Building a Work Shop: Framing Overhangs and Preparing for Roof

Подписаться 1,7 млн

Просмотров 141 тыс.

50% 1

On today's episode I take you through framing overhangs on a post frame and why we install our tails separately. Also, I show our double X bracing that we use for shear until the steel diaphragm is completed. I wrap up the episode with prepping for roof, and the process we take to straighten and square the roof structure prior to installing our steel!
I quickly run thru what it's like when you show up to site after a snow fall. It's not fun, but it's part of building in the winter in the midwest!
If you'd like to support me and the channel for putting out the videos, you can purchase RR Buildings Swag below!
Shirts
www.rrbuildings.bigcartel.com
Hats:
goo.gl/1uswGk
Instagram:
rrbuildings
www.patreon.com/rrbuildings

Опубликовано:

9 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 366

@jessicahailey4763 Год назад

It’s actually a very well written and comprehensive book ru-vid.comUgkxhgbP-6hUnXu_QRaoHgLztgsI0YF3HqR0 . I wanted to pair this with an updated book on local codes to start planning a post-retirement dream shop. I think I have just about everything I need between the two. The extra plans available for purchase towards the end are priced almost as much as full home plans, not little sheds however.

@Phoeff99 5 лет назад

That bit with the exposed screw as a leverage point for the hammer to level the sistering piece was so sweet.

@RRBuildings 5 лет назад

Leverage is key on post frames

@Relfy75 5 лет назад

sure was... :)

@Phoeff99 5 лет назад

RR Buildings yeah but making it look so easy and smooth is a bonus. 👌🏼

@RBallarddesigns 5 лет назад

It’s a real testament to how good you guys are. 1/8” off and making adjustments. Most contractors would be 1/2” off and say it was good enough

@daved7024 5 лет назад

Nice job, very professional, sharing your talent is much appreciated, sorry for the lousy weather.

@jameskauffman8405 5 лет назад

I'm glad to see you show that every can't be a great day to get thing done. We'll get it done tomorrow. That life.

@flyifri 5 лет назад

In the real world, I'm loving everything about your show in fine detail.! I think you guys are doing some amazing work, and believe you to have an awesome crew. Thank you all very much, for your understanding and incites into the beauty of accuracy by design. Outstanding, and I thank you for sharing your precious time with me. Thank you again from someone who knows.! Donny

@michaelbowen984 5 лет назад

This was better than the super biwl

@Joshua79C 5 лет назад

Spell check.

@scottfranklin3713 5 лет назад

Mike Rowe would be proud of you guys showing how cool it is to work with your hands!

@RRBuildings 5 лет назад

It sure is

@bstevermer9293 5 лет назад

Like the screw and hammer trick!!

@paulkelly1702 5 лет назад

Kyle, you are one freeking stud working in that cold.

@garybratton7250 2 года назад

We are building our 56x40 barn, and using you for a reference. We are 66 and 71, so not quite as quick, but doing fine. Ours. Is 17 high to fit the RV. 4 trusses set and if the wind dies some we will be squaring and overhangs shortly. Sure do appreciate your help!!!

@Chromedome38 5 лет назад

Kyle... I'll keep it short &sweet. You are the Master of Perfection!

@keananf 5 лет назад

I hold down a desk during the weekdays, When I get tired of filling out TPS reports I watch your videos. I don't have much to complain about with my desk job. I wouldn't mind being outside building stuff though. If I could start over the day after high school I would go get a job in the trades. Construction and building stuff is an honorable profession. Keep up the good work.

@mikeoneill5239 4 года назад

The movement you achieve with the chain is amazing!!

@Woodman_Custom_Sawing 5 лет назад

I've been "researching" pole barn construction and have to say, you have it down pat. The perma column brackets and your method of raising the walls is quite slick. Much better than the way we use to do it. I'm preparing to build a huge pole barn for horses and an indoor riding area when I found your videos on how you put the up I knew putting poles in the ground was not the way to do it. I have 70 12' sono tubes I got for free and plan to do a perma column like you are doing.

@kevinhughes6519 4 года назад

Nice to see people with the higher level of standards making your end product a cut and then some above all! Nice work

@HDWRIGHT409 5 лет назад

Love watching you guys work and give me ice, snow even heat over mud anytime.

@frankirwin1445 5 лет назад

Appreciate your eye for detail. That works everytime for clean job.

@micahgoodreau 5 лет назад

@25:38 great shot showing the end fascia straightening.

@598camaro4 5 лет назад

Your stuff is top notch...great attention to detail

@RRBuildings 5 лет назад

Thanks

@Davebaker364 5 лет назад

Winter always a bad time to work with! I feel the pain!

@johnnyappleseed1387 5 лет назад

You should post more content of problems that you have so I know your actually human and do mistakes I’ve watched you do a lot of building and I’m always envious of how well your team works together and how well and efficiently you build you are what everyone should aspire to be

@kristiwilliams940 4 года назад

I think ur describing every detail I think ur an awesome builder

@stevenbrowningsr1144 5 лет назад

Great to see that others have days that aren't completely worthwhile.

@rayvaught4252 5 лет назад

You definitely know your stuff with pole barn style building, going to put up 30X30 shop in North Idaho next year so I am sponging as much knowledge as I can. Appreciate all your expertise Thanks Ray

@RRBuildings 5 лет назад

Awesome ray thanks for watching

@joshreed7102 5 лет назад

I couldn’t hammer a nail straight if my life depended on it but I love watching these builds.

@rasmuskorsholm9626 5 лет назад

Hi Kyle. I appreciate that you show the same stuff again. I think I’ve finally figured out how it all works when you’re straightening the building 😅

@randyfarmer1107 5 лет назад

Went and bought the new grk screw bits. A complete and total awesome investment. They are great

@RRBuildings 5 лет назад

They are the best man

@tobaccofarmer4life 5 лет назад

absolutely love watching you guys do things right ! Its so nice to see there actually still is someone who gives a $%^& and takes pride in their work. Anyone fortunate enough to have you build their building has won the lottery, because those are about the same odds as finding another builder in your same league. You are living proof that "GOOD LUCK" is when opportunity meets preparation. Thank-you very much for these videos.

@rongade6912 5 лет назад

Hey thanks for the splice joint trick with the screw to adjust the planes

@RRBuildings 5 лет назад

Yeah buddy didn’t know how many people would pick it up

@fatmajuma4080 3 года назад

thanks for your opinion, beside i appreciate you shed and coop related things building programs

@Hrystalev100 5 лет назад

Thank! Good job guys! Hello from Russia (Siberia)

@General_Confusion 5 лет назад

Leaf blowers are the kiddies for fresh snow removal.

@ddcoxgalaxie 5 лет назад

WE still learning! So keep showing/sharing!

@braydonscully4646 5 лет назад

Really starting to come together ! Great job! I liked seeing the detail on the straightening/squaring process. This helped me to really visualize it. Stay warm!

@abefrohman1759 5 лет назад

Some handy tips tricks and information.

@augustreil 5 лет назад

Beautiful work. Gotta love overhangs, On a building this tall, I would have opted for 4 footers ! Thumbs up !!

@kickit59 5 лет назад

Kyle very good information on how to get a building square! This project is coming along really good! My last job I worked outside all winter after 28 years baking in an aluminum smelter. So I do understand how the temperature extremes can make life harder and more difficult to get the work done! Anyhow thanks for the great video content!

@sh839c 5 лет назад

Your precision is really impressive, it's great to watch you guys build.

@joelitty6103 5 лет назад

Great videos. There is a lot to learn from you guys. I’ve been out of the trade for a long time but I’ve been doing a lot of home improvements and these video help bring back the skills. Thanks and keep the videos coming.

@NickWhite630 5 лет назад

That last shot of the gable fascia swaying was awesome, really depicted what was going on very well!

@noproblem2big337 3 года назад

Not the fascia swaying just the camera on the scissor lift moving, the building is very sturdy...

@halhan100 5 лет назад

Nice work.

@marcelpilon5279 5 лет назад

A speed square makes a great scraper

@top-notchcontracting2248 5 лет назад

To be able to do roof steel I have used roofing torch with a 20lb propane tank...just keep it above the Perlins a bit and melt the ice quick ....just really depends on how bad the job needs to be finished...if you have time just wait it out it not melt it n keep it moving👍just a tip

@bowhunting1013 5 лет назад

Loving the videos!! My favorite is the fascia and metal trim fascia , I have learned a lot from your videos, thank you and god bless!!

@RRBuildings 5 лет назад

Awesome TVs makes man

@bretlambky 5 лет назад

My respect, I hate snow and the cold. I am a fair weather builder, I guess when you do it as a hobby vs a full time job you have options...lol The shop is looking great!

@lomparti 5 лет назад

That lumber looks like really nice quality.

@cdngamereh 5 лет назад

0:52 yupp 60' in the air and buddy didn't clean off the supports that had 8 inches of snow pact on the shoes. was a fun ride.. thankfully we were installing more x braces and we had the cable winch in hand took our life line and wrapped it around like a grapple. kinda the same feeling i had when i bungee jumped.

@Pete-from-Tn 5 лет назад

Enjoy the video for sure. And learn something every video. Keep up the great work.

@TheSquibt 3 года назад

Tip: Change your socks at lunch time....Change into another pair of boots/shoes too....you’ll find it so much nicer to work with dry warm feet in the winter time. It really boosts your morale and makes you feel warmer when your feet are dry. A one piece “Gumby Suit” is nice too...like a snow suit but for work....keeps the back warm.

@samuelbacon1596 5 лет назад

Kyle love the screw trick when I never thought of that that's a good one I like that thanks for that one prescient it keep up the good work stay warm young man do

@pjseiber2774 5 лет назад

Really interesting video. Keep up the great work also enjoy the remodeling.

@zach_hewitt 5 лет назад

Another great video. Your insight and tips has helped me tremendously with the building of my own pole barn. I can really talk to my builder with a more in depth knowledge of how things should be built. Keep up the great work and videos!

@n0rth3rnlight 5 лет назад

You ARE such an inspiration. And I learn so much.

@RRBuildings 5 лет назад

Thanks mike

@bfarmer7 5 лет назад

Fellow carpenter in New York covering lumber is a must unless you want to spent hours scraping

@TexSavage 5 лет назад

Enjoy your videos. Thanks for sharing.

@rjb77 5 лет назад

A lot of very helpful info as always, Thank you!

@csabimori1644 5 лет назад

Ti vagytok a legjobbak!

@cameronbarksdale7631 5 лет назад

I do agree that the new grk bit design has a better bite on the screw. I use GRKs a lot and I absolutely love them.

@RRBuildings 5 лет назад

Night and day different in my opinion

@daveshepherd7582 5 лет назад

I’m hooked on the idea of building a post frame shop after finding your channel. But I think I’ll wait til it warms up a bit!

@jgk9820 5 лет назад

Very much appreciate the detailed explanations.

@jounatherton7294 5 лет назад

looking brilliant m8 . fantastic boss .

@stevesmoes6872 5 лет назад

Hey Kyle I really enjoy your videos. Watching the fascia move with the chain was really slick. Could you show how and where you guys are connecting the chains to make that fascia on the gable end move where you want it to. Thanks, stay warm and keep up the great content!!!

@RRBuildings 5 лет назад

Steve Smoes yes I hope to do a dedicated video on chains

@stevesmoes6872 5 лет назад

That will be awesome, I will be looking for it.@@RRBuildings

@billsheffield4572 5 лет назад

Your attention to detail really impresses me, unfortunately I am outside the area you will build in. Oh, it's about 85 and sunny here right now !

@marcelpilon5279 5 лет назад

I'm from North Bay Ontario and we have a lot of snow great with a speed square

@ianamck 5 лет назад

I am not a tradesman of any type. But love the videos as they give an insight to something I have no idea about. Intrigued about the maths you use and how easy you make it seem.

@creativesymon 5 лет назад

The repeating of the same stuff is the best way for it to sink in. Keep it going :) Also...no such thing as peak. We can always get better ;)

@bradbusch9585 5 лет назад

Well explained big guy keep it up brother

@mrmrshandymanservices4780 5 лет назад

Love all your videos Kyle. Cheers!

@joopterwijn 5 лет назад

Guess you have to have tarps ready for your winter job side storages... maybe a roof burner to quickly get the ice of.

@thomasflannery8932 5 лет назад

This is why I measure twice and cut once but in this case measure once nail once lo,l plus it will help u remember the measurement

@TJSWOODWORKINGSHOP 5 лет назад

You guy's are so awesome at what you do much love Family and I will see you later :)

@alant5757 5 лет назад

Most “snowflakes” would have probably called in a snow day. You guys are VERY professional and I hope someday when I FINALLY get to have a shop built that I can find someone as professional as you guys

@RRBuildings 5 лет назад

Thanks

@eldonmoler9789 4 года назад

Great videos! Good advice and information.

@chadlandry646 5 лет назад

you could always use ratcheting chain binders to adjust you buildings.

@seanomeara7210 5 лет назад

You should do more of these videos I really like them

@masonhall7361 5 лет назад

Interesting trick of getting the end rafters to match up nicely at 10:08 in video. Maybe a little explanation of that? Great video.

@JoeGP 5 лет назад

love the unedited banter and "bloopers"

@RONDSMITH 5 лет назад

Really enjoy watching you guys work. If you want to come to warmer weather I’ll let you build me a 48x60x16. Going to be 75 degrees this week in Ga.

@makapalatrace8385 5 лет назад

Good vid as usual, I like the sentiment at the end.

@ckone671 5 лет назад

nice work guys!

@patjohnson9859 5 лет назад

KYLE MANY THANKS!! I have subscribed & almost watched every video. some more than once!! love the educational content as well as the honest mistakes you learn from on the job and using a few viewers ideas.!! I will use to save a lot and build my own shop correctly in detail efficiently in the future.at 13:56 forward... I like how you use that magic tape measure that jumps by itself to each board when measuring.. needs to demonstrate that one on tools day..LOL

@audiomantim 5 лет назад

That Martinez speed square makes for one expensive ice scraper.

@RRBuildings 5 лет назад

Haha but it works

@RedBeardCarpentryWoodworks 5 лет назад

Stay warm brother!!

@mmanut 5 лет назад

Always Great Content‼️👍👍🔨 Vinny 🇺🇸

@sonnybeltran7096 5 лет назад

Dude, you guy's are awesome!! 👍🏼🤘🏼💪🏽🍻

@amjorgy1 3 года назад

Looks like you found another use for your framing square... ice scraper!

@CreamyCornCob 5 лет назад

Keep up the fantastic builds!

@TRUMPSprisonSOAP 5 лет назад

these videos are great keep up the good work sir!!!!

@TheRooster1122 5 лет назад

Damn I sure learn a lot of Pro Tips on your channel and for that, I say Thank You Kyle!! Enjoy it what ya talking about................!!!

@sethwatson8952 5 лет назад

Very nice - GRK screws, my preferred brand. Didn't know they re-designed them. Nice job as always.

@accomack100 5 лет назад

Time to expand in the South!!!

@BrickXBrick. 5 лет назад

Y'all hiring? lol Love how you guys pay so much attention to detail. Don't see that much anymore. Great vids, keep up the great work!

@justinantwine6921 5 лет назад

Yall ought come to Texas and build. I'd love to have a barn like that!

@craigclemson9642 5 лет назад

Buy a cover to fit a small camp trailer about same size as your lift works great like the work you guys do

@johnmccallum9542 5 лет назад

TY for the vids,, Good info for sure.

@burtsoe1947 Год назад

Good job.

@nickp1868 5 лет назад

I bet the polar vortex helped productivity haha. At least the snow is almost melted away now from these past two warm days... felt like summer.

@RRBuildings 5 лет назад

Sure did wow

@iowamatt2519 5 лет назад

Ya it melted all the snow, but our site got destroyed today with the skytracks running all over. Now we're getting ice fot the next couple days here in eastern Iowa

@zippypinheadolo7731 5 лет назад

watchin the video on adjustment of the end of building to line it up was worth a thousand words should do more up close video where possible mr de mill keep up good work

@RRBuildings 5 лет назад

Thanks for the feedback