Building a Squaredrop Trailer on a Budget: Part 2 - Tongue and Hitch 

Welcome back to the channel!
Today, I am walking you through the second part of my squaredrop trailer build by addressing the tongue and hitch of the trailer.
I am building a squaredrop trailer, inspired by @PlayingwithSticks and his budget camper. My goal is to keep total cost under $3500 dollars. This video is part one and is the initial frame building for the trailer.
Supplies and cost
60 ft - 2x2 square tube at .125in wall thickness - $450
3d printed threaded adjusters - www.thingiverse.com/thing:577...
50 degree A frame hitch - $30
Amazon Affiliate Links
Purchases made through some store links may provide some compensation to the Channel
.030 mig steel welding wire (YesWelder)
amzn.to/3L4SYEL
YesWelder Welding Hood
amzn.to/3OLAYV9
Tillman Gloves (technically mechanic, but great for most tig and mig IMO)
amzn.to/43Y6ovu
Welding Magnet
amzn.to/44XNoi6
Welding Table
amzn.to/44RdyTI
Southwest Trailer hitch 50 degree
amzn.to/4eQg3ef
Lincoln Welding Sleeves
amzn.to/4eT4uDs
Dewalt Metal Chop Saw
amzn.to/4bYPcLd

Авто/Мото