Building my DREAM GUITAR CNC on a Budget! (Longmill mk2 48x30 by Sienci labs)

Подписаться 257 тыс.

Просмотров 56 тыс.

50% 1

This is the stuff dreams are made of: A fast, strong, accurate CNC machine that's large enough to make 2 or 3 long scale neck through bass guitars, all for less than $1,800! This machine is a beast, far and above anything even remotely close to it's price range, and (from what I can tell) competitive with anything 2-3x the cost! For more info about the Longmill mk2, check out this link:
sienci.com/product/longmill-mk2/
join the Longmill facebook group here: / mill.one
here is the Avid Power (Makita clone) router I mention in this video: amzn.to/3VKmy85
*Prices mentioned in this video are subject to change without notice, please check the links for current pricing.
Full disclosure: I am an Amazon Associate, and the links in this description are affiliate links, which means that if you make a purchase, it doesn't cost you any more money, but I will earn a commission. I want to thank Sienci Labs for sending me this Longmill mk2 for my honest evaluation and review, I'm excited to push it's limits and see what happens!
Want a Guns and Guitars shirt? buy one here: gunsandguitars.net
Facebook: / gunsandguitarsofficial
Instagram @gunsandguitarsofficial
Support me on Patreon: / danthompson
Current Patrons (as of this video)
$5 Patrons:
Yosemite Sam
Mynameisnotjeff
David J Kitelinger
Derek Weathersbee
John Clark
Tanner Redman
David Morgan
David Vaughan
LesLamcke
Fabian Muresan
Alejandro Vega
Captain Rudy 4021
Chris Hopkins
Tony Butterworth
j
Ben Berscak
Jeff Savoie
Mike Bennett
PEEPEE POOPOO
Colin Jenison
Will Fowler
Aidan Peet
Matthew Renegar
Tommy Transplant
Aaron
Daniel Newman
Brian Wigton
Dave Speller
Elijah R Sell
Andrew Epperson
Jeffery A Fallon
Andrew Jeffries
Philip Honeycutt
Travis Blakely
Daniel Russell
Declan Fischer
Paul Messina
Joseph Lacroix
samuel ungeheier
Carlos A. Lizarraga R.
Chriz
Conor O’Doherty
James Populo
Ian Davies
Alex Trocker
Laramie Reg
Troy Thompson
JeffG
Sean Quigg
Dave Van Englehoven
Jamie Cucalon
Maro
Osel Rodrigues
David Anderson
Gerald Ringgold
Brian Brown
ChaoticDanny
Ron Clevenger
Matthew Burch
Victor A Estes
Ken Widmer
Trinel Earsery
Malakai Messina
Tobin Vesper
Jason Kreul
Richard Thursby
Zednic44
$10+ Patrons:
Adam West
Brandon Leafblad
Christopher Heath
john best
Nicholas
Peter Champlin
The Grapeman Reform
Marcus Warren
James Lamb
Koss Billingham
Drew Lawton
Jim Shepard
Mark Cockrell
William Herrera
Chris Thomason
John Morris
Patrick Emry
David Capp
Tim Chapin
Timothy Potter
Austin Hewlett
James Robers
Seth Johnson
James Shepard
Touch of Oops
Justin Setters
Jack Stow
Daniel Rota
Michael Fierro
Jeffery Maslan
Johnathan Simmonds
Wolfgang Widmer
James Campbell
Corey Muxlow
Casey Smalley
Tim Stephens
E
Matthew Caffell
Clint Walker
Drew
Al Philp
Robert Lewis
Jaden Bass
Rob Haag
Gregory Clark
JoshuaTroller
Josh Perez
Samuel Ungeheier
Billy Sullivan
Brandonlee
Thomas DeVries
Background music made by Jordan Rowan of iMakeMusic
Audiojungle: audiojungle.net/user/imakemusic

Опубликовано:

1 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 174

@tomassedlacek8202 Год назад

Man this CNC content coming from the channel is amazing! I remember watching you a few years ago and I've randomly found your channel again a couple of days ago. I see massive improvements and very interesting and informative content. Keep it up!

@pmdinaz Год назад

That's awesome Dan! Looking forward to your future! May it be bright and prosperous.

@eveningcharlatans9743 Год назад

Fine work Dan and an incredible machine you've put together. Glad to see you do what you're doing. Keep it up!

@realjester Год назад

Locking forward to your complete review of this CNC and the Avid router. Thanks for sharing 👍👍👍

@Phyoomz Год назад

I'm thrilled for you! Can't wait to see what you start making from this thing.

@ronhansen7717 Год назад

I just built the same CNC machine and I'm just getting it mounted properly and fine tuned. I love what I've seen so far and customer service is amazing. I highly recommend it and Sienci Labs. BTW, I also bought the Y axis dust shields. They keep the screw mechanism much cleaner.

@JoeTheGuitarGuy96 Год назад

Dan, you keep hitting out of park with these CNCs and what your doing with them, the results keep getting better.

@keithsmith9889 Год назад

That's awesome I'm so happy it's all coming together smooth

@mrfatbobrider1969 Год назад

Way to go ,Dan... Just as I get started I have a small injury to my shoulder and other places... But way cool with what your doing,I can't wait to get started ... Wishing you and your family all the best on your journey ✌😎👍

@Johnny.D Год назад

I own a longmill mk1 and I love it.

@andrewjeffries8721 Год назад

Thank you Dan for a channel that gives me some great ideas and inspiration! I have been thinking about making my own bass. It's a blessing to be able to learn from your experience. I appreciate you, sir.

@GunsandGuitars Год назад

Thank you!

@fstephani13 Год назад

Awesome machine and video! If you replace the router with a spindle you can get the chip loading just how you want it to preserve your bits longer and a spindle is way quieter. Thanks again for sharing!

@fredgonzalez6619 Год назад

Thanks for yet another cool and I sprint video man!!!

@vanshankguitars Год назад

Canadians are good for a few things after all right? I've seen their ads before and I never realized they were located in my own back yard! Definitely something I'll buy in the next year or so.

@GunsandGuitars Год назад

Can’t recommend it enough. Excellent machine, excellent community, excellent customer service, excellent price

@andrewgocken517 Год назад

@@GunsandGuitars " @edwardikechukwu" using you stuff, with no info on channel, offering prizes for Direct messaging. Thought you should know.

@CarlosKTCosta Год назад

Been loving the progress. I would really love a video on wood sourcing.

@MrGwg11 Год назад

Dude, You're living the Dream..... Can't wait to see things blossom! hopefully the automation process doesn't take too much of The Dan Craftsmanship feel away, cuz your hands lay a blessing on about everything you touch it seems... Keep on going Friend, you're a real inspiration.

@GunsandGuitars Год назад

Wow thanks for the encouragement!

@shelleywetzel7292 Год назад

Love the new table space!! Great price!

@steverees1936 10 месяцев назад

Hi Dan. Very interesting video and has given me ideas for my retirement in a few years. I have built kit guitars and this might have just given me the reason to take the next step into hobby guitar building. Thanks for sharing

@danlsmock Год назад

I have the 30x30 and it's a fantastic machine. Enjoy!

@bradc2905 Год назад

Man I’m so excited to see what you do with it. I watched your vid on the fox alien, it lit a fire with me, after a ton of research I got a onefinity on the way now.

@rtroiani Год назад

Good video. I use a Shapeoko XXL 33x33 which looks very similar to the tracks and and V wheels. Works great for guitar building. People look down on it, but hey, it just works without issues.

@ispearo Год назад

Great Advertisement! Keep up the Good Sales. 😀👍

@BBGuitars Год назад

Mega setup there! Id be using that to cnc a whole bunch of plywood cabinetry to deck out the whole shop and underside of the cnc table with storage.

@shakyblues2099 Год назад

Hi Dan Hope you're well. I just bought the last available Behemoth bass kit on your website! So excited. I've been wanting one of your custom basses for ages. Can't wait to get started on it. Will make a video when I've finished it to let you know how it turned out. Best wishes from the UK.

@GunsandGuitars Год назад

Awesome! I’ll have that kit shipped out for you this week!

@3dkev384 Год назад

Love the idea of using a desk as a CNC bench.

@thebreakingwinddialoguessh7801 Год назад

I also went with the long mill 48X30... the extra couple inches in the x and y was a pleasant surprise

@MrDaveKC Год назад

That's fascinating and looks like a fantastic machine. I'd be thrilled at this point with the Foxalien (and maybe I'll be able to get one of those eventually). That's really impressive, and should really get you to being able to truly "manufacture" these bodies. I really like this and what you're doing with this. Hopefully I can eventually get a CNC going, but it's definitely got to be something I can use to make money, too. Keep it up Dan!

@GunsandGuitars Год назад

You are correct on all accounts! A machine like this needs to make you money or else it’s not worth the cost and space it takes up. I’m still figuring out the most lucrative use of this machine, but at least in the meantime I can use it to make guitars I can sell

@1960fusion Год назад

Love the old Craftsman bandsaw...had one for many years!

@VedunianCraft Год назад

That's incredibly cool!!

@familyengineering5591 Год назад

Its crazy to see how far this channel has come along. I used to hate on you for shilling chinese junk but stuck around fir your gun content. Watching you evolve to have these new really cool ideas is awesome. Good job dan. This channel has become super interesting and informative.

@GunsandGuitars Год назад

I’m glad you came around…or I came around? Haha whatever it is, I’m glad we are onboard together now

@peterchamplin8767 Год назад

I like the x wing and Ty fighter on the dust collection 😁

@WaterN2WineCreations 9 месяцев назад

I just got a longmill CNC. I am thinking with the vortex rotary axis I could probably even make a gunstock… I bet it would do a guitar neck. I worked as a machinist and have a little experience using CNCs . I didn’t get the rotary axis, but I got the laser module they had. Looking forward to your complete review. Happy CNCing!

@moogoomoogoo5990 Год назад

So informative. Thanks.

@tmenet Год назад

Dan, I bought a longmill a few months ago for the same reason you did. I am cutting through Birch hardwood at 100 IP.M like it's butter. I bought G-wizard on sale for feeds and speeds. It comes up with numbers I would have never tried just make sure your hold downs are tight. Welcome to the longmill family!

@GunsandGuitars Год назад

That’s awesome! These LongMills are legit! Thanks for the tip I’m gonna look up those speeds and feeds. I’m not worried about breaking the cnc I’m worried about breaking the router bit! The cnc is more than strong enough

@tmenet Год назад

That program takes everything into consideration. Also 1/4 inch bits are much harder to break. What the heck is that surfacing bit you used? It looked huge!

@ronkunk144 Год назад

I like what you're doing here! I'm trying to decide if I should continue to build kits or to jump into a CNC. I programed and ran CNC milling machines for over 20 years so I'm not afraid of the challenge in that. It's just I'm retired and do I want to make a business of this. Yes, maybe, maybe not

@CarsInDimension Год назад

I think that in time you'll eventually replace the router head with a dedicated CNC spindle. While it may not go along with you're DIY, budget oriented ethos, it would probably speed up your cuts. The ability to use computer controlled Cartesian machines like 3D printers, CNC machines, and laser engraver/cutters has opened up a world of possibilities.

@bluesfool1 Год назад

Amazing tool

@darcyboyer2998 Год назад

Great video, thanks for posting. I'm in the final stages as to whether or not I want to complement my guitar building with a CNC and the Longmill Mk2 is where I've landed if I do. If I want to get a more serious and move beyond being just a hobbyist builder I would have to do some serious upgrades to the tools I have and I when I started to add up the costs it certainly started to cost justify a CNC. Living in Canada I quite like the idea that it is Canadian made. While the exchange rate works well for you it certainly works against me for any machines I'm looking for that come outside of Canada. Thanks for the tip on the Avid Power router, I'll take a look at going that route when the time comes. I'm curious as to what you use for bits.

@makertime6296 11 месяцев назад

Nice setup video! When might the full review video be coming?

@glennw3909 Год назад

Congrats on furthering your vision on your business! It’s been fun following your journey. What kind of guitars will you be building? Cheers!

@williambradford7748 11 месяцев назад

I use that same Avid Router. Interesting to know its a Makita clone. Makes sourcing parts easier now. And I felt it was way better performance then just some average knock off brand. Been impressed with it thus far 3 years into use on it.

@MarkGutierrez Год назад

Sweet machine Dan.🤖

@smesple Год назад

Great Video. CNC Machinist by trade but have been bitten by the guitar building bug. I have always wanted a hobby grade CNC and have thought of building one but this machine looks nice. I'm going to have to do some research. Thanks

@scarmyguitar Год назад

Whoo Doggy! I knew this day would come!!

@thseed7 Год назад

Great video, extra points for the 🕷 knife

@GunsandGuitars Год назад

Good eye 😉

@PuppetWood 6 месяцев назад

Nice. I love my LongMill.

@joepoole4922 Год назад

I build guitars the old fashioned way ,and makes feel so good.

@atebea5259 Год назад

wow... what A Dream to make sick guitars with this

@CraigHollabaugh Год назад

Yay, new machine!. Hey where did you get those short bristles for your custom dust shoe?

@abdultairu Год назад

I think you just made good a case for those Longmill guys, in mu honest opinion, I think they should pay you :) indeed. I am looking at this CNC myself now and will be making a decision soon. For space constrainits I am looking at the 30x30 which is alos within my budget. Thanks for sharing this video man!

@DaveParkersonofficial Год назад

I naught one because of this video and it is in shipping now.

@stephanematis Год назад

As a Canuck, I think I am sold. Finding enough space for the machine will be the challenge.

@JamieLamb Год назад

That thing is a beast!

@JamieLamb Год назад

@NiecgramMe@Guns and Guitar you're a waste of space. Too bad you can't spam me in person. Stay off this channel.

@Kyle7K Год назад

Just ordered mine. Getting the big one! Never used a CNC before so it's a bit scary spending the money but there's no reason I can't do this!

@GunsandGuitars Год назад

You’re gonna love it!

@stevegrimes5105 10 месяцев назад

Great video, thanks. Any more information on your dust collection?

@edgelite Год назад

So cool. I'm in the researching what to buy stage. I was looking at the Open builds Lead1010. I'm in Canada so for me this company you recommend is better for me also.

@GunsandGuitars Год назад

The LongMill is a way better deal than open builds for sure!

@warwickben Год назад

should look at getting a 2.2 water cooled spindle. your able to control rpm and cutting sound will be louder then the spindle.

@johnpeters211 Год назад

Mine comes tomorrow! I'd be interested to seeing what your feeds and speeds are for bits/woods.

@cybergnetwork588 2 месяца назад

Subscribed! Looking at the exact same CNC for the same type of project (guitar building).

@kenvh8569 Год назад

Consider the V1 Engineering LowRider v3?: Full 4x8" sheet ability, make it yourself for under $1k. I'll be embarking on my own LowRider build this spring specifically to make basses with some complicated geometry! (Albeit with belt drives and NEMA 17's.... but people get amazing accuracy and power - at the expense of speed.)

@davidpetersonharvey Год назад

My Canadian wife will want this.

@ultrakool Год назад

Dan would make the perfect neighbor. cool personality with mad skills. I could have my amp to 11 and I don't think he'd mind. lol j/k about the noise, but hey, we could jam and talk firearms, while I pick his brain about guitar building. Only thing is, I lived in AZ for six years and I don't think I could take another summer there😆

@mikeyuberalles Год назад

Looks like the custom shop is really coming along well for you. I'm happy for you, sir Any updates on the Behemoth prototypes from June?

@GunsandGuitars Год назад

I should be wrapping them up this month!

@mikeyuberalles Год назад

@@GunsandGuitars Hooray

@SienciLabs Год назад

That's one snazzy machine (y)

@PK22-b7v Год назад

Looks great !!! What CAD and CAM software are you using?

@jamescopeland5358 Год назад

Good video

@nephosl5292 7 месяцев назад

Hey GnG. Nice Machine! I´m also running a Makita Clone and curious what feedrate you drive with your machine to cut those bodys. I´m also starting to build a guitar soon.

@shirestudios Год назад

Very cool

@brevs8387 Год назад

That's awesome Dan! I am curious if you looked at the Inventables X-carve machine. It seems to be about the same size (if not bigger) and around the same cost. It's one I've been looking at for years and am now trying to understand the difference between yours and that one. Congrats 👏

@scarmyguitar Год назад

I use the Xcarve! I have 2 of them!

@GunsandGuitars Год назад

I almost bought an x-carve but I learned that I didn’t want to have a belt drive machine, that’s why I ultimate went with the LongMill. But @scarmyguitar uses an x-carve with great results!

@bzousel Год назад

Just subbed. I am looking at this for my 1st CNC as i want to start a small business as well starting off with signage and wall art then moving onto other various projects. Can you share a little more about your dust collection setup?

@GunsandGuitars Год назад

I’m using the long mill dust boot, it’s connected to a 4” hose going to an old dust collector I bought used on fb market place it works great!

@bzousel Год назад

@@GunsandGuitars Thanks!

@fitzymagee7469 Год назад

Ghost Gun next !!!

@HearGear Год назад

The CNC seem very cool and good, but hey, i think i mentioned this in another video of yours, you gotta upgrade to a 1,5KW water cooled spindle with VFD because it´s a huge upgrade and your machine is going to route so much better and faster, those Makitas and similar clones are not very good at the end of the day actually. I have exactly the same clone you have on this machine, it´s scrapped a long time ago, also i had a real Makita that worked out great for quite some time and then it broke. I can see in several of your videos that the material you are routing of is turning in to dust and/or tiny particles and that´s not an optimal working CNC and there is alot of things that can go wrong there. But you make great videos and this is very interesting, i think you gotta learn from your own mistakes hey.. keep it up. Cheers.. :D

@mritorto1 Год назад

do you have a video on how to use a cnc machine to build a guitar for beginners ?

@pec0309 Год назад

Hi Dan, did FoxAlien ever answered to you about the nema 17 motors for the Masuter Pro?

@shanefoster2861 Год назад

I never would have thought you would make it this far and resort to a CNC machine.

@GunsandGuitars Год назад

Only for the cookie cutter stuff. It’s still way more practical to make one off custom builds by hand

@Clockeman Год назад

How's it going so far...I was just looking at this CNC this morning for guitar making.

@peternotpeter Год назад

Nice upgrade Dan! Say, did you have a link for those angled headstock necks you've been importing for your builds? thx keep up the good work.

@GunsandGuitars Год назад

No link, I just get them from a seller on eBay.

@peternotpeter Год назад

@@GunsandGuitars Thanks Dan, I could not find any angled paddle headstock on Amazon or ebay..Anyhow, I'll keep searching. Nice stuff you're building!

@joeygregory695 Год назад

Hey man! Great work you're doing! I have been researching CNCs to purchase for taking my guitar builds next level and your videos have helped in my decision to go with the Longmill. For which I thank you! Would you clue me in on which one of the bit sets they offer is the ideal set to go with? Does the 3D Carver set have everything that I would need for guitar building, including fret slots? And are you just using the provided gSender software, or is there something else that's far superior but as easy that you may recommend? Again, thank you for what you do.

@GunsandGuitars Год назад

Hey Joey, congrats on choosing a LongMill! I love mine, and you will too. For bits I just have a 1/4” up cut, 1/4” ball nose, and a v bit. But I actually haven’t use the ball nose or v bit yet. My carves are really simple at the moment, I still have a lot of learning to do. I use their Gsender app, but I also use easel for my cad/cam. I’m trying to learn fusion360 but it’s a steep learning curve so I’m not their yet. I don’t think scieni sells a bit for fret slots, you’ll need to find one specifically for that from a luthier shop. I plan to use one of my cnc lasers to do the fret slotting. It’s a lot faster and easier and no chance of breaking those super fragile bits. Hope that helps!

@joeygregory695 Год назад

Hey! Cool, thanks for getting back to me. So most of the guitar carving is really simple for the machine with just using the basic bits, it would seem. And the laser doesn't burn the wood enough to be of any negative effect in the fretwork, I must ask? This is so amazing!

@QuebecoisSti Год назад

How do you ensure the pockets underneath the guitar are done at the good locations once you turn it over ? You make a square cut around the slab then reference about that one ?

@LargeFry1 7 месяцев назад

Nice job getting the Longmill. I made the same choice. Oh, and thanks for the Canada bashing, typical Yank doofus remark. (I know you will say you were joking, but ALL Y'ALL do it) love you.

@dennisperusse3837 Год назад

Great video, but a couple of questions. 1. Are you using limit switches or are you using software homing limits on it? 2. Have you thought about using your new machine for just guitar/bass bodies then using your original machine just for the routes where that has all been figured out? 3. Lastly, are you using the same cad/cam software on both Cnc machines and can you do a review on Easel?

@GunsandGuitars Год назад

Great questions! 1) not using limit/homing switches as of now because my work are is so large I don’t need them for my current projects. When I start doing more complicated carves with tool changes I’ll need to install the switches. 2) I am currently thinking of how I can use both machines to speed up production, I have a few ideas 3) I’m using easel for both machines currently. But it’s very limiting, I’ll need to learn a more powerful program eventually.

@dennisperusse3837 Год назад

@@GunsandGuitars Take a look at FreeCad. It’s open source, actually has a manual to it, and it being free is well with anyone’s budget. I just downloaded it and had Staples print me out a copy so I am unfamiliar yet with how good/ bad it is but food for thought for you. :)

@JakeHolder 5 месяцев назад

Do you still recommend the Masuter Pro? I have a shot at one with the bed extension and offline controller for 750. Curious if I should go that route or save for a month or so and get this guy!

@billieb 11 месяцев назад

I thought I was going to jump into cnc with a genmitsu but you may have changed my mind. One thing everyone seems to breeze over is dust control. What system did you get?

@eross21 Год назад

so fox alien has a ball screw style machine. i’m just curious as to why you didn’t consider that one? was it just to small? or other issues that kept you from considering that one? i’m just curious because i’m shopping for a cnc machine currently.

@anthonystoval9267 9 месяцев назад

Does this machine do variable depth cuts? For example if you wanted to build a strat style body, will it carve the belly cut and the forearm contour?

@fishburgerful Год назад

Great video. I’m just starting out. Are there any accessories you recommend buying with the Longmill CNC for guitar making such as the magnetic dust shoe and a router bit starter set?

@GunsandGuitars Год назад

Definitely get the dust shoe, and start with a 1/4” upcut but (long one, 3.5-4” with 2” cutting surface) so you can cut the full depth of a guitar body. You can add a 1/4” ball nose bit for finishing too if your 3d design skills can put it to good use.

@woodyoulove-reynaldguibone6890 Год назад

Can we upgrade the stepper motors of the Foxalien masuter pro?

@cybergnetwork588 2 месяца назад

Am I crazy or ou've raised the Longmill to be levelled with the wasteboard?

@esixx17 Год назад

What software do you need to run this? New to cnc research but I have a laser. Someone said lightburn works with cnc?

@Talnaus Год назад

Wish they had a 48x48

@GunsandGuitars Год назад

I bet they will someday soon honestly

@heythere6983 Год назад

So have you built guitars for anyone? Iv thought of this for years but don’t have the space . I started drawing up a guitar recently , are you able to take someone’s idea and try to make it ? I still have to measure but I have a fairly simple design in mind for a guitar body

@iwannaapple7190 Год назад

The lead screws that came with mine are crooked. They wobble.

@DaveParkersonofficial Год назад

What software do you use for your Longmill?

@johnrau2265 Год назад

Based on the visual similarities between the computer-controlled router and laser machines, is there a method of just swapping back and forth between the two? Or does it have to be two separate machines?

@GunsandGuitars Год назад

You can absolutely use them for both. Sienci Labs makes a laser for the LongMill, and Fox Alien makes a laser for the Masuter Pro as well.

@HyPex808-2 10 месяцев назад

Can you control the router through the software?

@thenoizfaktory Год назад

What are the dimensions of your work space that you will be working in with the CNC router?

@GunsandGuitars Год назад

34”x50” is the work area of the router

@russelldenton8753 Год назад

Do you do necks on these CNCs too? Wondering if programming for the fretboard radius fret slots is hard?

@GunsandGuitars Год назад

I haven’t done a neck, but I plan to. Programming and 3d modeling is the hardest part. But you can purchased 3d models to get started. So to answer your question, yes fretboard radius and fret slots are possible

@Lendley Год назад

I’m looking at buying a CNC I am interested in building wooden flags and military ribbons, most of those files are wrote for the vcarve or carbide is there a simple way to change the files to work with this machine? It may be a dumb question just new to it.

@GunsandGuitars Год назад

This machine is open source grbl, so you can use any software you want including both those you mentioned

@freaksarise Год назад

Hi. i was just going through options on their site and see the software area. For the large size it requires the pro version. Are you using that $650 software or an open source application? Seems like it makes sense to get the vacuum attachment for dust collection and other addons. Any knowledge with its laser? Im considering that as well. Thanks!

@GunsandGuitars Год назад

Right now I’m just using easel for the software, it’s free and user friendly. But I’m learning fusion 360 which is also free and much more power, but way less user friendly.

@guitartube5822 Год назад

How has this machine been doing since you made this? I have been making guitars for a few years and suddenly have the need to be able to make more. Been doing a ton of research and want to see what issues you’ve run into. Also what add ons have you need to purchase or recommend! Thanks!

@GunsandGuitars Год назад

I’ve had zero issues. This machine is an absolute beast, it has more than exceeded my expectations. I’ll be making a follow up video pretty soon.

@guitartube5822 Год назад

@@GunsandGuitars I have mine all configured in their cart… have just been waiting to do a little more research. Thanks so much for the response