Тёмный

Building My New Favorite HD Toothpick with Shark Byte Digital FPV (Ultra Low Fixed Latency) 

Mr ShutterBug
Подписаться 18 тыс.
Просмотров 41 тыс.
50% 1

How good is the Shark Byte digital FPV system for backyard freestyle? I'm about to find out! SPOILER: It's AWESOME! Click "Show More" for links and additional information.
You can also follow me on Instagram to see what I'm up to. I post pretty often these day:
/ mrshutterbug
Want to help support this channel? Simply bookmark any of these links and use them when you shop for FPV gear. Each time you make a purchase, they will give me a small commission. It is totally free for you and it helps me get parts for future projects. Thanks!
Banggood: bit.ly/2OVcf1r
BETAFPV: bit.ly/betafpv-shutterbug
GetFPV: bit.ly/2Ot4q2K
Heli-Nation: bit.ly/heli-nation
Related Videos You Might Enjoy:
- My DJI "Digitooth" build: • DJI Digital FPV on a 3...
- My review of the Happymodel Crux 3: • Crux3 + Insta360 GO | ...
- My 33 gram 1S Babytooth build: • Building the World's L...
- My 19 gram 1S "NanoBug": • How I Converted My Nan...
- How to fix the motor direction and mapping when mounting the FC in a different orientation: • How to Mount Your FC i...
Getting Started with Shark Byte:
- Any FPV goggles or display with HDMI input. I have Fat Shark HDO2.
- FatShark Shark Byte RX5.1 Receiver Module: bit.ly/3acLQ9O
- Two SMA antennas of your choice to go on top of the RX. They should be RHCP to match the patch antennas that are built-in.
Parts I Recommend (not exactly what I used):
- Shark Byte TX5S.1 single board digital VTX: bit.ly/2PW8eNR
- Runcam Nano HD Camera: bit.ly/3e1GgIp
or Foxeer Digisight V2 (I have not used it, but it is another option): bit.ly/32iNcLD
- 55mm MIPI Cable (shorter than the one that comes with the camera): bit.ly/3uR8Rqv
- FPVCycle Babytooth 3" Frame (2mm thick version): bit.ly/2Q3zEBi
- FPVCycle 13mm 7700KV Motors (if you can find them in stock): bit.ly/2XWcOvQ
OR Happymodel 1202.5 6400KV Motors (what I used here): bit.ly/3wZFdkG
OR other motor with similar size and KV.
- BetaFPV 12A F405 Whoop AIO. It is light and has good features. It also has motor plugs, which you could use or remove: bit.ly/3acAjr5
OR BetaFPV 20A F405 Toothpick AIO for an even easier and more robust build: bit.ly/3mPbiqR
- Gemfan 3018 2-blade props (1.5mm shaft or 2mm shaft depending on your motors): bit.ly/2T9KkNW
or Gemfan 3016 3-blade props (these fly smoother, but they have less power for pulling out of dives): bit.ly/36REC7a
- RHCP Singularity Antenna with U.FL (I recommend not using the "short" one. It is harder to get a good antenna placement): bit.ly/3uMgi2e
- Crossfire Nano Receiver (or receiver of your choice): bit.ly/3mO7ZAa
- Crossfire Minimoral T V2 Antenna (or whatever goes with your receiver): bit.ly/3dhfmx0
- Velcro Cable Ties for battery strap: www.amazon.com/dp/B001E1Y5O6
- Cloth Tape: www.amazon.com/gp/product/B01...
- M2 x 4mm motor screws (titanium or steel)
- M2 x 15mm stack screws (titanium or steel)
- Thin foam battery pad helps it stay put:
Flight Times:
The main flight in this video used a GNB 300mah 80C 2S Battery. When flying fast hard freestyle like this I typically get:
- 300mAh 2S = 3 minutes
- 450mAh 2S = 4-5 minutes
- 550mAh 2S = 5 minutes+
Canopy STL Files:
www.thingiverse.com/thing:482...
Betaflight 4.2.8 Tune:
set gyro_lowpass2_hz = 375
set dyn_lpf_gyro_min_hz = 300
set dyn_lpf_gyro_max_hz = 750
set dshot_idle_value = 700
set dshot_bidir = ON
set motor_pwm_protocol = DSHOT300
set motor_poles = 12
set yaw_motors_reversed = ON
set pid_process_denom = 4
profile 0
set dyn_lpf_dterm_min_hz = 105
set dyn_lpf_dterm_max_hz = 255
set dyn_lpf_dterm_curve_expo = 7
set dterm_lowpass2_hz = 225
set vbat_pid_gain = ON
set iterm_relax_cutoff = 20
set yaw_lowpass_hz = 100
set throttle_boost = 7
set throttle_boost_cutoff = 25
set p_pitch = 55
set d_pitch = 39
set f_pitch = 124
set p_roll = 50
set d_roll = 36
set f_roll = 117
set p_yaw = 54
set f_yaw = 117
set d_min_roll = 0
set d_min_pitch = 0
set ff_spike_limit = 70
set ff_smooth_factor = 20
Bluejay ESC Tune:
- PWM = 24kHz
- Startup Power = 1061 min, 1243 max (equivalent to a single value of 1.25 in BLHeli_S)
- Motor Timing = Medium High
Music:
- "Funny Stories" by Roman Senyk Music (licensed)
- "Action Trailer" by Roman Senyk Music (licensed)
- "Burlesque Heartache" by RKVC (RU-vid audio library)

Опубликовано:

 

14 апр 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 232   
@patrickfontenot8953
@patrickfontenot8953 3 года назад
The smile one your face when you crashed at 22:35 say all about FPV. Pure. Enjoyment.
@bobkabab5550
@bobkabab5550 3 года назад
That is the cleanest looking tiny HD quad I could ever imagine. Incredible work.
@keylitho
@keylitho 3 года назад
Thanks for the crash footage... It's nice to know your human.. 😊😊
@marcosrossetti1582
@marcosrossetti1582 3 года назад
Exactly my thoughts
@jrrmos
@jrrmos 3 года назад
HAHAHAHA.. Nice...
@Clif_Brown
@Clif_Brown 3 года назад
Nobody rips a back yard like Mr. Shutterbug! Awesome video and interesting info on SharkByte.
@NWbirdseyeview
@NWbirdseyeview 3 года назад
Very cool. This needs to be a bnf.
@RichMoore-tweakin7376
@RichMoore-tweakin7376 3 года назад
Why is it every time you post a video I want to start butchering my quads 🤣
@maceliusfpv370
@maceliusfpv370 3 года назад
IT never ends lol. I want SB so bad, and i'm still building a mini lr and switching to elrs.. Sometimes you just have to say no to more upgrades and bench time and enjoy what you've got for a while.
@Cre8ionz.
@Cre8ionz. 2 года назад
4:49 min - FC AIO with inbuld VTX doesn't support Pit mode. But there's a solder jumper to disable the VTX completely.
@look2christ777
@look2christ777 3 года назад
Wow amazing flying!!
@maelradec6766
@maelradec6766 3 года назад
Outstanding work
@jodyking7278
@jodyking7278 3 года назад
Fantastic video and build. Thanks fo sharing!
@kydawg1684
@kydawg1684 3 года назад
Great stuff. Love your builds.
@gingerdude94
@gingerdude94 2 года назад
Your flying is inspiring, simply epic
@doncunningham3124
@doncunningham3124 3 года назад
As always, I am humbled yet very inspired. Thank you for another awesome video!
@rolosaenz
@rolosaenz 3 года назад
wow !! those freestyle chops are awesome !!! thanks for sharing the build and your fly footage :) i Dig it !!!
@TheCarl1206
@TheCarl1206 3 года назад
Very nice video. Thanks for sharing.
@valden
@valden 3 года назад
Seeing you fly in that narrow back yard with those tall trees really gives me inspiration since I have a relative small yard too. Cheers from another cramped backyard flyer. lol.
@sixtofive
@sixtofive 3 года назад
That's a really impressive build!
@baverona
@baverona 2 года назад
That thing is awesome!!
@elfkind5590
@elfkind5590 3 года назад
Really really well done. All of my questions were answered about SB. Outstanding video!
@elxero2189
@elxero2189 3 года назад
Thanks nice review
@erickiandee4845
@erickiandee4845 3 года назад
Beautiful fly bro...
@rdoc7818
@rdoc7818 3 года назад
Love your vids! You, Nick Burns, and of course Bardwell really got me into the hobby a year ago and I’m so happy I found you all. Keep it up and I look forward to your next video!
@jimmycarr3400
@jimmycarr3400 3 года назад
Sweet got me thinking now.
@nerdlands6595
@nerdlands6595 3 года назад
Thanks for the thoughtful clarity of your presentation, especially the detail in the description. The crashes were valuable to see as well, it didn't really seem like any were due to breakup/lag or SharkByte issues. It's also really nice to see an reasonable (believable) advocation for SharkByte maybe not vs. DJI, but perhaps as a sometime alternate. Great, as always - cheers!
@FL_Engineer
@FL_Engineer 3 года назад
You have some fine soldering skills.
@TitanFPV
@TitanFPV 3 года назад
I had already planned a similar build when you dropped your Digitooth video, but now I definitely have to build something similar. Thanks so much for sharing!
@trajanfpv
@trajanfpv 3 года назад
Nice flying Nate, great crash reel as well. I am still on the fence on Shark Byte vs DJI. I look forward to more content on this system from you.
@sesameskeet03
@sesameskeet03 3 года назад
Dang, you read my mind, and were a step ahead of me. I literally have the sharkbyte system on my desk with a baby tooth frame. I was having trouble finding a good canopy though and only found 1 reasonable one on thiniverse. Thank you for doing this, great build! You saved me a lot of headache.
@Switch180fpv
@Switch180fpv 3 года назад
Cool build vid thanks
@chrismillersrcfamily
@chrismillersrcfamily 3 года назад
Awesome build and quad. I like to call it the Douglas Dive🤩
@robbiestoehr
@robbiestoehr 3 года назад
Great video! Love the crash real, you are a meer mortal 😉
@z506fpv5
@z506fpv5 3 года назад
Great video as always!
@RCinginSC
@RCinginSC 3 года назад
Excellent build. I have several babytooth builds , both 1S and 2S. This is definitely doable. Thanks for sharing.
@dennychannel1723
@dennychannel1723 3 года назад
Good job😀😀😀
@battano
@battano 3 года назад
I digg it. One of these days I just may make the leap to digital.
@phillipneyman9338
@phillipneyman9338 3 года назад
wow. you are a monster. your throttle control is insane....
@JonoRob
@JonoRob 3 года назад
I really enjoyed watching that
@philthayer4087
@philthayer4087 2 года назад
Nice! Man those trees look qwad hungry!
@sunsetpark_fpv
@sunsetpark_fpv Год назад
Holy shit @ 22:49 I thought you were going to fly into your face! Thank you for including the crash reel 😎 I NEED THIS TINY BEAST IN MY "FLEET"
@bkmahaffey
@bkmahaffey 3 года назад
LOVE the crash clips.....makes me feel normal....lol!
@JEMTAC
@JEMTAC 3 года назад
great vid
@Perforator2000
@Perforator2000 3 года назад
Very cool. I rebuilt an X-Knight 4" toothpick with the JHEMCU 35 amp AIO and added the Shark Byte whoop board to it. It went from being a defunct racing quad in the closet to one of my new favorite things to fly.
@SeeFPv-qm6ie
@SeeFPv-qm6ie 3 года назад
nice little ripper
@madprops526
@madprops526 3 года назад
Wow that thing really rips and you can really rip man! 👍
@Pirxfpv
@Pirxfpv 3 года назад
You not only can build but also smash those sticks hard. Good job. I'm subscribing
@DJDevine
@DJDevine 2 года назад
Love your channel, builds and skill... great stuff! I made a 1s whoop 75mm my and a 1s little devil 2.5” 50g mobula6 board canopy camera even the 1102 8700kv it was amazing! But the 40g 25000kv Motors bi bladed props and 450hv GnBs makes the whoop a little ripper! And it’s tough as nails! I’m also using XT30 connectors it’s what I had and they give you everything always! Cheers
@h2o-fpv623
@h2o-fpv623 3 года назад
Great video thank u
@kaasovic
@kaasovic 3 года назад
Nice flight and build. We’re doing a 3s on the 95x frame.
@boomboomtradingroom9646
@boomboomtradingroom9646 3 года назад
I hope some company copies your idea here and makes this a BNF.... 2S is kind of as big as I ever really want to go and at HD levels.... sign me up! Looks good man, love all your ideas
@nocknock4832
@nocknock4832 3 года назад
Crazy!
@RCRitterFPV
@RCRitterFPV 3 года назад
I mean... I don't think I'm getting into sharkbyte just yet... but love watching you work. and the results looks damn nice
@fpvnycdream_4197
@fpvnycdream_4197 3 года назад
Wow man that’s awsome!! 🔥🤩
@nistax2880
@nistax2880 3 года назад
14:09 you can flip it with stick comands too in the camera menu
@ggwbrc
@ggwbrc 3 года назад
Nice video dude👍
@inCarsoNatedFPV
@inCarsoNatedFPV 3 года назад
Great video. Super informative! Damn I wish I could solder like you!
@deva3097
@deva3097 2 года назад
Actully you are great....give optional board both are great....thanku ...so moch...
@andreard267
@andreard267 3 года назад
Nice
@luis_gbs
@luis_gbs 3 года назад
Also I really like the HQ T3X 1,5 x3 3015 on my crux3, just a tipp
@bobbymiller9098
@bobbymiller9098 2 года назад
Best channel on youtube
@3DMOFO2020
@3DMOFO2020 3 года назад
Another awesome build Nate I haven't tried digital FPV yet in either DJI or shark byte so I can't really say which one is better?
@whileistillcan9338
@whileistillcan9338 3 года назад
Looks amazing to me. I have only analog
@xxfoobarxx
@xxfoobarxx 3 года назад
Love your videos. Not just for the great ideas, the builds, and all the learning, but you're also a really skilled pilot! Love your flying style. Looking forward to more. Would love to see a more in-depth Sharkbyte review once you've had some time to test it thoroughly. Can you tell a difference between the 13mm motors on your DJI digitooth and the 1202.5 on this build?
@MrShutterBug
@MrShutterBug 3 года назад
It’s hard to say. In theory the larger motors should help, but my 13mm motors are on the DJI build which is also heavier, so not a direct comparison.
@flipfpv
@flipfpv 3 года назад
Really cool build! You make some great points about the shark byte system. I'm all in on DJI right now but have been considering shark byte for racing at least, unless DJI is able to fix the latency issue. The weight is another plus for shark byte. I do hate fatshark as a company though lol. Plenty of reasons to hate on DJI too I guess. Whatever, I'm just happy to have HD FPV.
@jackmaddox4960
@jackmaddox4960 3 года назад
It is really refreshing to hear a reviewer who's impartial about the DJI/Shark Byte thing; they're different, they perform best in different situations/styles/quads, one is not better than the other, I believe, they just do different things, and both do them well. I'm partial to Fat Shark simply because I don't like the way DJI doesn't really play with others, and Fat Shark has been a big part of, and supporter of, the FPV community from the very beginning, and even tho it took them many, many years to put a stupid power button on their goggles, I still appreciate their involvement with the hobby, as opposed to DJI... But again, just my two cents... Anyway, LOVE the build, I'm building something similar, as far as size/weight goes, but with different components... If it flies halfway as good as this one, I'll be thrilled! Excellent work, thank you for showing us your process of designing & building!
@dominicklittle9828
@dominicklittle9828 3 года назад
Just saw you made it on bardwell!!! Super awesome, I had already seen your video so when I saw him pick it up I thought it was gunna be you and it was! Super cool can’t wait to see his review!!
@MrShutterBug
@MrShutterBug 3 года назад
Thanks. I’m looking forward to it too! He will be comparing it to a 3” naked vista build, so that should be interesting.
@sketchpv3080
@sketchpv3080 3 года назад
Great work as always! I’m really liking DJI FPV but Shark Byte has it beat when it comes to whoops and toothpicks because of it’s size and weight advantage.
@drechenlard6491
@drechenlard6491 2 года назад
amazing. i wish id be that talented to build one of these 🤣
@no-trick-pony
@no-trick-pony 3 года назад
Thanks for the tutiorial - I just wish somebody would produce a decent cam for the Sharkbyte system, the Foxeer cam is also a let-down.
@luccamacas7386
@luccamacas7386 3 года назад
love your vids dude :)
@jermadjesty
@jermadjesty 3 года назад
Really curious what your thoughts are on that new AIO fc with the USB port connected via wires (I think it's diatone). Wondering if you just desoldered the wires after initial setup, how much weight savings you could get over a traditional AIO - would love to see one of your ultralight build videos like that
@Fpvfreaky
@Fpvfreaky 3 года назад
Sorry to hear it burnt a esc but what a cool little build thanks for posting man.👍🏽😉🍻
@MsStevieWoo
@MsStevieWoo 3 года назад
I'd building some similar picks but using the crazy F411 pro aio fc........ should have a look at those for this kind of project ;)
@LucilaValencia728
@LucilaValencia728 3 года назад
I always enjoy you're content! Are you doing a review about the tks frame?
@MrShutterBug
@MrShutterBug 3 года назад
No. I don’t have that one.
@LucilaValencia728
@LucilaValencia728 3 года назад
I'm hoping that you're gonna review it
@fol972
@fol972 3 года назад
if you change your lens for the one of the baby ratel you pass under is 50g easy
@gozillasin9934
@gozillasin9934 3 года назад
Interesting. I am more than glad if you can upload RAW fatshark DVR file somewhere and share it with us. Thank u for all.
@MrShutterBug
@MrShutterBug 3 года назад
Here's a 1 minute clip. It was compressed by the DVR in my Shark Byte receive, but it has not been recompressed after that. I simply trimmed it using ffmpeg (fast and lossless). You will see that there are little squares of interference quite often. I later discovered that my small 100uF capacitor was at least partly to blame. I switched to a 220uF capacitor and now I get less of that breakup. Fat Shark recommends a 330uF capacitor (it comes with the VTX) but I decided that was too big for this particular build. Cheers! drive.google.com/file/d/1X1JlsulwT616VH8edMj2nM1-wGCZ6fuu/view?usp=sharing
@gozillasin9934
@gozillasin9934 3 года назад
@@MrShutterBug WOw! Thank you Mr ShutterBug I am so happy to watch this and that I have got reply from you. Happy weekend!!!
@kevinsmith6433
@kevinsmith6433 3 года назад
I found with the tx5s I get about 1k on 200 mw have been playing with antenna s seems to improve picture also the updates make a big difference I'v seen some interesting video's on changing lenses there is a new tx5r race tx coming shark byte keeps getting better I'm running it on 3in and 4in will look at trying to fit it on my 120 after seeing this video
@MrShutterBug
@MrShutterBug 3 года назад
I do plan on changing lenses. I hear the Baby Ratel lens is good for that.
@timn4481
@timn4481 3 года назад
id love to see a truly engineered whoop build. one that takes an initial flight time and thrust to weight ratio, and then selects the components to meet those requirements. prop selection, motor kv, FC board v and i rating. etc. eCalc is a tool i havent seen mentioned by any YT drone content developers yet its been a mainstay for fixed wing and heli builders for year..and has a fantastic drone design feature. for racing, the tool allows you to predict top speed and acceleration from the setup you choose. we used to use it for pylon racing and it was more than once used to win RC fixed win events..almost everyone else was just guessing and relying on subjective testing..which becomes expensive.
@fabiofpv1195
@fabiofpv1195 3 года назад
Sorry: The previous post is when I really get into it. But I really want to thanks you for your sharing. I think I built my best quad. Thanks!
@meh-87
@meh-87 3 года назад
I fly in a tight backyard too and I've been enjoying the analog crux3. This is the first video that really got me thinking about Shark Byte. Unfortunately since I have the old Dominator HD2 I would need to replace those too or deal with less than full resolution. Hopefully even lighter stuff comes out and fatshark can find a niche in micros.
@achuvikov
@achuvikov 3 года назад
I am in the similar boat, I do have HD3 though(but with the same resolution). I feel like having 720p resolution is probably not as important because I don't think sharkbyte's video is truly 720p, it just not as sharp as it should be and noticeably worse than DJI FPV system which I think is 720p. I suspect internally it's less and just upscaled to 720p. I did the experiment and made a video where I fly using phone camera and played back it in my HD3. It looked much more detailed than what I saw with sharkbyte recordings. So I feel like the video most likely would be limited by sharkbyte system rather than goggles resolution unless you go lower to like non-HD Dominators which are 480p
@teurisleonardo8229
@teurisleonardo8229 3 года назад
Que bien ese dron que motores tienes ??
@cs-xd9gy
@cs-xd9gy 3 года назад
Bug, just order some Sanchez frames from CNC madness. No need to cut off the 4th FC hole because there isn't one.
@WindjumbieFPV
@WindjumbieFPV 3 года назад
That’s sick #islandfpv 👊🏽
@Zlowmoo
@Zlowmoo 3 года назад
Lost a fet on my crux 3 board when I hit a bamboo leaf with the front left prop.Flew like 7 packs and died from that.I'm waiting on a flywoo aio to replace it hoping 13A holds up better.
@luis_gbs
@luis_gbs 3 года назад
Nice one! In the crux video you said there is a way to change the little coppter antenna to a real dipol (u.fl) , could you explain that a little better or maybe even do a video on it? Thx
@MrShutterBug
@MrShutterBug 3 года назад
I’ve gotten a lot of requests for that. Maybe I’ll show it on a different build. I use antenna extension cables and cut them to length. It’s a coax cable. The outer mesh goes to ground. The inner wire goes to the antenna pad on the FC. Then you just have to strip away the mesh on the other end to expose the active part of the antenna. 12.92mm of the inner wire should be exposed with no mesh around it. That’s 1/4 wavelength at 5.8GHz. Hope that helps.
@luis_gbs
@luis_gbs 3 года назад
@@MrShutterBug Thx for the reply, now I know a little better what to do. If it fits into a video build some time that would be nice, but with that info I may try it once on my own ;^D
@guufpv2471
@guufpv2471 2 года назад
Planning to build one. Is Geprc 12A aio board able to support 3s battery? Planning to build 3s toothpick.
@dcvshambhu
@dcvshambhu 3 года назад
Nice video ...I was hoping lightest sharkbyte whoop ...
@MrShutterBug
@MrShutterBug 3 года назад
I already ordered two more Shark Byte VTXs. This won’t be my last SB build for sure. 😉
@jcfpv3454
@jcfpv3454 3 года назад
I would love to see you Compare it to a decased caddx vista hd to hd heads up 👍
@MrShutterBug
@MrShutterBug 3 года назад
Joshua Bardwell is borrowing my Shark Byte build. He already released a video about his latest decased Vista 3" build. He will be showing my build soon, so I imagine he'll be sharing some of his perspective on the tradeoffs. Should be interesting!
@jcfpv3454
@jcfpv3454 3 года назад
Not going down that road again lost over $600. I'll stick to my dji goggles, once caddx releases a naked vista without voiding the warranty it's over for the others. Thanks for the great videos though
@user-tz3cc2oc4x
@user-tz3cc2oc4x 3 года назад
Hi shutterbug, I've a little recommendation that could be useful for you, the form I desolder the connectors is connecting a motor to it, soldering the 3 pins and let the motor be on the air, with nothing under it, and then overheat the solder, it comes off in just a few seconds!
@MrShutterBug
@MrShutterBug 3 года назад
Nice!
@hannesju3315
@hannesju3315 3 года назад
Is there much of a difference in mounting the battery sideways instead of straight? Havn‘t tried it yet but my batterys are all rotated by 90° to yours
@fabianisensee3744
@fabianisensee3744 3 года назад
that camera mount is fantastic! It would be even better if there were several angle options availabe. Unfortunately I am completely hopeless in these types of programs. Would you mind providing additional stl files for different camera angles (up to 45 deg ideally ^^)
@MrShutterBug
@MrShutterBug 3 года назад
Good timing! I just uploaded them! Link in the video description. Now in 30, 35, 40, and 45 deg. I also shaved a bit of material off the back to make them lighter (fraction of a gram). Let me know what you think!
@richardmcguigan1382
@richardmcguigan1382 2 года назад
ive only flown dji drones my smallest one is the iflight 75mm i find it heavy. I am really contemplating going shark bite or just straight analog. but i hate to have to get goggles and radio. im really deep into dji already and i only been in the hobby about a year. its addicting and i just have one of those personality's
@MrShutterBug
@MrShutterBug 2 года назад
You'll need different goggles to fly HDZero, but if you decide to try analog, then you could make it work with the AV-in jack on your DJI goggles. I know several people who do that.
@lazyfpv7005
@lazyfpv7005 3 года назад
Hey, really awesome work but i was expecting a resin printed canopy cos that would have been perfect? Tpu is very good because it wont break but mixing resins like flex100 or strong-x could make it as though with the benefits of reduced weight and beatiful canopy. Its only $250 for the printer (elegoo mars) but i guess total could go up to $700 but you would love the 0.05x0.05x0.05mm accuracy.
@MrShutterBug
@MrShutterBug 3 года назад
That sounds amazing, but it's kind of a lot to spend for the small number of parts that I end up printing.
@lazyfpv7005
@lazyfpv7005 3 года назад
@@MrShutterBug You are right about the spending but are you sure you wont find a way around that? aaand its gone.
@maceliusfpv370
@maceliusfpv370 3 года назад
Sweet. Sooo, you gonna call this one SharkTooth or what? Not in to the fireplace! LOL. I flew my whoop in to the lit fireplace this winter, thankfully the fire was almost out and it landed in the corner, but it was the quickest I've moved in a while.
@MrShutterBug
@MrShutterBug 3 года назад
I should have! Haha! 👍
@tonhabraken9339
@tonhabraken9339 3 года назад
Awesome. Time to put tracer on it?
@MrShutterBug
@MrShutterBug 3 года назад
It don’t have tracer, but I do have some ELRS receivers on order. 😁
@SeeFPv-qm6ie
@SeeFPv-qm6ie 2 года назад
I want one 😫
@MadDragon75
@MadDragon75 3 года назад
I was just looking in my wallet thinking about Shark Bite.😉👍
@Bigbeardfpv
@Bigbeardfpv 3 года назад
do you feel the same confidence flying in scraggle and trees with sharkbyte as you do with DJI?
@MrShutterBug
@MrShutterBug 3 года назад
It’s too early for me to say for sure. In general, I think the DJI system helps me resolve finer details including scraggle, but only when the DJI signal is strong. When it gets weaker, the DJI image gets blurry. The shark byte image never gets blurry, it just gets a bunch of garbage on screen. I’m pretty good at looking past that interference (probably from my long familiarity with analog static) so I can usually still make out what I need to see. So DJI has a sharper clearer image most of the time, but I have not yet had any actual problems running into things that I couldn’t see with SB. Hope that helps. Cheers!
@BatanShorts
@BatanShorts 2 года назад
Can you review the uruav uz80, I heard it's a really good 1s toothpick under 20 grams
@MrShutterBug
@MrShutterBug 2 года назад
I don't actually do very many reviews. My time is limited and I prefer to work on other things most of the time. So, I don't plan to review the UZ80, but it is almost the same as my build which I showed in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dKAU1N68UOE.html
@BatanShorts
@BatanShorts 2 года назад
@@MrShutterBug alright, thanks for responding
Далее
The World's Lightest 75mm Whoop is AMAZING!
22:58
Просмотров 182 тыс.
Best 3" FPV toothpick: DJI vs. Shark Byte vs. Analog?
23:35
HDZero Digital FPV -  Complete Setup Guide
25:58
Просмотров 21 тыс.
Toothpick 3 Intro - TP3
12:05
Просмотров 52 тыс.
DJI Digital FPV on a 3-inch Babytooth Drone! Cool!
16:58
HD Toothpick FPV drone build || Flight test
25:14
Просмотров 9 тыс.
HDZero VRX vs Shark Byte VRX
11:08
Просмотров 12 тыс.