiancalderon7669 2 года назад

🤣🤣🤣🤣

@jacobgreer4833 2 года назад

I was hoping someone caught that too ha

@skellydehbout2000 2 года назад

Lol

@cherokeebareful 3 года назад

“We spend some time in the cell!” “Here I come!” “I’m ready!” 😂😂

@drsnooz8112 3 года назад

Of all the builds you have done, this is probably my favorite. A clean, quality build. Great component choices at every step. Every car should have an engine this good.

@marknowakowski6590 Год назад

Tell her about all the Chinese working 24/7 and no time to raise there children and then be discarded there after so there communistic gov can hurry up and slave the next generation.

@SD70ACE- 4 года назад

I could use this engine for sure, my 12 year old daughter ask me how can China build a hospital in a few days and its taking me a decade and counting to build a car, 😥.

@02honeydew 4 года назад

Damn got em

@Ecosse57 4 года назад

teach her about the evils of communism and slave labor.

@bobk3840 4 года назад

Tell her it isn’t a real hospital

@nathanbutler8240 4 года назад

@Pedro Ruiz slavery gets shit done i mean look at the pyramids

@indyrock8148 4 года назад

@toreythomas1 lol not surprised 😆

@tomsimi6538 4 года назад

Truck engine! My 1990 GMC, 4x4 is clean. I'm the original owner. I take care frequent maintenance. It's a 5.7 350, (stock) with 302K miles. I've learned a lot. Thanks.

@catchulater7483 4 года назад

I would be honored to have such a power plant in my sons 86 IROC. I have enjoyed and used the info you bestow. Been watching Pat for years. Big fan. The engine would be super nice to have. But the real treat is watching Pat over the years.

@hellyeah2299 4 года назад

I saw a roll of paper towels in the shop. Did you guys just forget to tell us how great they are and where we can buy them?

@johnnytyler5685 3 года назад

How do you think shows like this stay on the air? That advertising money is their main source of income.

@nunya7012 4 года назад

This is the perfect motor for my 1978 Jeep Cherokee Chief. Great build.

@jayyoutube8790 4 года назад

Shit.. I’ve been watching you guys since you were on. I remember when the first car repair show “shade tree mechanic” back in the 90’s. They just did repair back then. Shows about this subject is what it’s grown into.

@trentdawg2832 4 года назад

I used to love shade tree mechanic...Sam memolo and I forgot the other dudes name...

@eileenheitman4351 3 года назад

Dave Bowman

@coltonanderson745 4 года назад

This show is the bees knees I'm about to turbo my vortec and alot of the tips and tricks help n go a long way

@bri-manhunter2654 4 года назад

Checkout Richard Holden on RU-vid!!!

@youcanbesmartaskhow3857 4 года назад

@@bri-manhunter2654 I second this....hes the guru.

@jimparker7778 4 года назад

Great show for your Chevy fans. Gotta love those LS engines

@timeless6964 3 года назад

Engine Looks Great!!....And Sounds Better, Strong!!!

@smm2k13 4 года назад

I would drop this into my 2002 Trans Am!

@phredflypogger4425 3 года назад

I've watched many of your videos, all well produced, informative and comprehensive. Well done guys. From Australia.

@rickmorse86 4 года назад

This really needs to go into my shop truck 70 Chevy Short bed C-10. Mine has 3 dead cylinders from the cam going flat. I have been scared to try the LS I'm after all a carb guy and wiring isn't my thing. You made this look easy. Win or no this is still a great show.......I'm 53 and have been a fan forever. Keep up the good work.

@ryandrumsfly 4 года назад

My 01 Tacoma wouldn’t know what to do with that in it! Already started the swap🙏🏻💪🏼

@noahkloeck5870 4 года назад

That would be a pretty dope swap tbh

@sofakingrandomjr 4 года назад

@danielvillarreal8892 4 года назад

As a retired senior citizen on a fixed income I can't afford to buy an engine and fix it up. This would help on my next project that will probably go to me 19 year old grandson.

@graham1193 4 года назад

Worth a shot. 275000 miles on my current 5.3. (99 Silverado Z71 1500)

@alanpreston9034 2 года назад

Hi I've had 3 5.3 Chevy trucks I've worked them hard and they come through . I bought a 69 Corvette convertible for retirement my plan has been to put a 5.3 in the vette to make it cruise and have enough power and be efficient on fuel thank you Alan

@ryansellevold4445 4 года назад

This engine is perfect for a 1965 Chevy stepside pickup

@connorschill9469 4 года назад

I'd love to swap this for the factory 5.3 LM7 in my 03 Sierra, my first vehicle. It's been through so much memories and experiences

@ohshitwatsmyname 4 года назад

Dibs on that old 5.3

@bri-manhunter2654 4 года назад

Honestly, all you need to do is a cam, intake manifold, and long tubes will give you a lot of fun.

@youcanbesmartaskhow3857 4 года назад

@@bri-manhunter2654 do these mods and a mild street good gas tune....you will NOT BE DISAPPOINTED!!! Same reliability!

@magicalselena 4 года назад

Just enter the Giveaway. My 88 iron could really benefit from the 5.3l It has set for 10 years with 7,633 org miles. Since I had spine surgery and unable to work on it right now. Love watching power nation.

@BobbyOfEarth 3 года назад

I applaud Pat for showing his mettle, in using the 598 BBF Kaase engine in this segment. Its the same BBF that out paced Pats 632 BBC on the Dyno, to Pats dismay. Both are total beasts and I'd take either one.

@otsenres1636 4 года назад

This engine would be perfect for my family owned 1973 Camaro, it has a restomod look.

@ogland6482 3 года назад

This is probably more than a grand in bolts, holy cow.

@nathanbutler8240 4 года назад

I need this to get my 71 c10 running all it needs is the engine

@squirtlejim8727 3 года назад

get a big block chevy for the c10, you dont want a 5.3 in it

@Z-Bart 4 года назад

Make sure Pat doesn't drop a pen in MY engine. 😁👍

@skipjohnson9358 4 года назад

🤣🤣🤣

@leoarc1061 4 года назад

@Ed Only if it is an ARP pen!

@mikestoms4015 4 года назад

I see a lot of comments about this, did he actually do that on an engine?

@MrTimstaaa 3 года назад

Love the way this engine looks. Finish is top notch.

@cmh2111 4 года назад

Nice build, however I prefer simple. 1976 Nova SS, LT1 (1970) Holley 750 double feed, double pump, Edelbrock intake, Hooker Headers, TH400, 12 bolt (4:10). I can work on it in my garage, don't need a qazillion $$ in tools. The only "HI TECH" thing I own is a timing light. I have owned this car for 40 years, and it's been a rock solid build. Scared a few passengers as well. : )

@pwn3426 3 года назад

cool and all but thats like a 4-5k dollar package for 450 hp rofl

@hacxer8424 2 года назад

This would be the best job ever you get to build engines and hear them run so cool

@cacarotogod6695 4 года назад

I've been your fan my whole life.. I'm 31 now

@SavageBunny1 4 года назад

Yeah back in high school on spike TV!

@charliejeffries9478 4 года назад

I remember when they was on spike to!!!!

@bilbobaggins4710 4 года назад

Hole life

@codycall6513 4 года назад

Every Sunday was waited for

@colinkulukhon-lincoln959 4 года назад

I used to get up at like 6am on sundays to watch spike tv. I live in Alaska so my view times is a bit early lol

@brentacusmaximus6677 3 года назад

Waiting to see you guy's set the crank to cam timing on one of these builds.

@Panelman-wx8fo 4 года назад

That would be so sweet in my 55.5 Chevy Panel Truck, or my 2000 Chevy Silverado, or my Daily Driver 2011 Silverado, or maybe the S10. So many choices.

@kevinliles9870 2 года назад

Love this show. Trucks, power nation, all of the sunday morning car shows are great. Also a 5.3 owner

@BeeDogg1000 2 года назад

Great knowledge about using older engines 👍🏽👍🏽👍🏽👍🏽👍🏽

@lilsargeokiedope2032 2 года назад

This engine is absolutely amazing, i doing my first build and it’s no where near this pretty. I would have loved to win this motor.

@randyrobertson8729 4 года назад

Would love to drop this into my 72 C10 shorty.....wicked job guys

@shadowopsairman1583 3 года назад

Take a LR4 4.8L and hop it up on the Vortec heads, roller rockers, springs, machined porting with a 6.0 stock cam, HV&HP oil pump, clevite bearings on mains, cam, connecting rods, no boring or stroking

@johnnylightning476 4 года назад

This would go nicely in my 72 Monte Carlo. I daily drive the old girl so the chance for some extra power and reliability cannot be missed even if the odds are low. Can’t hurt to try. Good luck to everyone!!

@terryharms235 2 года назад

sold I am going to copy this for my 1995 suburbin love the motor I have two of them to pick on thank you so much for sharing Terry

@captainsledge7554 11 месяцев назад

Im actually so thankful for the LS lifter trays. Ive made a lot of money doing 2 or 3 hour cam swaps for customers and friends over the years. I think the Hardest was a 4th gen camaro. Only because half the engine is under the firewall. The c5 and c6 corvettes were easier than the 4th gen camaros. Actually the worst was the LS4 in the pontiac grand prix. Only ever did one of those.

@dioad1739 4 года назад

Perfect for my 99 black Z-71 Silverado you guys are awesome.

@georgehazel3876 2 года назад

Ive got a tuned 5.3 in my 2000 silverado pushing almost 400 horses I love it gonna add a few more add ons one day 😉

@jordanbabcock9349 Год назад

Word of the day: Clean

@ccsupra1997 3 года назад

Wow this engine is awesome. We have a 1992 BMW e36 that we would like to put it in.

@MidnightCustoms111 4 года назад

would sure be nice with a 4l80e in my 05 mustang. Im already planning to build the same stock 5.3 nitrous yall did but on boost

@jamestehuna5915 3 года назад

I think I just found my new favourite channel

@shawnglynn6569 Год назад

Definitely 💯 percent perfectly done by these gentlemen who i would be flattered to own their engine

@charlesstull4582 4 года назад

I'm not a ls fan but what ever they build will run flawless. Who gets this will be a lucky guy

@AfflictionSuzukiGsxrLosAngeles 4 года назад

One is these engines in my 13year old Gmc 1500 (2008) would be super cool.

@Orygunner67 2 года назад

When Pat starts pushing that throttle lever forward on the dyno he has this look like my dad when he comes home and finds out his boys have been little turds and is starting to take his belt off for you know what! And yes, he means business! When Mom said just wait till your father gets home she meant it! 🤣

@robertward2286 4 года назад

My favorite RU-vid channel always great film and commentary and all that HP thanks

@indyrock8148 4 года назад

What's happened to old gravel throat? He finally died of throat cancer? I'm talking about the voice over guy.

@RegulerShowTV 4 года назад

My 86 foxbody has that motors name written all over it, awesome build !

@philauten2783 3 года назад

You too, Jim Bob? More heretics here than you can shake a stick at! Phil in TX

@RegulerShowTV 3 года назад

Phil Auten yeahhh it’s pretty bad, but ford doesn’t have any strong and basically built old motors you can pull from wrecking yards and throw boost at without much trouble, that and the ls is just so simple and easy to swap into anything and make great power, and if it grenades there’s plenty more to pick for another $270. No brand loyalty, I’m just a hot rodder I guess.

@izzcarrasco 3 года назад

Why don't these guys ever do a parts and cost list to see what it will take. I want.to have my 5.3 vort2c engine on my tahoe done

@jeffheld3971 4 года назад

I know you guys need to pay bills but I did not expect a 30 plus minute marathon commercial for hawking parts. Geez.

@pmrparts 2 года назад

That engine would work great in my 1961 Jeep CJ5.

@ryanroberts1104 3 года назад

You can tell it just kills Pat to say "murdered out"...LOL

@dirtcop11 4 года назад

When I was starting to work on my own car back in the 1960s, my first few cars were made in the 1950s. They were simple and you didn't need specialized tools. Gas was cheap and so were the cars. I didn't pay more than $100 for a car until I was 18. I didn't know a lot about auto mechanics back then, Now cars are computerized and sensitive, and they cost a lot more, even for the 'beaters'. They aren't as much fun to tinker with.

@quik5ltr 4 года назад

Oh look, they actually did something without a carburetor

@mmarshal7633 3 года назад

this is my first time watching your videos and I enjoyed every moment of it seeing how you guys are putting these engines together I have had quite a few Tahoes over the years ranging from a 99 to a 2004 Chevy Tahoe and now I have my first truck what is a 2005 Chevy Avalanche I would love to take that engine and drop it off into my truck I just wished I had the money if my wife was still here with me it wouldn't be a problem she had Ms in cancer and I am a cancer survivor as well after watching this show you guys are giving me to wishes fixing up my truck and racing a Dodge or a Ford 🤔😄 Lol hahaha

@ShowMeAr15 4 года назад

I am building a 1972 C10 right not in honor of my father who just passed this would be a God send!

@Rmac335 3 года назад

I want to put that thing in my grandfather’s ‘56 Plymouth that he never got to build.

@kokomodave 4 года назад

Perfect for my '12 Silverado!

@trentdawg2832 4 года назад

It's a gen 3....won't work unless you get a 58x to 24x converter box...

@iraj9884 4 года назад

I don’t even know what car I would throw this in. I think it would fit GREAT in my 58 Chevy 3100 🤘🏾

@alexramsey7244 2 года назад

My 1985 Chevy pickup would love having this LS engine .

@KAS_Motorsports 20 дней назад

That would be cool for my 2003 CTS. The new gen Camaros are based on that chassis.

@austinphelpshd3169 4 года назад

I would love nothing more to win this engine right now. Ive been looking at ls engines and for what i want and the parts is way out of my budget. This engine has basically almost everything that i would need for my boosted/nitrous application in my 1979 Chevy C10 Step Side project or swap it into my daily driver 2010 V6 3.6L LT Camaro and let it be naturally aspirated. My favorite video is seeing the small block take all that nitrous. :)

@oceanhome2023 3 года назад

“Murdered Out” LOL a new phrase enters our language , just cover everything with black rattle can paint !

@williamschimberg8258 4 года назад

My grandma has a 1950 chevy impala that she loves. I got that engine I would put that engine in her car to make it a fun daily driver for her

@xFullyTorqued1x 4 года назад

Would be perfect for my burnout S-10 build. I already have a trans and supercharger, just looking for the right SBC...

@nicktralongo1583 4 года назад

this is the best youtube channel out there

@charliemclaughlin1042 4 года назад

Yea I'll use that in my Silverado for along time 👍👍👍👍👍

@Msarlan21 4 года назад

Going through a divorce. first thing i do? Finally start that project thats been vetoed for 14 years. Help a brother out!! I already am shopping for a transmission. 200k on tie power train. Slips every once in awhile.Bring this 2006 sierra crew cab to life! It's gonna be a bad little sleeper. Love the channel and the knowledge. Hoping for that... i finally won something moment! Keep up the great work!

@OuchesVonDoom 4 года назад

Lot's of freedom right there!!!

@DJLuDog3 4 года назад

I made me a ford guy but great engine regardless. Love arp products myself. Ive sadly learned with watching and learning from these guys that unless you got something 1974 or older in my state any engine changing is illegal. So much for usa being land of free.

@EricJh21690 2 года назад

What state do you live in where that's the case?

@endogenetics5535 4 года назад

I need that I just bought a 72 monte carlo it would be perfect exactly what I'm lookin for

@dioad1739 4 года назад

I had a cherry 72 Monte Carlo black on black big block my X wife totaled it I still cry when I think of her not the X the car.

@endogenetics5535 4 года назад

@@dioad1739ah man that sorry to hear that! I plan on giving it to my son as a graduation present hes young so it will give a lot of years to play with it and have some fun lol

@blackericdenice 4 года назад

10:38 how many people have had valve covers to just crack from making hp. Once again Lying Pat is creating a problem that doesn’t exist to sell something you don’t need. Why not powder coat your stock valve covers?

@connorjohnson9230 4 года назад

Right? This joker recommends cast aluminum valve covers for “strength” but doesn’t have a problem with the polymer intake manifold (which is also fine)? If it ain’t broke don’t fix it...

@hawkdsl 4 года назад

Advertisers pay for all this stuff. Not a biggie. Most people can recognize.

@rorschacht8478 4 года назад

Pat is reading from a script that the writers made because the producers will plug anyone willing to pay, also the sponsors require certain things to be said. So, not pat's fault, he's just reading his script.

@robertpolkamp 4 года назад

E3 spark plugs... really?

@JM-yx1lm 3 года назад

@@robertpolkamp e3 plugs, in my opinion are junk. I have at least 4 of them fail. Never have i had a NGK fail when new.

@jonycard1 4 года назад

Should've fed her some more timing these engine's love it!

@robertmacpeek424 4 года назад

Mike shimmed the pump (.00.15" which is probably the most common spec, even though I was also taught to shim the LS crank driven pumps despite the fact that the service manuals don't mention anything about shimming them...) but he didn't align the front & rear covers to the oil pan...

@1stzjtruck706 4 года назад

I’d love to put this in my wife’s 2001 Silverado and I’d love the Jeep 4.0L you guys build for my ZJ

@Truckerdaddy 3 года назад

I've got a 92 S-10 that this would go good in. Only had 120k miles on it when wrecked it in 07. Still sitting in storage waiting to get fixed.

@jordansande9929 2 года назад

Using clean gloves would help with oils or unwanted substances on any surfaces. Our hands do have oils seep out. That being said, the hands in this video all seem to be quite clean. Keep up the good work guys.

@camaromike82 4 года назад

Would be a perfect engine to go in my 1982 Camaro that I'm planning to swap next year. Too bad the contest isn't open to Canadian viewers......

@thought1212 4 года назад

ya, sucks for us.

@braydenrivard1489 4 года назад

Why I isnt it for Canadien viewers. This would be a great engine for my 79 Chevy

@dpond2559 4 года назад

my dads old drag car was an 82 camaro

@MikeY-nh2we 4 года назад

You already have health care 😁

@williamjackson982 4 года назад

They will make sure that a millionaire will win the motor.

@johnsmith-qz4bv 4 года назад

very nice guys ......great work love those LS engines

@clintjohnson695 2 года назад

My 2001 truck needs that 5. 3.

@TexasTim45 Год назад

I thought the anti seize goes under the head of the bolt to the washer. Not under the washer to the head?

@davidadams5922 4 года назад

I gotta 00 nissan desert runner that could use that engine ..I’m a ford guy at heart but can’t hate on the ls at all !!

@richardcoleman9645 4 года назад

I would take this setup and put it right into my 06 Silverado. Would love it just the way it is.

@CJColvin 4 года назад

This engine would be a great swap for an old Chevy C10 or even an old school 69 Camaro.

@benjaminkent4397 4 года назад

I did an ls 5.3 swap with a 4L60E on my 65 c10 step side. It was fairly simple to modify the engine bay and I also added power steering. I do have to say my engine did not have nearly the upgrades these guys went with. It does ARP hardware but I went with afr heads and a used corvette aluminum intake. Horsepower numbers were just under 400 and for a driver that's just fine for me.

@CJColvin 4 года назад

@@benjaminkent4397 Sounds awesome brother. Imagine if you ported and polished those AFR heads and boy that 5.3L LS V8 will probably make well over 450 HP.

@benjaminkent4397 4 года назад

@@CJColvin that project has been put on the back burner as i have lost interest in it. Still needs a lot more to be complete. I've been working on my 72 Plymouth A body getting it ready for the track.

@hawkdsl 4 года назад

I'd LS swap a toaster if it would work.

@jennxoxo409 3 года назад

Nice job on that motor

@Mr.ap_345 3 года назад

Wow this engine crazy

@gasfiltered 4 года назад

For all the thirsty commenters out there, this show was on TV over 10 years ago. That engine was blown up long ago, you can’t win it without a time machine

@brian1157 4 года назад

This would be perfect for my 93' GMC C1500! I just went and bought a bunch of interior parts and body panels from a parts truck today! Currently running the stock 4.3, so this would be wild!

@DGZMusic Год назад

“Deep pockets are a must”

@josephclay1341 Год назад

I 'm building a 84 elcamino for a daily driver my friends say I don't need a fast street machine but at 76 I'm not going to change how I am looking forward to giving them a ride looks like about what I want power it 😊