Building an Epic Sport Car Reverse Trike Roadster - Step-by-Step DIY Project

Подписаться 366 тыс.

Просмотров 812 тыс.

50% 1

Building an Epic Reverse Trike Roadster - Step-by-Step DIY Project
In this exciting video, join us on an incredible journey as we build a one-of-a-kind reverse trike roadster from the ground up. With a powerful 150cc engine, a sleek green exterior, and a unique steering wheel design, this roadster is a true masterpiece.
Watch closely as we take you through every step of the construction process, showcasing our meticulous craftsmanship and attention to detail. From welding the tube round frame to fitting the chassis, you'll witness the transformation of raw materials into a stunning roadster.
But the adventure doesn't stop there! Join us on the thrilling test drive as we hit the open road and unleash the power of this extraordinary machine. Feel the wind in your hair as we navigate turns and feel the adrenaline rush through our veins.
Whether you're a DIY enthusiast, a car lover, or simply curious about the world of reverse trike roadsters, this video will inspire and captivate you. Get ready to embark on an unforgettable journey of creation and exploration as we bring this remarkable roadster to life.
Don't miss out on this epic experience! Hit that play button and prepare to be amazed by the beauty and performance of our hand-built reverse trike roadster. Get ready to witness the ultimate fusion of engineering, craftsmanship, and passion in action.
Plans and blueprints available here : www.cheralauto.com
Project by : CHERAL AUTO
Designed and built by : CHERAL AUTO
cheralauto.com/
Email : business@cheralauto.com
Facebook : / cheralauto
Instagram : / cheralauto
Blogger : cheralauto.blo...
Twitter : / cheralauto

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 312

@ewanbaxter9199 Год назад

Very good. Just one thing, threaded rod is the worst bar you can use for pivots, there is only contact on the peaks of the threads which will cut unto the surface so the joint will not last long. Smooth rod with threaded ends will be better.

@haisupercar 11 месяцев назад

làm rất tốt bạn của tôi ạ chúc nhiều sức khỏe nhé

@MarinhoPrudencio Месяц назад

Você é o cara mesmo hein, parabéns pelo seu trabalho

@brucewald4078 Год назад

Interesting build, enjoyed the video. Makes me want to get a welder and do a build. Always wanted a reverse trike. I would use a bigger engine and two shocks on the rear swing arm. Cool build have fun with it.

@TuckerArnold-c4f 2 месяца назад

i was thinking the same thing my boy

@Vinhhienvlog_1983 Год назад

Rất tuyệt Very good, good health

@TreDeuce-qw3kv Год назад

Crude but affective and you have to applaud the effort. Make it electric and you have reverse.

@flaviolopeslopes1669 Год назад

Cara que show, to conhecendo o teu canal agora e ja vou me escrever. Top d+.

@albertkoks2268 Год назад

Супер люкс вариант! Браво!!

@ajmalkhan963 Год назад

Nyngs

@joaquinbarrios9628 Год назад

muy buen proyecto, te felicito esta muy bonito he estado tratando de hacer el mio pero no havia visto uno tan bonito y facil de hacer lastima que no tengo las medidas porque en el video cuesta calcular las medidas

@CHERALAUTO Год назад

¡Gracias por tus palabras y felicitaciones! Me alegra que encuentres el proyecto interesante y bonito. Entiendo que las medidas pueden ser un desafío al momento de intentar reproducir el proyecto. Si necesitas ayuda con las medidas o alguna información adicional, no dudes en preguntar. Estoy aquí para ayudarte en lo que pueda. ¡Buena suerte con tu proyecto!

@aurelianopulgarin2036 Год назад

si podria facilitar las medidas seria de gran ayuda para barios

@clubh1 Год назад

CHAINE TROP DETENDUE, SINON BEAU TRAVAIL, BRAVO

@FNCSUK Год назад

hi guys you need to put chain tensioner on the back as it look too loose

@johnskipper432 Год назад

As the chain and sprockets wear you will wish you had tensioners on the rear suspension. And you will probably want a little bit more engine.

@albertoramonacosta1212 Месяц назад

Hermoso trabajo amigo y bien reforzado me gusta y ponerle un motor turbina jet Arg

@DhikaDhika-ny4wp Год назад

Awesome dude!!!!! 👍👍👍👍👍👍

@OLDMACK Год назад

Wow!! I am happy I found your channel, your build is awesome

@WesleyWernimont 2 месяца назад

You sir are amazing.

@CesarAugustoManriqueMacha Год назад

Soy de Perú cres mandarme las medidas del chasis te felicito por el vídeo

@derekwilkinson7939 Год назад

Grinding with the side of a cutting wheel is a absolute no no.

@CHERALAUTO Год назад

Hi Derek Wilkinson! Thank you for your comment. We appreciate your concern regarding grinding with the side of a cutting wheel. Safety is indeed a crucial aspect of any DIY project, and we always strive to prioritize it. We apologize if it appeared that way in the video. We encourage everyone to follow proper safety guidelines and use appropriate tools for each task. Thank you for raising this point, and we'll keep it in mind for future videos. If you have any other suggestions or questions, feel free to let us know.

@paulwhite7475 Год назад

Obviously no one here gives a sweet crap about safety or the guard would still be on the grinder .

@SeryKotyara Год назад

Hahaha, welding without gloves - yes, yes, yes?))))

@SG-uh6sw Год назад

Seeing that he posted the vid and none of you guys were injured in the process I’d say you guys are safe as can be

@TerrorTubbie666 Год назад

I think abandoning all safety-regulations makes more exciting videos.

@isaacmadhavan Год назад

Seems great! But why didn't you use any bushings?

@petersheamorris4852 Год назад

One, that single suspension on the back is going to cost flex from side-to-side you need to put one on either side of the corners of the rear axle or the rear box where you got the motor sitting. If it flexes back and forth or side-to-side from the center is going to cause that suspension bracket the break

@rayjones463 Год назад

ive seen several item s that will make this a short lived trike

@thedrew24 Год назад

i saw 2 in the rear at the end of the video, so i am guessing a work in progress.

@s.hooper4683 Год назад

I can appreciate his enthusiasm and the ability to take an idea and make it a reality with what was available. I just hope he doesn't kill himself in it...........................or because of it.

@GaisaSanktejo Год назад

@@thedrew24 agreed regarding the number of shocks, so possible upgrade after siting in it and bottoming that thing out

@rodericksage4451 10 месяцев назад

You might like a auto-darkening welding helmet. I wish they would let me drive one of these on the interstate.

@alcost7192 Год назад

I don't know where you live at but it looks beautiful I love the country

@roberthosking7524 6 месяцев назад

Slick. Just wondering how it is for steering? I have no experience setting up a front end but I see a lot of builds where they try to keep the a-arms parallel. Because of the angled front end, yours point forward and toward the center. Does that affect the steering? Anyone?

@Putrakokop Год назад

Woow amazing

@glebzhigaloff9555 9 дней назад

,, гробик на колёсах " )

@onieljohnson-zm6sf 10 месяцев назад

More please

@alcost7192 Год назад

Why did you put it higher on the back with 2 shocks still its nice work

@FrostSoul-qs6kq Год назад

what kind of welding machine did you use ? please tell me because I really need one for my own vehicle .

@s.hooper4683 Год назад

ALWAYS check with your local welding shop and consult a professional for best advice! That said, there are plenty of great machines out there to choose from both new and used but knowing how to weld will be the key. This will come with learning the basics and lots of practice.

@247SH 9 месяцев назад

Great work. I would like one in the UK. We had Reliant 3 wheelers growing up here e.g Regal, Robin and Bond bug. I had the former 2. There's a guy on RU-vid put a Busa engine in the latter. These all had single wheels at the front, whereas Morgan's had their third wheel at the rear and were raced at Cadwell Park Lincolnshire UK. You might guess I'm a fan of 3 wheelers.

@alcost7192 Год назад

If I do that where I live today I would get arrested and they will take the cart . Enjoy your creation you deserve it maestro

@andyplage6590 Год назад

Good build id personally cut the excess inches off the Bolts and use thinner steel for brackets etc its overkill especially with such a small engine

@davkilldav211 Год назад

So many things wrong with this build. The steering alone is so sloppy it's dangerous. But hey, until you have an accident have fun!

@N13KPE Год назад

anyone else wonder when hes going to put bushings on those pivoting points lol

@richardtaylor6761 10 месяцев назад

i dont suppose you have the plans and a parts list huh?

@romabelow6440 Год назад

Бюджетный автомобиль сварщика: если сильно хочется но денег нет...

@FNCSUK Год назад

I would also suggest using a better steering wheel as that one it's not safe

@TuckerArnold-c4f 2 месяца назад

can you make my friend a go kart plz

@babayagabest7669 Год назад

Задумка не плохая, но сделано всё скажем так если без матов (ПЛОХО) сама конструкция сварена просто ужасно, днище жестянка 0.5 любой камушек и жопу разорвет, развал колёс передних ужас просто , амортизация не работает, управление убожеское, цепь не натянута, тарахтит, если порвётся на пополам разрубает или руки по отрывает, и это только поверхностный взгляд на недостатки, ну а так на одно видео прокатиться сойдет.

@billyhaddock5540 Год назад

Dude, all of the welders out there in the world are just asking, what were u thinking? no welding gloves, welding above the welding machine, bending down on ur knees near the welding. alot of safety concerns. trike looks nice, butt it won't last long.

@mikewoike9429 Год назад

I like what you do it does take skill but when are you going to build something with a larger motor like a older cxc 500 Deluxe water cooled with a drive shaft or a Goldwing something with some nuts instead of those toys?

@epicmaster9831 Год назад

potresti fare almeno di un altro video per poi mandarlo al mcdrive

@murrayschwenning9241 Год назад

No chain adjustment. Steering wheel could easily come loose. Other than that it was entertaining.

@cristianmontero122 Год назад

❤❤

@pistolpeds Год назад

Nice build. Put a guard on that chain before it takes your head off.

@tanyalove6983 10 месяцев назад

Fantastic build. You are terrific with tour hands and I was really wondering how you got your bends so perfect. Everything fit so well it was a work of art. Just wondering how thick the steel was and what you used and the diameter and what kind was it. I think maybe you could have used loctite on the bolts that have moving parts I was impressed that the nut for the steering wheel was for a cotter pin but I did not see you pit one in. Lol. Also for uour saftey I think the back roll bar could be a liitle higher than your head. I thought you should have prestressed thos springs a little or have afjustable springs or get your friend to sit inside because yhe wheels were tilted in too much and it looked like you were really close to the pavement. Could have used a spting comoressor. Well I would have like to see you take off your gloves and coveralls at the end to see what you had underneath. Lol. Have a nice day!

@rustyevolution6298 9 месяцев назад

Very nice and I would make some improvementss. First, you can see in the video that the drive chain is too loose and you have no way of making any tension adjustment. You need to work on the swing arm so that you can move the axel to adjust tension just as you would on a motorcycle. Second, absolutely you need to install the rear brake caliper. Those two tiny front drum brakes are not going to be enough if you need to stop quickly. You can never have too much brakes. Third, as others have mentioned Bushings!!! All that being said you did a great job designing and building this fun ride. Well done!

@debeeriz 4 месяца назад

l would install scoops too, the seat blocks out most of the engine cooling

@knifeboy247. 3 месяца назад

How many millimetres was the metal pipes or gauge

@AR-wy9rq 3 месяца назад

how much does it weight about??

@simps._ Год назад

maaf bertanya macamana kamu mengatasi masalah rantai kendur pada kenderaan ini?

@edineysardinha363 Год назад

ficou muito bom

@andrewmutavi590 Год назад

😍😍

@OdailOliveira75 Год назад

Estou pensando em pedir pra uma das minhas filhas construir uma mas com duas rodas com a coroa e corrente no meio.

@OdailOliveira75 Год назад

Na verdade com eixo ao invés de corrente.

@MrDeeperASMR Год назад

the meticulous process of building a Reverse Trike Roadster, resulting in an impressive and unique sport car. Well done to the creator for sharing this step-by-step DIY project😉

@willierants5880 Год назад

Love how the video at the end was sped up to make the thing appear faster than it is.

@keithbowman8492 Год назад

Very good build but the engine that you have in there is way too small so you didn't really need to speed up the camera on your runs you could actually show the speed that it was going which is probably about 35 mph which is not that impressive black all in all pretty good build and don't use your side cutting grinding on your cutoff wheel that's a No-No I think could jump back and kill you

@Cerberus984 Год назад

With how crap his welds were I would suspect even 25 mph is dangerous as the edge of the weld beads aren't fusing to the base metal.

@mikewilliams2072 Год назад

I would raise the chassis to allow for vehicle weight before welding the shock mounts in place!

@quinlanjonesjones4705 8 месяцев назад

I didn't see how he started it, where's the battery?

@mjmellan Год назад

Oh so its clutchless like a honda cub.

@jaymcman4867 День назад

U got stick to a science

@MRKPORKY Год назад

pretty kool. I dont like 3 wheelers but to each your own.. I like the suspension pretty kool.. roll bar needs to go above your head though. if you roll it it will kill u.

@amirrana4656 10 месяцев назад

High is too dawn make it highter woth a same wheel which you used in back over all it's awesome

@mouradbouhila3975 Год назад

Bonjour. Pourquoi avoir rabaisser le chassis a ce niveau?

@mynameisjeff417 Год назад

Wow, what an amazing build! However, I couldn't help but notice a few areas where some improvements could be made. Firstly, why wasn't the rear brake utilized? It seems like a missed opportunity for enhanced braking performance. Additionally, I would like to emphasize the importance of considering a few modifications for better engine durability. Firstly, adding a bottom plate under the engine would provide an extra layer of protection. Moreover, it would be a good idea to incorporate two air canals into the bottom plate to capture wind while riding, promoting better engine cooling. Furthermore, I strongly suggest looking into upgrading the air filter or air filter box. A better air filter system will ensure cleaner air intake, preventing debris or contaminants from entering the engine. This, in turn, will contribute to the longevity of the engine and overall performance. Lastly, for optimal cooling, installing a fan specifically designed for stationary moments would be a great addition. This would help maintain the engine's temperature during idle times. If you decide to make these adjustments, please keep us updated on your progress. Your dedication to improving the build is truly admirable. Thank you! 🙏

@davetimms451 Год назад

Nice concept executed very poorly. Must have spent many hours grinding down those ugly welds.

@ironsponsor7 Год назад

Max speed?

@CHERALAUTO Год назад

Hi Iron, thank you for your comment! The maximum speed of the trike roadster is approximately 100 km/h, which is roughly equivalent to 62 mph. It's designed to provide a thrilling and enjoyable driving experience while ensuring safety on the road. We've taken into consideration various factors such as engine power, weight distribution, and aerodynamics to achieve a balance between performance and stability. We appreciate your interest and hope this information helps. Feel free to let us know if you have any more questions.

@williamguillIII Год назад

@@CHERALAUTO You're not actually selling these death traps are you?

@bunnengsealer4568 10 месяцев назад

👍

@express534 Год назад

hi nice job whats the actual cost to build you trike?

@Wolfyjinny Год назад

@6:35 I saw the wobble on the tressels, I honestly thought "Ooops, start again, no measurement is going to be accurate from here on in with a warped frame".

@nozmoking1 Год назад

Tiny motor. Looks like plenty of room to upgrade though. The nice thing about the reverse trike is that it's crazy stable and sticks in the turns like a slot car.

@eonreeves4324 Год назад

it looks like one something that's glued to the road, until it isn't lol

@CesarAugustoManriqueMacha Год назад

Hola soy de Perú te felicito por el vídeo Cres que me puedas mandar las medidas del chasis gracias por adelantado

@mirleidysarvelochacoa6537 Год назад

como se llama ese auto

@KousikRSahoo Год назад

bro how much cc engine did you use

@CHERALAUTO Год назад

Hello Kousik.R. Sahoo! Thank you for your comment. The engine I used in my project is a 150cc engine. If you have any more questions or need further information, feel free to ask.

@alainmansuy8874 9 месяцев назад

Oubli pas de mettre un tendeur de chaîne

@СергейКутовой-о3с Год назад

На. Спорткарах используют 4 точечные ремни безопасности... А тут... Вообще нет... А дуга нужна чтобы защитить голову... Смотри насколько она выше на багги и формуле1. Понтовоз одно слово..

@daos3300 Год назад

i don't even want to imagine running a grinder in a small tile covered room..

@JuanBarcellos Год назад

Em tom e quanto eu to querendo comprar

@nightsthunder7389 2 месяца назад

I can understand using a 150cc to 200cc single cylinder engine. 50mph to 60mph cruise speed should be possible. Also, that vehicle should get close to 80 mpg. The clutch is in the engine/transmission, could be operated by cable or rod. I like the swingarm attached to the rail frame. I could easily insure and register that vehicle in Michigan as a cycle. That tube and rectangular tube look to be larger than 1-1/8" and smaller than 2". Best parts....the swingarm, engine mounting and minimal cross bracing.

@DavidJohnson-ge4wk Год назад

I love what you guys are doing k wish to make my own automobiles someday

@CHERALAUTO Год назад

Thank you, David Johnson! We're thrilled to hear that you're inspired by our projects. Making your own automobiles is an exciting endeavor, and we encourage you to pursue your passion. With dedication, patience, and a bit of know-how, you can definitely bring your automotive dreams to life. If you ever need any guidance or have specific questions, feel free to reach out. Best of luck on your journey to creating your own automobiles!

@diyathomevn Год назад

you do very well, you are good at many things, meticulous process to build an impressive and unique sports car. Made me want to be a mechanic and build my own car. I would use the larger engine and two rear shock absorbers. Thanks to the author for sharing the project

@juannunez9376 Год назад

But why are the newest video and the one before it exactly the same footage like I was watching both videos and everything is the same but Its too late in the night for me to finish both I only watched 20 minutes so that's as far as I seen that they are the same video but I like the project you made so it doesn't matter

@CHERALAUTO Год назад

Thank you, Juan Nunez, for your comment and feedback. I apologize for the confusion caused by the similarity of the two videos. As you mentioned, the projects share the same chassis dimensions, engine, and front suspension. To save time in editing and production, I decided to modify only the parts that were different, resulting in the similarity you noticed. I appreciate your understanding and support for the project. If you have any further questions or comments, feel free to let me know.

@GaisaSanktejo Год назад

That needs a chain tensioner!

@Juanse1712 7 месяцев назад

i liked it but have seen this kind of diy bike kind of project a lot of times, i don´t feel a 150cc engine is enough for that size of frame and nature of project al least use a 3cilinder 1 liter engine and reuse some crashed car suspension or use a proper bike swing arm, not that poor made one, hope no one takes this comment offensive but the build quality and expectations need to become higher with each project you build...

@KairHatchet 11 месяцев назад

Weight? Stand on Weight Scale, Lift Each Corner of Machine while standing on Weight Scale. What is weight? Thanks

@ericlondon5731 9 месяцев назад

You need an auto darkening helmet

@charliespann3967 2 месяца назад

Fun project, but your welds are terrible. If you learn to weld you don't have so much grinder time.

@JuanBarcellos Год назад

O que vc fãs com os kart se vc dar pra augem eu aceito um de aniversário pode ser esse mesmo ok mais vc manda muito bem com eles

@joepalazzolo4630 9 месяцев назад

Dear Sir, Please shield the welding arc. It is too bright and makes it difficult to watch. Thank you

@nightsthunder7389 2 месяца назад

I would be interested in building a similar machine as a side by side two seater. How stable would that be side to side, with similar suspension, with only one person vs two people?

@ariindrayono1204 2 месяца назад

desaign untuk yang bisa 3 orang dong (dibelakang driver buat lagi bangku utk 2 orang)👍🙏😊

@wasser6272 11 месяцев назад

Und ein kettenspanner kommt bestimmt noch dazu. Hat Spaß gemacht zuzusehen 😊 Weite so!

@guillermoorta3001 Год назад

Hello, good morning, mate. One question if I give you some plans for. Could you help to make the frame of a bobber motorcycle so that it appears in one of your videos?

@CHERALAUTO Год назад

Hello Guillermo Orta! Thank you for your question and interest in collaborating with us. We appreciate your offer to provide plans for a bobber motorcycle frame. While we primarily focus on our own projects, we value the input and ideas from our audience. If you have specific plans or designs that you'd like to share, please feel free to send them to us. While we cannot guarantee featuring every submission in our videos, we'll certainly consider it and appreciate your contribution. Keep in mind that safety and quality are our top priorities, so we'll ensure that any design we work with meets our standards. Thank you again for reaching out, and we look forward to hearing from you.

@dontfearthereaper2887 Месяц назад

All this work and then you put a noisy filthy gas engine on it? What year is this? 1930? LOL

@pedrooscarbarreyro332 Год назад

te felicito desde Misiones Argentina muy buen proyecto tambien estoy construyendo un parecido

@alcost7192 Год назад

LA mente de un maestro es intocable

@andwjy 10 месяцев назад

Tolerance should be around 0.1mm - 10cm 🤣

@mixvideos761 9 месяцев назад

Teve que aumentar a bandeja superior para ajustar a cambagem. 😊

@mixvideos761 9 месяцев назад

Teve que aumentar a bandeja superior para ajustar a cambagem. 😊

@Weldingblitar Год назад

waow amazing❤❤❤

@ariindrayono1204 2 месяца назад

pakai mesin yang 250 Cc supaya kuat tenaganya untuk dinaiki 3 orang🙏😊

@Panzerbaer100 10 месяцев назад

Mit dem Teil würde ich keine 100m fahren

@Customskorol Год назад

every step was amazing to watch, a creative mind with tools, is unstoppable

@CHERALAUTO Год назад

Thank you so much for your kind words, CustomsKorol'! We're thrilled to hear that you found every step of the trike roadster build amazing to watch. We appreciate your recognition of the creative process and the power of a creative mind with tools. It's indeed a testament to the endless possibilities that come to life when imagination and craftsmanship come together. We'll continue to bring you more exciting projects and content in the future. Thank you for your support and encouragement!