Building an excavator grading beam from scrap metal 

Thank you👍 I plan to make one someday. I tried just dragging a pallet behind me, and it works. Also tried to attach pallet with some extra weight to excavator👍

Very interesting idea. It is somewhat limited to machines with tilt bucket options, which is not as common as a thumb. Without the tilt option you have to keep adjusting grading blade to get the machine to correct pitch, then, once you swing the house to another position, you are out of level once again. I can grab just about any piece of wood or steel with my thumb and achieve similar results, but I have to keep adjusting the angle to match the grade I need. When I'm done though, or need to add material, or excavate more aggressively, I can just toss the wood/steel off to the side and keep digging with the bucket that is still mounted on the machine. You have to disconnect and go find where you left your bucket again, or use another machine to bring more fill in. Every tool has advantages and disadvantages. Great welding project!

If we put in 3 way hitch point in compact tractor will work?!

Great idea, but you need to get the attachment level and then back up in reverse... this way the height of the attachment is always level vice trying to operate the attachment level. Hope this makes sense.

Wow, Bach!

Good job comrade .

I like this idea 😃... I don't have the skills to do it, but I like it 😄

I always get a charge out of videos saying we’re making something DIY out of scrap, but then proceed to use thousands and thousands of dollars in tools to do it!!

Would it be any use if I do not have a tilt head?

Good job bud🤙

Diemention appropriate is crucial 1500mm fits my Mcr 8t 1350mm mcr6 should try something the width of the track frame or a little smaller , very versatile tool in the right hands

Hello! Can you tell me how many m2 per hour can be leveled?

2m long rsj with attachment in middle gr8 leveling bar

It behooves me why with a lathe at your use WHY WOULD YOU CUT THE SMALL BARS TO MAKE THE SUPPORT ON THE ROLLER when you have the lathe that you can cut the inside of the pipe and put the pin in it in one swift action. this would save the time and trouble of finding the size needed to make 4 extra pieces and could save making the cap's. By cutting the circle for each end you would have a more concentric circle for the roller and it would save time putting all of this together and .you would be welding the back of the pin and you could even double the piece for more strength. Other wise it all works.

Does it do what you were hoping for?

I'll tell you where Minitilt is from

Snyggt jobbat! Vad använder du för utrustning? Kanske kan lägga till det i beskrivningen. Den där sågen såg (haha) fin ut! Kul att du fått så många visningar och bry dig inte om Kerry eller vad han heter som gnäller på musiken, det gör han jämt, även på min kanal och jag har bett honom göra egna videos om mina inte duger. Ha det bra!

What kind of tilt quick hitch is that?

What is the cost of fitting a tilty to the digger

0:58 what kind of magnet is this and where can i buy it?

Good job. What dimensions has? Lxl ?

나에게 파시죠..

Some of us do not watch construction videos that play music. Goodbye.