Building a massive 164TB Home Server with 12HDD’s | maximizing my Storj Earnings & much more!

Подписаться 1 тыс.

Просмотров 15 тыс.

50% 1

Today I set up a massive 164TB home server using the robust Inter-Tech IPC 3U-30255 case. This build features 7 SAS drives and 5 SATA drives, tailored for optimal performance and reliability. I'll be using part of the server to host a storj node - and a few of the drives for personal projects. Whether you're into data hoarding, need extensive storage solutions, or are curious about Storj, this video is for you!
Link to Hivemapper with 10% off!
shop.hivemapper.com/discount/...
List of parts for my earlier server:
Motherboard: amzn.to/3K1gSUh
CPU: amzn.to/3lH65Fx
RAM: amzn.to/3JF1Cel
Case: not on Amazon.
2TB HDD: amzn.to/3JKSxRv
Energy monitor:
amzn.to/3QarcJD
UptimeRobot: uptimerobot.com/?rid=90781042...
Parts for my Helium miners:
List of parts:
4G Router:
amzn.to/3THyN5d
Zip ties:
amzn.to/3RiObDv
Cheap 4G router:
amzn.to/3RE1j5N
Tp link 4G to Ethernet:
amzn.to/3TGLRI7
Mast Clamb:
amzn.to/3cImWU3
Power Strip:
amzn.to/3CWHLWd
Waterproof box:
amzn.to/3CWHLWd
Small Heatsinks:
amzn.to/3AUpF4S
Waterproof cable guide:
amzn.to/3KKx6Qm
Silica Gel packs
amzn.to/3eq6tUE
Energy monitor:
amzn.to/3QarcJD

Наука

Опубликовано:

23 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 97

@JeffGeerling Месяц назад

Cable management: "It's not good, but it's a bit!" - heh, at least you made an attempt, and there's visible motherboard down below! Better than most of my builds :D

@hgsoftware5129 Месяц назад

Omg!! No way you just commented on a video of mine!! Im such a fan Dude! Especially the 1PB pi build! You just made my day! No, my week!! Thanks Jeff🥹😀🫣😅

@jfkastner Месяц назад

Interesting Build, looking forward to some Performance test results! Thanks!

@hgsoftware5129 Месяц назад

Thanks alot! If you enjoy the content then consider a sub😃

@BigMack1515 7 дней назад

Nice work!

@hgsoftware5129 7 дней назад

Thank you! And Thanks for watching!

@EastAngliaUK 2 месяца назад

surprised how quite it is

@hgsoftware5129 2 месяца назад

Yea Its not Too bad, but Keep in mind the disks Where not doing much work ;)

@BrunodeSouzaLino 2 месяца назад

SATA is a subset of SAS and SAS has a SATA compatibility mode built into it as well. You could set your whole structure for SAS and use SATA where necessary and it would work just fine.

@hgsoftware5129 2 месяца назад

Thanks alot! Then i did not need an additional adapter ;)

@krv1232008 2 месяца назад

Finally❤❤❤

@hgsoftware5129 2 месяца назад

Thanks for watching 😃

@ErikS- Месяц назад

2:57 - These "HP" drives look like HGST Helioseal Ultrastar drives (owned by Western Digital, whose name is also on the lower part of the label). This is also confirmed by the model number of e.g. the left drive (WUH721818...), which is completelty fitting the HGST Helioseal drives, except for the first letter, which is W instead of H. U = Ultrastar, H = Helioseal, 72 = 7200 rpm. 18 = raw capacity, 18 = available capacity... I personally am a big fan of these drives. They are very reliable and by many datacenters used.

@hgsoftware5129 Месяц назад

Hey Thanks alot! That makes sense. Yea the drives was bought from a very high end local Company that uses the disks for windmills, they hard these they did not need so i Got to buy then cheap

@TheTrulyInsane 2 месяца назад

SATA drives are compatible with SAS connections, you can't use SAS on SATA plugs, but you can use SATA on SAS.

@hgsoftware5129 2 месяца назад

Thanks man, might not need the spare connector then ;)

@nicktayloriv310 Месяц назад

If you ever redo or refresh this one you can look at Mobo's that can use ECC memory, AsRock boards usually do.

@hgsoftware5129 Месяц назад

Yes! Not a bad addition in the future

@DJLKM1 2 месяца назад

Nice build, think i would have maybe gone with a slightly bigger psu, 500w for all those drives is going to strain the 12v rail a bit. Btw sas cables can be used on sata drives.

@hgsoftware5129 2 месяца назад

Hey man! Thanks so much for the tips! 👍🏻 i Think 550Watt is OK for this amount of drives. Lets hope. Also Wow! Did not know about the sas to sata thing. Maybe i did not need that adapter after all!💪🏼

@mindshelfpro 2 месяца назад

SATA drives work with SAS adapters... just get the cable to fit. Note the reverse (SAS drives on SATA ports) don't work

@hgsoftware5129 2 месяца назад

Thanks alot, then i dont need the spare adapter

@music3479 2 месяца назад

Hi, I started off like you, using a single SAS to 4 SATA cables. But ever since I found this adaptor on the chinese taobao site, it was a superb option. Basically, this link im sharing with u is a 12 hdd cage that has a backplane (SAS/SATA), and the backplane, u can simply use a single miniSAS cable to SFF 8047 to ur LSI adaptor. And boom! 1 cable to 12 HDD which reduces the cable mess. There is also a 6 pin port, the seller will provide u with a 4x molex to a single 6 pin port to power all 12 hard drives. I have been using it for months and works like a charm. Will share the link with u if i can

@music3479 2 месяца назад

Hahaha im not affiliated with the seller. Just sharing with you. I have about 20+ hard drives, running a 250TiB worth of Chia plots. Really lucky to have found this solution and dm sharing with you

@hgsoftware5129 2 месяца назад

Hi man, Thanks for the reccomendation - but i currently do not need any more drive space :) you are welcome to dm me tho

@music3479 2 месяца назад

@@hgsoftware5129 Hahhaha no problem!

@ZyFinity Месяц назад

is storj still profitable compared to chia? how much is 1tb expected to make monthly? i have about 300tb on chia atm and could consider switching

@hgsoftware5129 Месяц назад

Hey man, you might take just one disk and convert to STORJ, but do not convert all at once. Because it takes a very long time to fill up your disks with STORJ, you only get data when there is data on the network. You make about 1,5 usd pr. Tb that is actually filled up

@shephusted2714 2 месяца назад

using some of the second nvme as a cache would really help

@hgsoftware5129 2 месяца назад

Yea agreed, i might end up doing that

@jackipiegg 2 месяца назад

14:11 I'm curious. Are you running all of them without redundancy/backups? If yes, what's your thought process on that.

@hgsoftware5129 2 месяца назад

Yes i am! 👍🏻 none of the data is essential enough to need backups - so that is the decision i went with

@jackipiegg 2 месяца назад

@@hgsoftware5129 Damn I wish I had your confidence. TBH that's the main headache i had to think of. Seeing 1/3 of your storage blocked out by redundancy SUCKS.

@hgsoftware5129 2 месяца назад

Haha i understand the feeling ;)

@hw2508 Месяц назад

@@jackipieggWrong view. You need to invest 3GB to get 2GB of reliable storage. You don't buy drives to store data but to be able to access data when you need it.

@jackipiegg Месяц назад

@@hw2508 With your logic 120TB raw will only get you 80TB. What a waste 40TB.

@ErikS- Месяц назад

I can confirm that the SOC of these LSI RAID controllers tend to get really hot. Why they dont put a small fan on them is beyond me. Even with the good airflow in a server case, I still prefer a small fan on them.

@hgsoftware5129 Месяц назад

Agreed. I added a Small fan the hopefully helps

@nathanbyel9086 Месяц назад

Good setup. But, how much time needed to fill up 164TB with storj? I think, possibly never. There is was a huge data deletion at the last month. My node with 12TB space running 22 month and it's filled only at the 8TB for now. I have good internet connection and online up to 99%, good disk speed, but ingress is to low and periodical deletions is too big. Maybe I'm doing something wrong. Or node location is no good.

@hgsoftware5129 16 дней назад

Hey nathan! Not all disks Will be used for STORJ. Also they are now talking about alot of new data Coming soon.

@nathanbyel9086 16 дней назад

@@hgsoftware5129 I've seen a significant increase in incoming traffic on my nodes over the past week. About 2TB is coming in each day. I really hope the traffic doesn't decrease in the future.

@Zirdzis Месяц назад

Could you please write power usage in idle and power usage in tests! You will use Unraid or other solution. Thanks

@hgsoftware5129 Месяц назад

Hey man, idle is about 100 watts with all drives plugged in. Will not use any raid, just jbod

@cameronlane3883 Месяц назад

@@hgsoftware5129 unRaid is an operating system for NAS systems. Definitely worth having a look into for your system

@ManzoorStrange Месяц назад

but i need more information from you about this and about earning from it

@hgsoftware5129 Месяц назад

Hey man Thanks for watching, Maybe have a look at one of My other videos?

@ManzoorStrange Месяц назад

@@hgsoftware5129 your most welcome but i want to talk to you in instagram do you have insta or something where i will talk with you

@hgsoftware5129 Месяц назад

Sorry but i dont.

@danthompsett2894 Месяц назад

I watched cause of that jazzy looking motherboard, as much as i like that case the money spent on that couldve been spent on a better motherboard, plenty of none server class pc cases that can house loads of Drives, Corsair Obsidian 900D/1000D, Phantek also make server sized cases, good job you dont have Graphic Card usage in mind for Video Editing or Gaming considering you only have 1x 550watt Power Supply, downside to that case only taking 1 PSU, FYI those PCI_E x1 slot SATA adapters come in 4 Port Versions as well, went down the windows route rather than Linux with Proxmox or Truenas kinda wonder what the use case is? and what about RAID? PS you can get x4 NVME PCI-E x16 Slot Cards pretty cheaply if you wanna use that other x16 slot as long as you can bificate the slot into x4x4x4x4 for each nvme drive on the card.

@hgsoftware5129 16 дней назад

Hey man! The mobo i allready had - so Big bonus. The case is cheap, and getting another Gaming case to hold 12 hdd whould cost the same even in used marked. Also the rack style fits My placement. ;)

@SuperSpecies Месяц назад

Did the case designers really not think of how to get the drive cables past the fans?

@hgsoftware5129 Месяц назад

They made very Small holes, but they Where not Big enough for me :)

@cordlesswire 2 месяца назад

well, grab a 650w sfx psu with a mounting bracket for atx and then you can install a fan on the sas controller.

@hgsoftware5129 2 месяца назад

Did you see till the end of the video? I routed the cables above and was able to have a Fan and use the powersupply that was free ;)

@cordlesswire 2 месяца назад

@@hgsoftware5129 ooops, my bad then. well… all is well that ends well i guess then, haha. and if its free, all the better. cheers!

@netbin Месяц назад

How much cost this raspberry pi nas to build?

@hgsoftware5129 Месяц назад

Hey man, this is not a pi, and i dont know How mouch it whould cost with a pi

@netbin Месяц назад

@@hgsoftware5129 nevermind, I already found prices to this raspberry pi mini rig

@declanmcardle 2 месяца назад

Where did you get the white label Seagates from?

@hgsoftware5129 2 месяца назад

Hey man, these i Got from a trusted seller i have done bussiness with before :)

@declanmcardle 2 месяца назад

@@hgsoftware5129 I'll take one of the 12TB SATA off your hands if you don't find the 5th SATA port for it...

@hgsoftware5129 2 месяца назад

Well that Will cost money ;)

@hgsoftware5129 2 месяца назад

And btw. - i have more than one available

@VictorPahuus 2 месяца назад

Awesome build - i have also recently bought a Inter-Tech case, and i think the build quality sucks. The metal do bend way to easy - and the fan setup also not make sense. It looks like it supports 4-pin fans, but no manual or logical way to get it working.

@hgsoftware5129 2 месяца назад

It works Great with 4 pin. I choose to not use molex - Its standard 4pin Thanks :) For the Price i Think that is decent

@raulmartinezlopez3338 Месяц назад

How is the name of the case?

@hgsoftware5129 Месяц назад

Its in the description

@raulmartinezlopez3338 Месяц назад

@@hgsoftware5129 My bad, went right to where you list the hardware

@hgsoftware5129 21 день назад

No problem. :)

@RiverDragonz 11 дней назад

What is the name of the case?

@hgsoftware5129 11 дней назад

Hey man, the case name is ik the description

@RiverDragonz 11 дней назад

@@hgsoftware5129 ooops just skimmed through and saw 'Case: not on Amazon' and gave up lol. my bad

@ha1fdan Месяц назад

Flot engelsk 😀

@hgsoftware5129 Месяц назад

Tak😀😅

@TheRealMrGuvernment Месяц назад

reliability = ECC ram if pushing that much data through your system with a supported cpu/mobo...

@hgsoftware5129 Месяц назад

Yes Maybe needed in the future :) for now No.

@cephas2009 2 месяца назад

So it's not a 164TB home server...

@hgsoftware5129 2 месяца назад

Why? A workshop or home, server Can be used both places. I have this kind of server at home Also.

@cephas2009 2 месяца назад

@@hgsoftware5129 I mean I agree with this, but not all 164TBs are installed at once in the one home server? No?

@hgsoftware5129 2 месяца назад

Installed- yes they are ;) running at all times - not yet - but that Will Come.

@ryokureo1657 Месяц назад

im wondering if theres someone who think this is not enough 😅

@hgsoftware5129 Месяц назад

100% there Will be ;)

@GsrItalia 2 месяца назад

Home server... and it stays in the workshop. So... no home server and title should be corrected?

@hgsoftware5129 2 месяца назад

Why? A workshop or home, server Can be used both places. I have this kind of server at home Also.

@GsrItalia 2 месяца назад

@@hgsoftware5129 Because this use, workshop or home, do not fit exaclty (IMO) to a "home server". I mean... Technically there are more home than workshops, therefore "home server" might be a bit more catchy than workshop server.

@hgsoftware5129 2 месяца назад

I disagree, a home server is just a server you Can have at home. My workshop is not a bussiness, Its a hobby room. So something i do When i relax. Not My job. Its next to My home, i Got home stuff there, like lego, old clothes and much more. I choose to Call it a home server, because you Can use this at home if you want, and build it, at home ;) You are free to disagree