Тёмный

Building an 8x8x8 LED Cube 

JPMediaProductions
Подписаться 2,5 тыс.
Просмотров 114 тыс.
50% 1

A past Summer 2013 project, but I now have the computer power to edit all the shot HD footage (over 150 GB of data in photo and video).
This video shows the time-lapse of me building an 8x8x8 LED cube that uses blue colored LEDs. The project took an extremely long time to do. The video DOES NOT cover any design aspects or step-by-step of the schematics, software, or LED controller for the LED cube.
In some parts of the video I use different methods (like using Silly Putty) to try and get the cube assembled but I later find a better one. I kind of just built this without using any real manual or instructions. Getting the application to work (the real deal) was also a struggle and it seemed to work eventually.
I hope you enjoy it and of course the music!
Images:
gust.box.com/v/8x8x8-LEDCubeP...
The soundtrack/music is licensed for commercial use under Creative Commons License 3.0 / Public Domain Mark 1.0 and permission of its authors and composers.
1) Valient - Part of the Renegade X soundtrack
2) Plasma3Music Remixes
Portal 2 Remix - Reconstructing Science
Mass Effect 3 Alternate Main Theme
/ plasma3music
3) Post - Haute Culture
Free Music Archive
4) CMA - You're Free (Freedom EP)
CMA Music
• CMA - You're Free (Mel...
/ epzonix
creativecommons.org/licenses/b...
5) Naikee - Journey
Argofox Creative Commons
/ mmmontagemusic
6) N'to - Trauma (Worakls Remix)
/ nto-trauma-worakls-remix
archive.org/details/NtoTrauma...
creativecommons.org/publicdoma...
7) PureBells - Adrenaline [Creative Commons]
/ purebells-adrenaline-c...

Наука

Опубликовано:

 

4 сен 2014

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 69   
@AnilArya51
@AnilArya51 4 года назад
It needs lot of patience ,I appreciate you for you hard work and patience
@oliverrudolf1359
@oliverrudolf1359 7 лет назад
Hi JP, amazing project, documentation, planing, done and result. Passion, patience, consequence doing for a successful result. Well done. Oliver
@RossPotts
@RossPotts 8 лет назад
clever! you hid each plane's "feeder" within the cube, making the outside very clean.
@konferansjer
@konferansjer 9 лет назад
Pedantic job, congratualtions!
@MrMatas123456789
@MrMatas123456789 9 лет назад
Nice work man!
@wasanthawimaladharm
@wasanthawimaladharm 8 лет назад
one word "excellent"
@enriquebenitez3375
@enriquebenitez3375 8 лет назад
very good... congratulations friend...
@scotttaggart
@scotttaggart 8 лет назад
very nice!!
@leon9357
@leon9357 6 лет назад
Ok man, will try it. Thanks.
@thangle4959
@thangle4959 9 лет назад
OMG! that great! you awesome man
@takiskool
@takiskool 9 лет назад
amazing bravo!!!
@yannickdocq9781
@yannickdocq9781 4 года назад
nice work, i just made a 4x4x4 and having issues coding it. but it works
@Qmbos
@Qmbos 9 лет назад
Просто,жесть!) Как у тебя нервы не сдали?)
@shaokatalikhan3643
@shaokatalikhan3643 4 года назад
wow
@timothybilly3301
@timothybilly3301 9 лет назад
Excellent work, I used the LED lead frame method which is not quite as pretty as the straight buss wire frame. Thanks for sharing. if you could post the code you use that would be great also. I used the Arduino Uno, but I can modify the code, thanks again!
@riazaslam2163
@riazaslam2163 7 лет назад
hello my friend i have just watched your video i just call you friend ( because you deserve to be called friend ) for the long days you had to finish it. i am going to do the same thing soon thank you for this video. this will help me and to prepare me what's coming and have some ideas how to make one of these cubes. i did not release how painfull it going to be until now.
@donaldhenke2750
@donaldhenke2750 4 года назад
i like your video. i thinking 64x64x64 rgb cube
@danielebling
@danielebling 6 лет назад
Wish there was a little more instruction with this its exactly the way i want to build mine
@gilbertoaguiluz2906
@gilbertoaguiluz2906 8 лет назад
Hey man, I really loves your LED cube but I wold like know what is the program of you use for desing activation of the leds and you use a Arduino or other controller? beforehand thanks and nice Job!!
@codingtimes3199
@codingtimes3199 7 лет назад
au début bien sur mais excellente video
@hastiamazing5468
@hastiamazing5468 7 лет назад
u are an hacktivist i can see that at 14:11 welcome bro thanks for being one of us over 9000 I lost my ipod
@codingtimes3199
@codingtimes3199 7 лет назад
please your tuto ils good but i want that you helpe me witch thé arduino code that you used.
@amazingdeveloperteam286
@amazingdeveloperteam286 6 лет назад
you connect first negative terminal
@abnercv
@abnercv 9 лет назад
where did you get that stand/base from ?
@codingtimes3199
@codingtimes3199 7 лет назад
stp peux tu m'expliquer comment tu as fait la programmation ?
@btxchanel4718
@btxchanel4718 8 лет назад
i need your code,,,, can you ? please.....
@MrCrystan
@MrCrystan 8 лет назад
how do you program such thing?
@jyoutishmanroychoudhury4719
@jyoutishmanroychoudhury4719 8 лет назад
what microcontroller are u using
@ashrafshealthvlog7385
@ashrafshealthvlog7385 9 лет назад
how can i get the circuit board
@mishacol
@mishacol 4 года назад
Cool. What soft you use here 33:00?
@krypton904
@krypton904 7 лет назад
what name is of this program?
@leon9357
@leon9357 6 лет назад
What is that long wire you used to connect all the leds in a row?
@JPMediaProductions
@JPMediaProductions 6 лет назад
Leon That is a galvenized steel wire.
@leon9357
@leon9357 6 лет назад
BUt I tried it with the same wire, but the wire could not catch the solder, and easily detached. What to do man?
@JPMediaProductions
@JPMediaProductions 6 лет назад
Have you tried to pre-tin the wires? You may need to some light sand paper to roughen the surface to make soldering a little bit easier.
@javikonstz
@javikonstz 3 года назад
Where did you buy the circuit?
@Penfold8
@Penfold8 7 лет назад
What kind of caliper are you using to gauge the distances?
@JPMediaProductions
@JPMediaProductions 7 лет назад
Penfold8 These were cheap digital calipers I got at Home Depot awhile back. Their accuracy is okay but I recommend going with Mitutoyo calipers for precision and important work.
@chamikahirushan6549
@chamikahirushan6549 7 лет назад
please give code
@Penfold8
@Penfold8 7 лет назад
where did you get those straight pieces of wire that you connect the layers to?
@JPMediaProductions
@JPMediaProductions 7 лет назад
Penfold8 I got these at a local hardware store. It's galvanized 18 AWG solid wire.
@JPMediaProductions
@JPMediaProductions 7 лет назад
quangluu96 Make sure to sand the area you are going to be soldering to make it easier.
@AbdulSamadSami85
@AbdulSamadSami85 7 лет назад
Heyyy dude i m also making this project for my College and the problem is i dont want to use resistor and transistor etc ... what kind of micro controller you are using??? please tell me..
@JPMediaProductions
@JPMediaProductions 7 лет назад
Solution 's I was using an Arduino based board.
@AbdulSamadSami85
@AbdulSamadSami85 7 лет назад
JPMediaProductions can u please tell me the board name so i can buy this board from market..
@JPMediaProductions
@JPMediaProductions 7 лет назад
Solution 's Unfortunately I don't have the cube anymore or anything related to it left. But the board I believe is an Arduino Mega. There's a bunch of code and multiplexing processes available for it.
@AbdulSamadSami85
@AbdulSamadSami85 7 лет назад
JPMediaProductions and which type of led u used in this project
@JPMediaProductions
@JPMediaProductions 7 лет назад
***** I'm using 5mm LEDs, "straw hat" kind. Not the round dome kind. Round dome will work okay, but the "straw hat" allows for better even distribution of light. This will make the cube lighting look much better.
@legodesigns1
@legodesigns1 8 лет назад
which wire do you use for this project
@mirumir9594
@mirumir9594 8 лет назад
+LEGODesigns this cube is here www.ielectronicparts.com/product-category/do-it-youself/
@JPMediaProductions
@JPMediaProductions 8 лет назад
+Miru Mir This looks like a good kit and virtually requires no coding or schematic understanding to build it unlike mine. Thanks for posting.
@Dilshathmohamed
@Dilshathmohamed 5 лет назад
We need instructions pls
@practicalskills
@practicalskills 8 лет назад
What is your LED spacing?
@JPMediaProductions
@JPMediaProductions 8 лет назад
+practicalskills 17.5 mm spacing from the center of each LED.
@jonathanschiesl6185
@jonathanschiesl6185 8 лет назад
+JPMediaProductions What kind of metal rod/wires do you use to connect the led's?
@JPMediaProductions
@JPMediaProductions 8 лет назад
Jonathan Schiesl I used 20 gauge single strand stiff wires to connect the LEDs.
@yashgupta8945
@yashgupta8945 4 года назад
Tumhara video download nahi ho raha hai maine subscribe kardia hai
@isurutharangajayalath6832
@isurutharangajayalath6832 8 лет назад
this PCB send me
@SuperTechIT
@SuperTechIT 6 лет назад
theledcube.com then some
@dxnguyen07
@dxnguyen07 9 лет назад
OI OI OI OI OI !
@CobusGreyling
@CobusGreyling 9 лет назад
Dennis Nguyen Dendi!? :
@codingtimes3199
@codingtimes3199 7 лет назад
la vidéo est rapide on n'arrive pas à bien suivre
@jimmyok7420
@jimmyok7420 7 лет назад
Here is LED Cube www.ielectronicparts.com/shop/do-it-youself/3d-lightsquared-8x8x8-led-cube-white-led-blue-ray-new-diy/
@dokbob5795
@dokbob5795 7 лет назад
Substitute the 'music' with your voice telling us what you are doing with what and why.
@D-K-C
@D-K-C 4 года назад
Ъ
@ronaldfernandes5697
@ronaldfernandes5697 4 года назад
Crap
Далее
How to make a 8x8x8 LED Cube at Home
16:49
Просмотров 1,6 млн
Schoolboy - Часть 2
00:12
Просмотров 6 млн
Наташа Кампуш. 3096 дней в плену.
00:58
What is going on? 😂 (via haechii_br/IG) #shorts
00:15
ЮТУБ БЛОКИРУЮТ?
01:52
Просмотров 859 тыс.
Cubo de LED 8X8X8 - Passo a Passo
42:43
Просмотров 703 тыс.
8x8x8 Led Cube AliExpress
14:04
Просмотров 4,7 тыс.
How To RGB 8x8x8 LED CUBE - The BUILD!
28:12
Просмотров 562 тыс.
How to make a Big LED Cube at Home 8x8x8 LED Cube
16:07
How to Make a DIY Dream 8x8x8 LED Cube at Home
12:23
Просмотров 51 тыс.
3D Spectrum Analyser (1280 LEDs) - MAKING OF
22:57
Просмотров 2,3 млн
Making Infinity LED CUBE
18:48
Просмотров 13 тыс.
Samsung laughing on iPhone #techbyakram
0:12
Просмотров 7 млн