Building a slatted feature wall! 

Where do you purchase panels like that to install?

you can make it with wood glut plans

Looks great! An idea: how about if you leave a full lenght panel on the door so you can't see the cut? Would hide the door even more.

Is this real wood even panel at back or ply wood with wood finish cause that is garbage or mdf. If real wood panels then what is the source suppliers?

Great video+explanation+presentation! Thank you SO MUCH for sharing your knowledge! Well done mate - NEW SUB 🙏🏻

Sebastiaan, hoe ver kan die deur open. Raken de latjes elkaar niet bij het 'ver' open doen?

Hi, wat voor deur scharnieren heb je gebruikt? wij hebben een plaat dikte van 22mm. Gr Kim

Can the door be opened from the other side?

hi, moet je de latten gebruiken bij de deur? of heeft dat te maken omdat je de kabels erachter wilt verwerken?

Amazing! It looks great and the door feature it very clever and interesting. Did you use a TIP-ON?

It seems you’re using panels on the wall. Are you buying these from somewhere or are you fabricating them yourself? Not clear.

What hinges are these

Just checked your videos, I only see the barn door you made... How did you make this one? What type of wood?

How do you do to open the door all the way out with touching one piece of wood with the other when you opening, because I am trying to to install same panel but with hidden hinges and doesn’t not open all the 90 angle, and you can see a big gap between the panels, and looks ugly.

What are the dimensions on the wood that you attach the panels to?

Hi Sebastian, pls can you tell me how did you fixed the sleds to the black back panrl? From behind with screws? Or just a fixing glue? Or some other method? Thanks for shating

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤😂😂😂😂❤

Where can I buy the push open door latch?

Hi, nice work. I wonder hiw far you could open the door with the panels installed? Could you open them further than 90 degrees? Seems unlikely as on the hinges side it would pinch where tge panels meet.

looking really great. The only point I didn‘t understand ist why you haven used hidden hinges. Just a little bit more expensive.

Stunning! Really elegant. May I ask why you cut the bottom skirting off and then put it back on? Thank you for sharing!

well hello! First video I've seen and so far I'm loving. My type of channel. New sub here.

not led ((

Wow

Why are you using a blue pencil?

What type of panels are those, and how much cost one?

You remind me of Tom Green!

What are the dimensions of the vertical chopsticks , and verry good job by the way

можно было сделать до потолка кусок на дверях они ж наружу открываютса

I can’t find the link to l-wood. Can you provide?

Good work! What backing did you use? The black part?

Im trying to do this in the next few weeks. What is the name for the pop off latch that you have used?

Hello, I couldn’t tell from the video but are you screwing the panels to the furring through the felt or through the slats? Thank you, looks way more professional than many of the other videos I have seen!

Hi all enjoy this video on this slatted project! Next episode will show more trim details and finishing!

I wonder how you did made these panels?

What is that dark material behind wood pieces?

Nice video and home, congratulations! :) Where I can buy these panels?

is that wood looking plastic panel (wood panel) or real wood?

This is amazing Sebastiaan and Thank You for the video. Question for you, did you used screws and put it in the "black" part of the panel or just finishing nails into the oak wood?

Fantastiese werk. My Amerikaanse man dink ook dit is wel gedaan.

For the slats at the door, instead of door height why cant it goes all the way to the ceiling?

can these be screwed into a plastboard wall without fixings if so what screws should i use thanks

I would appreciate sound comparison with and without the panels

I would like to know what material black did you use for the background of wood.

Lovely work. Did you use regular common black door hinges or are they special? How much additional spacing between slats to provide clearance?

How did you make the custom door?

where did you buy the pre fab product?

De que material es el fondo negro?

What size wood did u add to the wall?

Nice work! Where can I find these panels in the USA (California)?

Liked - Subscribed - Dinged!

meow

I want an easy solution, to use the door space on the wall, a wall paper covering door AND wall around, any ideas, suggestions ?

What hinges do you use so that the door slats when opening doesnt touch the wall panel slats.

Where is the part 2?

That door downstairs: how many degrees can it open without breaking the slats?

It looks great! But What’s the material of the black backing wall and the wood slats?

Looks great 👍 did you also install the hidden door? If so, why didn’t you choose invisible door concealed hinges?

Welke snapper hen gebruikt ? Mijn deur is 38 mm dik en met stiften van blum kom op 37 mm kan ik geen vingers tussen krijgen

Great video! Few questions guys to anyone that can help. 1- When cutting a reveal, I’m finding it super tricky to not splinter the veneer. I’ve tried everything and came to this video specifically to see how you cut around plug sockets. I’ve tried mounting the socket to the paneling but you can see behind the socket when looking down the slats… so this isn’t an option. We have mounting boxes available in the uk also, tempered to use these if I can’t find and easier way to do it. 2- Is there a particular blade to use on the jigsaw that would help not chip the veneers?

Hi there, i'd like to do the same project so i was wondering what kind of glue you use to stick those panels up on the wall? Thanks, nice work!

I would rather have the line above the door to run across the length of the wall to give semblance of deliberate design and divert focus from the door

nice vid

Looks good, I like the idea of hiding the extra space.

Whats awesome is that the door is hidden and that space is used, wow, excellent

Looks great, have tried doing the same with secret hinges but the slats touch each other and give a relatively narrow opening. Any specific hinges you recommend to facilitate at least a 90 degree opening please? Thank you

Is dit in Eindhoven?

What kind of hinge did you?

Lovely

😍love that wall💯

You must of paid a nice few bob for the panels, looks very good 👍 👌

Great video, can you make the aku panels yourself?