Building Bluetooth Speaker with Wooden Tea Box 

Awesome work, dude. 😊

Great work!

De los mejores vídeos que he visto en RU-vid excelente trabajo y que lindo le quedó sólo imagínense en colores está belleza

I avoided for a very long time this video because I kept thinking it'll be another sloppy diy job. In the end, seeing that YT kept propsing it... I watched it. I have to say that you approach to this is very professional and i admire what you've done. If I would have done it I would have done just two more things: - mount the BT board so that the LED is visible; - add cheap voltmeter to get an idea about battery status

Muy buen trabajo amigo 👍😉 ese Stereo quedó fenomenal 👷👏

que hermoso eso... wow esa es mi pasion, la amo!!!

A fantastic work of the best I've seen on RU-vid you are a machine, congratulations.

You are a great genius, incredible product. Congragulation.

Good job dude👍👏👏👏👏

Well built but you should of used MDF wood as this is sound proof. Put dividers inside of box for larger speakers as mix wave vibrations can cause sound distortion.

u should fix a safety grills to speakers

Watched this before, that is so awesome, can't even imagine what it feels like to make something so cool. One recommendation would be to add PVC fiber mesh (that is usually used for PC case fans as dust filters, very cheap on websites like Banggood) over the larger speakers to protect the membranes from damage, you can cut the mesh to the right size and make holes for the screws that you have holding the speakers already, there is basically no hassle. Actually, it can be done after all this. Cheers. EDIT: Since the membrane is protruding a bit, You could use small standoffs at the screws to raise the height of the mesh, just a few mm is enough.

That Works fantastic, i loved It!

All the Best brother

wow.i like you job.very simple and perfect working job.very nice speacker.

Wow NCS. Love Alan Walker. Fancy that. Cool as bluetooth speaker.

When I saw how close you packed that little box I thought it would never sound any good.. Its actually really impressive.... well done! Genius!

I know that voice, “The Bluetooth device is ready to pair”! Great job!

Great job... So nice and useful video.love your job

I wish one could be build for me like this

Such a great Idea. I can upgrade to blasting boom. Thank you

your work finishing is much better, you crossed 1M - as my thought you can now purchase pen solder for great ..

Very nicely built. Just no wasted space and beautiful wiring job. Pity that it's not practical; I mean, you can't really take it outside, because the speakers have no grills to protect them. But still, love the video.

dude you're very good! too good, I even wanted one of these for me. Top project

Nice tutorial,but the box is very small for great sound quality!!!

2ohm per channel. It's going to heat up extrem.The amplifier is made for 4ohm.

you are born to do such things...Keep producing the good work..m a big fan of you..God bless you!!!

Nice job, I like this kind of job! DIY!

CREATIVE CHANNEL: NICE BUILD! but you have to make some research about the amps you use in your projects. this amp, in that impedance configuration will not work longer tan a few days, the loads for that amp, are: Applicable Speaker Impedance: 4/6/8/10 ohm. if you put those speakers with no Xover, just fixing those in paralel, you can reach 2 ohm, and damage the amp.(certainly more loud in exchange of your hardware life). the battery reciclyng are one of the most important things in a project like this, that is a very good point to show in the project. you can improve the sound quality making two ports instead of one port only, and made it from a 1/2 inch water pvc pipe, and fill the enclousure whit some polyfill or cotton. anyway, nice build.

Ficou show em Alguém sabe o nome da música? ?

perfect engineering. cong.

If you add passive radiator the bass will be nice🔥

Nice video, though a few points to add: 1) You need some sort of crossover/filter for the tweeter and full range speakers to do their job properly. You can get 2 way crossover kits relatively cheaply, or just use a capacitor on the tweeters to make them more suited to the treble frequencies. 2) Using laptop battery packs without checking the capacity remaining is like a game of chance. It may be good still (1500mAh+) or it might be very poor (

Just beautiful and knowledgeable. Thanks for sharing.

Очень классная и оригинальная самоделка. Лайк

Woww.. I think I would like to modify the broken simbada speakers using this methode. Amazing...

JBL Speaker on a budget :D

Great Job man 👍👌😀👌 awesome video

Awesome design! Nice idea! Good work! 👍👍

Parabéns pelo trabalho fico ótimo mesmo

Very very nice

Ficou muito boa amigao... Queria saber fazer uma pra mim, show de mais!!!

The Bluetuss device is ready to pal. Awesome! it sounds like the Bose bought in the beach.

That was pretty cool, but I have NEVER watched a RU-vid video with as many ads as this video had. Ever.

This is awesome considering the hard work and the time that it took to build it also it's an unique piece so it's worthy a lot. This is gr8!!!!!!!!

Very well done to say the least! It pays to know exactly what to do and how all the electrical components go together. Thanks for sharing!

Minha nota é 10 parabéns pelo trabalho 😎

Very nice

Звук крайне посредственный, как на видео, так и исходя из конструкции должен быть в принципе. Хорошая акустика(имею ввиду звук, пусть и в портативных колонках), это не абы что в один корпус впихнул и все. Как развлечение норм, как для акустики - проще китайскую готовую купить, тот же звук будет и меньше мороки.

great build and design so creative make me wanna build

nice.. good work. looking beautiful.

do some Bass testing on this bluetooth speaker :D i would love to see that aswell !

helpfull video

That's soooooooooooooooo COOOOOOOOOOOOOOOOOOOL! thank you...

wooow... you made it so easy... i never thought that i would do some things before ever!

looks cool I wish I had one although I am going to be getting a jbl boombox soon with my own money

2ohm per channel isn't recommended for tpa3110, it will be damaged

Perfeito amigo estou concertando bastante caixinhas de som!

quanta criatividade e muita inteligência eu gosto de assistir esses vídeos porque eu aprendo muitas coisas

I would LOVE to have this speaker. Good job

kinda loving the compact design, though i think a more fitting bass port could make it a ton better. just a basic measurement of the volume inside it, and a simple online calculator is needed for that. still really good, and compact design.

Amazing bro 😉😉

Muito criativo! Parabéns.

your work is so brilliant!

Super cool

"This Bluetooth device is ready to pair" 😂 that voice lmao! "The Bluetooth device has pair Eh successfulleeyyy"

Very cool! Superba demonstrație :) 👍

If the box is closed it would be more bass If you use two passive speakers and. Two big speakers it will sound more awesome

Fico show, parabéns cara :"), inscrito brasileiro aqui kkk

Great Work!!!!!very good...

Only 25 houses were burned down and 450 injuries were caused by this video.

Lovely done. But the speakers dont have any room left to channel the sound. Better use PVC tubing.

That is so cool dude. Love vids like this. Great work

cool idea, the "woofers" are kind of fighting each other though

wonderfull project! Sensacional...

O cara é muito bom!!! Parabéns!!!

изящно. 5+

Trabalho incrível .faz pra vender?

Passive radiator must be added on this bass!

clean build from scratch, good job!

But can you also program the Chip to maybe play a different sound when ready for pairing?

Brother super nice 😃 i want this super very good love you😘👌💖

Those speakers will make better noise if you put big cones on them. The pressure of air is making a turn backwards because the edge of the speaker is in the edge of the box. A cone like a trumpet. Probably a metal bowl of salad or something like that while in your room. You can take them apart for mobility. Very nice work, you inspired me to do something similar, if I do I'll return with results.

Eres un genio man. Excelente video

it is amazing, thanks for share!!

loved,,

You are genius

Who is just watching and not making it 😂

Now all you need to do is take some fabric and make covers for the speakers!

i just love your work ,I will be happy if you helped me with blue print of six speaker rated 16 ohms 8W Bluetooth subwoofer

Muito boas suas ideias

Great work. But you should not mix different size speakers sharing same box. This will affect performance. And use all speakers on the front plate. The lateral speakers have a phase delay of 90º it will produce less bass. To produce more bass all speakers should be on front. Or also add speaker on back and reverse polarity on speaker in relation to front speakers. Regards

Esta muí bueno pero veo que conectaste en paralelo los altavoces grandes con esos pequeños, no lo recomiendo, mejor seria colocar un capacitor en serie a los altavoces pequeños para que solo reproduzcan brillos.

What’s the music used while making the device?

动手能力太强了。厉害

Muito bom. Parabéns

pretty impressive!

JBL на минималках

cool. Only thing is i wouldn't of left it bare wood as it's something you would handle and will absorb oils from your skin and in time will start looking dirty and nasty. I would of stained it and then gave it a coat of 2 part epoxy so it would have a good strong coating.

I love ❤️ this songs