Congrats on your first build, I have a suggestion though. I don't know why you flipped the bottom fans at the end but they are set as exhaust, you want the bottom fans ALWAYS set as intake and the top fans as exhaust or you'll intake a lot of dust from the top and going against covection, flip the top and bottom fans and you're good to go. If you did this for aesthetic reason lian li makes reverse flow fans, you can buy them.
@@playsolo713 The GPU pulls in air from the bottom as well, having the bottom as intake will keep the fans from fighting each other and creating extra noise.
Congrats on your 1st build. PC looks very nice & solid. 😁 good choices on the components for your 1st. Hopefully you will continue to expand on the build 👏👍
Nice vids thanks for sharing 😊 Just be sure that you put your fans in the right way ! Usually the air get in by the bottom and from the side and get out by the 3 fans on the top and from the fan next to your CPU Have fun gaming ✌️
0:57 bit late but honestly, you made the perfect mistake of choosing the 12th gen over anything newer considering their instability. Had a 14th gen myself and was I glad to get rid of it after a few months of use.
Oof the comment section can be mean sometimes lol You should definitely do the fan swap other comments have recommended! In from the bottom. And yes you could have spent that budget a little differently to get more gaming performance BUT what you built is a GREAT pc and you did an amazing job on the ascetics. I am hype for you!
Omgsh I loooove your build!! I’m about to build my first pc soon too and my uncle who is a tech guy got mad at me because I told him I didn’t care if white builds cost more lol 😂 It just looks so clean!!
your aio should be at the top, it causes damage to your pump because its on the same high a your cpu. Pump will fill with air bubbles. Your Aio should always be above the cpu hight.
Not the best radiator placement tho (cuz air bubble will be accumulate on the top part of radiator over time. But you got pipes there). You gotta atleast rotate it 180 degree. Placing it on the top would be the best. And i would argue that 3 intake fans vs 6 exhaust fans are not balanced.
Tubes from AIO should be at bottom, useless to use strimer for MB(you barely see any of it), just do it for graphic card only in this case. Nice build tho ;)
How small is your space? Lian Li mini is smaller than a full size case but still occupies some space. I added an extra drawer to the side of my desk to place the PC on.
My desk is 36 by 24 deep. Monitor is mounted tho. I love your build though it’s stunning. Also is it possible to see your whole setup? Also how did u get the bunny on your liquid cooler. Ughh I’m so impressed by this setup
With an extra drawer on the side, I think it's doable. Otherwise, the PC will take up too much space. I will try to show my setup in the future; still working on it. 😊 I got the bunny theme from the NZXT app, found under Sanrio. Thank you so much for liking my video ♥️
Hello! I cam across your video as I'm also using the same motherboard! Can I ask why you would need a USB hub? I'm a bit confused about that part and now I'm wondering if I need something similar as well XD. Ty and beautiful build!
Thank you! I needed a USB hub for the fans. Asus Mb only has one USB port, and we need an extra USB port for the fans. However, if you are going to use the Lian Li fans like I did, I recommend getting a hub from Lian Li (pw u2hb) rather than the one from NZXT. Fans won’t be recognized unless you connect them using the Lian Li hub and won't be able to control the fan speed and lights. Got myself a new Lian Li hub for that issue. I heard that the issue only comes with the Asus Mb. ☺️
Bro had a 1900$ budget, could’ve gotten a 4080 super (1000$) and gotten a good cpu like the 7 7800 ($350) u just got SCAMMED🗿 btw the 4060 is entry level and 4080 is high end you gotta be kiddin me💀 anyways good video!
I’m pretty sure it will still be a great PC. I regretted first not going for DDR 5 and 13th generation, but my pc runs great and I have zero regret for going with my budget! Also, you can always upgrade later 💕
Good build, the 4060 makes it bad tho lol that card is horrible for gaming and is only good for power efficiency...If I were u I would downgrade to a 3060 or just upgrade to a 4070 overall nice white build it looks clean.
@@ashandcaI4060 is the gpu or graphics card, the comment is correct, the 4060 isn’t great for the price. DDR5 is ram, ram is temporary memory, the difference between ddr4 and 5 are the clock speeds, ddr5 is newer and faster and also is supported by the motherboard in the video however they decided to go with ddr4 for whatever reason
With all due respect, but this build is some solid garbo, not only are you stuck on a dead platform, you also Picked a bad motherboard Picked a horribly overpriced GPU Overpriced SSD Bad cooler 0/10 try harder
this is clearly their first build... maybe instead of shitting on the entire thing and offering ZERO feedback other than things are shit, offer better alternatives next time. be kind, doesn't take much. :)
i’m so tired rn i don’t even wanna talk.. but for fucks sake. you put 9 fans as exhaust and 0 as intake… you’re not even taking air into the pc, you’re just pushing air out which doesn’t even exist… i was gonna say “finally a girl that knows how to build pc’s…” or did i? also, a 4060? the worst graphics card for the price EVER? you could’ve paid 200$ more and gotten a 4070 which you EASILY could get outta those 2 fans u bought for the AIO while you could’ve just used the NZXT ones AND the lian li strimers… also, you put the aio in a wrong direction, you’re basically pushing the water into the fans, not into the aio aka into the cpu, so good luck with the overheating of ur 12th gen i7, whereas you could’ve paid 40$ more and gotten the 13th gen, it runs faster, it has future upgrade options, and it’s better than the 12th gen i9. about 13% better than the i9-12th, about 35% PERCENT better than the i7-12th. if you put the AIO on the top, you could’ve placed the pump on the bottom, but you put it on the right, which means the pump must ALSO be on the right… don’t even get me on the strimmers.. you bought the 24 pin which is more into the back rather than buying one for the gpu which you can atleast see…
by that i mean you don’t have to take the pump off, leave it just like it is and mount the 240mm fans on the top, you can then take the top fams and put them on the right and one on the left because the 240mm has to be on the right so you still have room for another fan on the left (on the top)@@playsolo713
