Тёмный

Building review: Hobby Boss Schneider CA in 1/35 scale Part I 

Hamilkar Barkas
Подписаться 38 тыс.
Просмотров 14 тыс.
50% 1

Please activate the English subtitles if you do not understand German.
Ich habe schon einige Bauberichte in der Vergangenheit gemacht, aber bisher keinen zum Thema "Erster Weltkrieg". Da war mir das 100-Jährige Debut des Schneider CA Panzers ein willkommener Anlass!
Der Hobby Boss Bausatz ist relativ einfach zu bauen, nur die beweglichen Einzelgliederketten sind eine Herausforderung.
Wie man ein paar fehlende Details ergänzt zeige ich euch in diesem Video.
Part I:
• Building review: Hobby...
Part II:
• Building review: Hobby...
Part III:
• Building review: Hobby...
Part IV:
• Building review: Hobby...
Patreon:
/ hamilkarbarkas
-------------------------------------------------------------------------------------------------------------------------------
I have done a few building reviews in the past already, but never one about the First World War subject. The centenary of the combat debut of the Schneider CA tank was a good opportunity to change that!
The Hobby Boss kit is pretty easy to build, only the workable individual track links are a challenge. How you add a few missing details to the model will be shown in the video.
Part I:
• Building review: Hobby...
Part II:
• Building review: Hobby...
Part III:
• Building review: Hobby...
Part IV:
• Building review: Hobby...
Patreon:
/ hamilkarbarkas
--------------------------------------------------------------------------------------------------------------------
The Schneider CA 1 (originally named the Schneider CA) was the first French tank, developed during the First World War.
The Schneider was inspired by the need to overcome the stalemate of trench warfare which on the Western Front prevailed during most of the Great War. It was designed specifically to open passages for the infantry through barbed wire and then to suppress German machine gun nests. After a first concept by Jacques Quellennec devised in November 1914, the type was developed from May 1915 onwards by engineer Eugène Brillié, paralleling British development of tanks the same year. Colonel Jean Baptiste Eugène Estienne in December 1915 began to urge for the formation of French armoured units, leading to an order in February 1916 for four hundred Schneider CA tanks, which were manufactured by SOMUA, a subsidiary of Schneider located in a suburb of Paris, between September 1916 and August 1918.
Like most early tanks, the Schneider was built like a simple armoured box, without compartmentalisation of the inner space. It lacked a turret, with the main armament, a short 75 mm cannon, in a sponson on the right side. By later standards it would therefore have been an assault gun instead of a tank. The vehicle was considered a very imperfect design, because of a poor layout, insufficient fire-power, a cramped interior and inferior mobility due to an overhanging nose section, which had been designed to crush through the belts of barbed wire but in practice caused the tank to get stuck. Improved designs were almost immediately initiated but the production of these, the Schneider CA 2, CA 3 and CA 4, was eventually cancelled.
The Schneider CA 1 tanks were widely used in combat during the last war years. Their first action on 16 April 1917 was largely a failure, the tank units suffering heavy losses, but later engagements were more successful. In 1918 the Schneider tanks played an important role in halting the German Spring Offensive and breaking the German front in the French summer offensives. They were active until the end of September 1918, less than two months before the Armistice of 11 November 1918, their numbers having dropped considerably due to attrition. After the war the surviving tanks were mostly rebuilt as utility vehicles but six Schneider tanks were deployed by Spain in the Rif War in Morocco and the type saw its last action in the beginning of the Spanish Civil War.
(Wikipedia)
I used royalty free music for this video.
"Gymnopedie" by "Satie"
"Runaways" by "Silent Partner"
"Catch a way" by "Everet Almond"
"Real Ride" by "Nicolai Heidlas"
REAL RIDE by Nicolai Heidlas Music / nicolai-heidlas
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons....
Music provided by Audio Library • Video
"Hooky with Sloane" by "Bird Creek"
"Killing with kindness" by "Jingle Punks"
"Fights" by "Silent Partner"
"No win" by "Silent Partner"
"Sleepy Jake" by "Silent Partner"
"Chasin it" by "Audionautix"
Chasin' It von Audionautix ist unter der Lizenz Creative Commons Attribution license (creativecommon...) lizenziert.
Interpret: audionautix.com/
"Up above" by "Letter Box".

Опубликовано:

 

26 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 115   
@AdamMann3D
@AdamMann3D 7 лет назад
Dude this was super on point and concise. Well edited in all the right ways.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
cheers buddy! it turned out shorter than i thought, which is good.
@ArmourEmpire
@ArmourEmpire 7 лет назад
truly looking forward to the fruition of this project. a ww1 dio will be a most impressive addition to the collection. keep up the good work and thanks for all the editing you've out in to this
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
thank you mark :) i have a lot of interest in ww1 and as a francophile i am wondering why i am not dealing with that subject more often?!
@papakilo135armor2
@papakilo135armor2 7 лет назад
Very impressive, I really like how you add missing details and tips on how to assemble it as well as filling in the holes. Nicely done !
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
thank you mike :)
@robertvoss6145
@robertvoss6145 7 лет назад
What a great way to spend part of my Saturday morning, watching you build an interesting kit. well done Michael, I enjoyed that 👍. can't wait to see the finished diorama as your mud and still water techniques are excellent.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
thank you for the appreciation :) i´m glad you like what i did so far.
@StevieTurtle37D
@StevieTurtle37D 6 лет назад
Really love this channel. Obscure tanks from WWI are a thing that I love and this channel gives me a better look at what I am purchasing. Thank You.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 6 лет назад
thank you very much for your approval :) i do ww1 subjects from time to time, not as often as i´d like to maybe. mainly figures.
@granskare
@granskare 7 лет назад
I always admire your command of the English language, and your modelling ability is flawless - thanks a lot for another great video :)
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
thank you very much for your kind words :)
@Felisbarcinonensis
@Felisbarcinonensis 7 лет назад
Great build Michael! Thanks for sharing the whole process :) The hole filling projectile tip is funny and useful. Love these "ugly" monters from WWI
@thogyt
@thogyt 7 лет назад
Felis Barcinonensis my favorite "Ugly" would be the St. Chamond assault tank
@Felisbarcinonensis
@Felisbarcinonensis 7 лет назад
Yes. I've got the Takom version; One wonders how could they even move with those bulky low hulls and wobbly little tracks. When I build it I'll probably show it trapped in mud and rubble
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
cheers felis :)
@williammcdorman6426
@williammcdorman6426 7 лет назад
I think that hole in the rear is for mounting the exhaust pipe on the model without the enlarged fuel tanks. Great build, thanks for the review and build.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
you are welcome! with regard to the hole in the rear plate, i agree, thats probably it.
@Grundag
@Grundag 7 лет назад
I cannot agree more! All of my builds have a research phase and folder before any plastic or metal is touched. Steve Zaloga is one of the most prolific authors out there for Armor and WWII. His books are always informative reads and extremely useful for whatever vehicle I am building. Excellent kit and build, sir. We need more Great War armor, always.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
cheers! i would not say that the research is half the job, but it certainly plays a very big role. i could have built this kit out of box and no one would have cared, but in this case i wanted to go the extra mile and make the model stand out a bit.
@mariowolf6292
@mariowolf6292 7 лет назад
wirklich gut gemacht und hilfreich. freu mich schon auf den nächsten Teil.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
vielen dank für das lob :)
@qdc748a
@qdc748a 7 лет назад
The assembled model looks great my friend! Thanks for putting it on RU-vid :)
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
thank you :) it shows that going the extra mile pays off!
@willabe566
@willabe566 7 лет назад
Hobby boss has to be one of the best model companies out there!
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
well, depends. i like their unusual subject choices!
@willabe566
@willabe566 7 лет назад
Hamilkar Barkas yeah, that's something Tamiya doesn't do which is a shame, they just pick the most iconic of tanks.
@HalidonDioramas
@HalidonDioramas 7 лет назад
Great job Michael, excellent build video. What an interesting looking tank, the dio should come up a treat.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
thank you :) i want to keep the dio small, the tank and the figures will create enough interest.
@Da7K_
@Da7K_ 7 лет назад
a kit building review after a long time, looking forward to the next parts :D
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
cheers!
@radzy76
@radzy76 7 лет назад
What an afwul looking crab masterpiece :) Nice progress so far Michael. Looking forward to see it painted with all these fancy WWI camo :)
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
cheers mate, i´m glad you enjoyed this! fancy camo indeed, that will be a nice change from field grey and olive drab.
@vallee1985
@vallee1985 7 лет назад
Mal wieder ein super Baubericht. Immer wieder schoen zu sehen wie "gleich" diese Fahrzeuge damals aufgebaut wahren. Ich hab erst vor kurzem denn A7V von Meng gebaut. Und das Laufwerk kommt dem A7V doch recht nahe, halt damalige stand der technik. Naja denn A7V habe ich noch nicht fertig gebaut. Da er mit komplettem Kampfraum kommt, ist die passgenauigkeit nicht so das wahre! Deswegen wurde er bis auf weiteres auf eis gelegt. Freue mich schon auf den naechsten Berich.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
vielen dank :) das fahrwerk war der standard bei landwirtschaftlichen schleppern denke ich. der schneider panzer zum beispiel verwendete eins zu eins den amerikanischen holt tractor als basis.
@raytheron
@raytheron 7 лет назад
Das war Spass, anzuschauen! Wieder ein nettes Video! Vielen Dank, Michael!
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
bitteschön :)
@sparkyholden3977
@sparkyholden3977 7 лет назад
Thank you so much for this, and your other videos. Learned so much and appreciate your efforts!
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
thank you very much for your praises :)
@thogyt
@thogyt 7 лет назад
Can't wait to see what you make this into
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
i am excited as well :)
@willabe566
@willabe566 7 лет назад
I'm excited for part 2!
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
me too :)
@lazzer2795
@lazzer2795 7 лет назад
da bin ich mit dir einer Meinung, ich nutze den Revell Contacta nach wie vor sehr gerne. einen anderen Kunststoff-Verschweiß-Kleber habe ich nie genutzt. der von Revell hat vor nun 19 Jahren seinen Dienst getan und noch heute ist er für mich ein geliebter ständiger Begleiter. Wahrscheinlich auch der Nostalgie wegen. Herrlich der Geruch!
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
ich denke auch, dass gewohnheit eine große rolle spielt :) der uhu plastik kleber zum beispiel riecht wirklich unangenehm...
@lazzer2795
@lazzer2795 7 лет назад
Hamilkar Barkas oh ja 😁 das Zeug riecht grausig. Aber der Contacta...Augen schließen, einmal kurz dran riechen und ich hab mein erstes Modell vor meinem geistigen Auge :)
@TheRealModelholic
@TheRealModelholic 7 лет назад
Super!! Ich freue mich auf den 2. Teil des Berichts:-)
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
Vorfreude ist bekanntlich die beste Freude :)
@TheRealModelholic
@TheRealModelholic 7 лет назад
Hamilkar Barkas Stimmt😁
@charlie418791
@charlie418791 7 лет назад
Cool build,Michael 👍It's hard to believe that they could even move.They weighed so much and were so underpowered....
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
indeed! cross country ability of a steel box..thats what it was :)
@charlie418791
@charlie418791 7 лет назад
You described it,exactly ! 👍
@Vuk_Stajic
@Vuk_Stajic 7 лет назад
Ughh your videos always make me want to build again! I am looking forward to seeing this completed. Those tracks are wack!
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
cheers :) i hope i can continue with this series soon.
@The187joe
@The187joe 7 лет назад
Schön mal wieder ein Baubericht zu sehen :) Ausführlich wie noch nie, gefällt mir :) Vllt ein tipp für stellen wo man mit der schleiflatte nicht hinkommt, ich schneide mir dafür immer kleine stücke schleifpapier zurecht, falte sie, und klemme sie dann in ein pinzette. Lg joe
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
danke dir :) das hatte ich auch vor, aber es kann da leicht passieren, dass man nur eine "mulde" herausschleift, weil der abtrag durch das schleifpapier zu punktuell ist. deswegen habe ich so etwas ähnliches nur für das letzte finish gemacht.
@The187joe
@The187joe 7 лет назад
Da hast du recht, muss man immer schön vorsichtig arbeiten, aber dennoch eine unverzichtbare methode wie ich finde :)
@williamstevenson4694
@williamstevenson4694 7 лет назад
thanks for the video, funny looking tank but looks good,and i do like the look of those tracks,look forward to seeing it all dun.have a good 1..will nz
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
you are welcome will :)
@bastim.722
@bastim.722 7 лет назад
Bin schon gespannt auf den nächsten Teil.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
Jetzt erstmal den ersten teil gucken :)
@omikron6218
@omikron6218 7 лет назад
B.M. Ich hab mir dein Profilbild bestellt, ich bin so gespannt bis es ankommt :D
@bastim.722
@bastim.722 7 лет назад
AppeFinger schön auf einen anderen Starwars fan zu treffen die sterben irgendwie aus😢
@RBAirsoft
@RBAirsoft 7 лет назад
Great video as always!
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
cheers!
@KruegerleDE
@KruegerleDE 7 лет назад
Ketzerei! Er hat Tamiya extra thin verwendet! Ein klasse Baubericht den du da angefangen hast! Sehr ausführlich. Interessantes Fahrzeug. Interessanter Krieg und hoffentlich bald ein wunderbares Diorama. Danke für den ersten Teil! :)
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
ich bin ein wahrer ketzer :D freut mich wenn es gefallen hat!
@sonofbrowntown6066
@sonofbrowntown6066 7 лет назад
Wieder sehr interessant mein Bester ! 😃 Bei der Videolänge wollt ich eigentlich in Ermangelung von Zeit zwischendurch vorspulen 😜 aber was soll ich sagen - ich konnte nicht. Die Angst etwas zu verpassen war zu groß 😁. Freu mich auf den nächsten Teil
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
das freut mich zu hören :) vielleicht ist ein ww1 panzer aus frankreich nicht das beste um jeden hinter dem ofen hervorzulocken, aber ich mache es trotzdem!
@sonofbrowntown6066
@sonofbrowntown6066 7 лет назад
Hamilkar Barkas und das ist auch gut so 👍😎
@mr.w4694
@mr.w4694 7 лет назад
schön wieder ein Video von dir zu sehen 😊👍
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
seit januar kam jede woche eins :)
@mr.w4694
@mr.w4694 7 лет назад
Hamilkar Barkas trotzdem ist die Freude groß (gerade bei Bauberichten) ;)
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
das freut mich :)
@louisdupreez9803
@louisdupreez9803 7 лет назад
Very nicely one sir, some good tips as well.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
thank you very much :)
@derkleinemodellbauer1328
@derkleinemodellbauer1328 7 лет назад
schönes Video also so zieht man aus den Rahmen Kabel/ Antenen sehr interessant werd ich mir merken
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
man kann auch mit etwas wärme (zb durch ein feuerzeug) die angeklebten kabel auch unter spannung setzen, was bei doppeldecker flugzeugen sehr praktisch ist.
@Zammpie
@Zammpie 7 лет назад
Toller Baubericht Michael. Konnte ein paar neue Sachen lernen. Ich bewundere deinen Contacta. Bei mir kommt entweder gar nichts, oder gleich der halbe Inhalt. Und damit bin ich noch nicht mal allein.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
danke dir :) da ist es wohl wie mit allem, wenn man es von anfang an gewöhnt ist fällt es einem leichter die nachteile des werkzeuges zu meistern. bis vor nicht allzulanger zeit habe ich nichts anderes als den contacta verwendet, da bekommt man einfach übung :)
@non-prolific135thscalemode7
@non-prolific135thscalemode7 7 лет назад
Extrem interessanter Bausatz! Mir gefällt die Optik sehr. Diese Treibstoffbehälter am Heck sind ja tödlich! Was haben sich die Konstrukteure dabei bloß gedacht? Der üble Spitzname ist jedenfalls verdient! Ich sehe, dass wir viele Dinge in der gleichen Weise tun. Und auch Revell Contacta Professional und Tamiya Extra Thin für dieselben Zwecke verwenden. Der Fluch guten Referenzmaterials ist, dass man zu oft Mängel am Modell aufdeckt. Die Geschichte mit dem Schild ist so ein Fall. Ich denke, dass ich das genauso gemacht hätte wie Du, angefangen beim Verschließen der beiden Löcher. Scratchbuilding muss nicht immer unglaublich kompliziert sein und wenn man etwas ohne größeren Aufwand verändern kann, muss man auch kein Geld für Aftermarket-Sets ausgeben. Was die Kette betrifft, gebe ich Dir recht. Ganz normale Einzelglieder hätten ausgereicht. Letzten Endes ist aber alles besser als Gummiflitschen! :)
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
kein übler bausatz, kann man schon gut bauen :) die sprittanks am heck sind ja schon die verbesserung, vorher war der tank vorne im bug! naja, war eben noch alles nicht so ausgereicht und durchdacht. es freut mich dass es interessant für dich war :)
@non-prolific135thscalemode7
@non-prolific135thscalemode7 7 лет назад
Ja, das ist wohl wahr. Aber irgendwie ist dieses Fahrzeug schon der Vorläufer des M113, den ich so richtig mag. Der hat ja in den neueren Ausführungen ebenfalls diese Tanks am Heck, wie auch der Bradley. Mir macht es Spaß, diese Entwicklungen zu verfolgen, wenn ich auch nicht wirklich an modernen Panzern etc. interessiert bin. :)
@invincible6197
@invincible6197 7 лет назад
another excellent quality build! can you give me some advice please? I'm hoping to build a diorama of an Sdkfz 251 undergoing maintenance in Russia, in autumn 1942. I've built the '251, and know what equipment I'll need. can you recommend any affordable 1/35 trucks and figures suitable for a muddy scene away from the fighting?
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
cheers! ICM makes a bunch of very nice german trucks and the zvezda l4500 truck is very good, too. when it comes to figures, there is a masterbox figure set called "auto repair crew" that would fit in.
@invincible6197
@invincible6197 7 лет назад
Hamilkar Barkas thank you! I'll have a look at them.
@rickmoreno6858
@rickmoreno6858 3 года назад
I need this kit in my stash. I have this overwhelming urge and want to build a ww1 dio with this tank and infantry. Attacking a German trench.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 3 года назад
Good idea! This kit is good, but the tracks are really not fun at all to build. It is possible, but very tedious...
@StevieTurtle37D
@StevieTurtle37D 6 лет назад
Still no Sturmpanzerwagen Oberschlesiein model anywhere
@ethan5354
@ethan5354 7 лет назад
I have a question about pronouncing years in German When I want to say "1916", would I say Neunzehnhundert sechzehn all the time? Or would it be appropriate to just say "Neunzehnsechszehn"?
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
neunzehnsechzehn works for any normal conversation and when refering to years, but as soon as you have to be more specific you will use the actually correct term neunzehnhundertsechzehn (for the year) or eintausendneunhundertsechzehn (for any other numbers).
@ethan5354
@ethan5354 7 лет назад
Thanks for the answer
@igorrabinovich3386
@igorrabinovich3386 7 лет назад
Great job, BTW what kind of sanding sticks are you using. Thanks.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
they are albion alloys sticks and also selfmade ones: sections of an old pocket rule, double sided tape and sanding paper. the selfmade ones are technically actually better and cost almost nothing to make.
@igorrabinovich3386
@igorrabinovich3386 7 лет назад
Thanks a lot, i very respect your works.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
that is very much appreciated, thank you very much for the approval :)
@KEM451
@KEM451 7 лет назад
Nice work! What gel are you going to use to represent the clear lens?
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
i´ll probably use micro crystal clear or wood glue.
@KEM451
@KEM451 7 лет назад
Won't either of those dimple once they dry? I guess you could use a large amount then sand and polish it down; or build it up in layers. The reason I ask is because I always run into this issue with the vision blocks on armored vehicles. Any headlights / spotlights are usually large enough to show any flaws where as the vision blocks are not as noticeable. I've tried different gels, liquid glass for bead making and clear glues. They work on small lenses / areas; but for larger ones I always end up cutting one to shape from clear packaging plastic. One thing I haven't tried yet is clear, non-shrink silicon caulking. I know it does not dry crystal clear; but for certain cases it just might pass (Soviet WW2 headlights come to mind). Keep up the great work. Watching you has always been an inspiration.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
Well, wood glue becomes slightly foggy and crystal clear is designed for that prupose and works like a charm. i used it a couple of times before.
@KEM451
@KEM451 7 лет назад
I'm certain what ever route you take it will come out looking good. You've shown your skill at modeling repeatedly so I have no doubt the end result will be a work of art.
@LeanderJobse
@LeanderJobse 7 лет назад
You could have filled the holes with putty. Cover the outside, with tape or something like that, and apply putty from the inside. Worked well for me last time when I had to fill a hole. it has to be open from the inside ofc. I don't know if that was the case with this build.
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
of course i could have done that, but my intention was to show an alternative approach. a very easy one indeed and less messy.
@LeanderJobse
@LeanderJobse 7 лет назад
Hamilkar Barkas that's quite nice actually. watching the same tricks over and over again becomes quite boring over time and I like change. it's a very nice build and I appreciate your effort to make the shield on the roof stand up, the little things make it unique. Grüße aus die Niederlande (if I spelled that correctly ;)
@corradolaccetti1209
@corradolaccetti1209 5 лет назад
great great great
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 5 лет назад
Thanks :)
@granskare
@granskare 6 лет назад
this superior to those the Brits used.
@joshuasanders4515
@joshuasanders4515 7 лет назад
Mach bitte mehr Bauberichte
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
wenn ich zeit und lust dafür habe jederzeit :)
@martinhubsch8287
@martinhubsch8287 7 лет назад
gefällt mir, nicht immer die englischen MK III oder MK IV.....
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
das freut mich zu hören :)
@granskare
@granskare 6 лет назад
likely Hobby Boss lost a worker and the new person was not up to speed. btw, did you hear of the guy who was at tweeter, on his last day, he closed Trump's account - lots of fun for us anti-Trumpers :)
@lukassarbacher6770
@lukassarbacher6770 7 лет назад
Wo bekommst du deine Fachliteratur her?? Nebenbei : das hässlichste Fahrzeug das ich jemals gesehen habe!!
@HamilkarBarkasScaleModelling
@HamilkarBarkasScaleModelling 7 лет назад
solche bücher gibt es meistens auch bei den online shops, die bausätze verkaufen, ansonsten ebay oder amazon.
@lukassarbacher6770
@lukassarbacher6770 7 лет назад
Hamilkar Barkas danke weil in Sachen panzerliteratur hab ich jetzt so ziemlich alles was es auf amazon gibt
Далее
Это ваши Патрики ?
00:33
Просмотров 24 тыс.
Crazy WW1 Tanks & Armored Cars Size Comparison 3D
8:55
Building the Airfix Vintage Classics 1:76 Stug III
10:49
Let's Paint The Saddest Tank Ever! (A7V, Meng 1/35)
13:22
Meng FT-17 French Light Tank [1:35]
31:56
Просмотров 11 тыс.
Это ваши Патрики ?
00:33
Просмотров 24 тыс.